[U-Boot] [PATCH] mx53: Make PLL2 to be the parent of UART clock

[Stefano Babic <sbabic@denx.de>]

On 21/03/2012 16:42, Fabio Estevam wrote:
> Change the parent UART clock to be PLL2, so that U-boot can also boot
> a Freescale 2.6.35 kernel for mx53.
> 
> FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid
> conflicts with IPU clocks, so that the video resolution can be changed
> without affecting the UART clock. 
> 
> On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded
> and this patch fixes this problem.
> 
> Tested on a mx53loco board booting a FSL kernel and also a mainline kernel.
> 
> Reported-by: Otavio Salvador <otavio@ossystems.com.br>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================