From: Donghwa Lee <dh09.lee@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers
Date: Fri, 30 Mar 2012 10:23:59 +0900 [thread overview]
Message-ID: <4F750B2F.40501@samsung.com> (raw)
In-Reply-To: <CALrBrZ1Hyu+rFsL+BHC=r4QrkpTa4pORup5B4Hi-BXz=nFpGhA@mail.gmail.com>
Hi,
On 29 March 2012 23:37, Minkyu Kang wrote:
> Dear Donghwa,
>
> On 29 March 2012 17:50, Donghwa Lee <dh09.lee@samsung.com> wrote:
>> This is definition of system registers for EXYNOS SoC.
>>
>> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>> arch/arm/include/asm/arch-exynos/cpu.h | 2 +
>> arch/arm/include/asm/arch-exynos/system.h | 51 +++++++++++++++++++++++++++++
>> 2 files changed, 53 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/include/asm/arch-exynos/system.h
>>
>> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
>> index 89f2c2e..70048f0 100644
>> --- a/arch/arm/include/asm/arch-exynos/cpu.h
>> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
>> @@ -29,6 +29,7 @@
>> /* EXYNOS4 */
>> #define EXYNOS4_GPIO_PART3_BASE 0x03860000
>> #define EXYNOS4_PRO_ID 0x10000000
>> +#define EXYNOS4_SYSREG_BASE 0x10010000
>> #define EXYNOS4_POWER_BASE 0x10020000
>> #define EXYNOS4_SWRESET 0x10020400
>> #define EXYNOS4_CLOCK_BASE 0x10030000
>
> need base address of exynos5 also.
>
SYSREG_BASE address of exynos5 was already included in this file.
>> diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h
>> new file mode 100644
>> index 0000000..2e99c0d
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-exynos/system.h
>> @@ -0,0 +1,51 @@
>> +/*
>> + * (C) Copyright 2012 Samsung Electronics
>> + * Donghwa Lee <dh09.lee@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + *
>> + */
>> +
>> +#ifndef __ASM_ARM_ARCH_SYSTEM_H_
>> +#define __ASM_ARM_ARCH_SYSTEM_H_
>> +
>> +#ifndef __ASSEMBLY__
>> +struct exynos4_sysreg {
>> + unsigned char res1[0x210];
>> + unsigned int display_ctrl;
>> + unsigned int display_ctrl2;
>> + unsigned int camera_control;
>> + unsigned int audio_endian;
>> + unsigned int jtag_con;
>> +};
>> +
>> +struct exynos5_sysreg {
>> + unsigned char res1[0x214];
>> + unsigned int disp1blk_cfg;
>> + unsigned int disp2blk_cfg;
>> + unsigned int hdcp_e_fuse;
>> + unsigned int gsclblk_cfg0;
>> + unsigned int gsclblk_cfg1;
>> + unsigned int reserved;
>> + unsigned int ispblk_cfg;
>> + unsigned int usb20phy_cfg;
>> + unsigned int mipi_dphy;
>> + unsigned int dptx_dphy;
>> + unsigned int phyclk_sel;
>> +};
>> +#endif
>> +
>> +#endif /* _EXYNOS4_SYSTEM_H */
>> --
>
> Where is it use?
> Need codes for using it.
>
This is used to control various signal of exynos. For example, it can contorl to FIMD of LBLK0 bypass selection.
Thank you,
Donghwa Lee.
next prev parent reply other threads:[~2012-03-30 1:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-29 8:50 [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers Donghwa Lee
2012-03-29 14:37 ` Minkyu Kang
2012-03-30 1:23 ` Donghwa Lee [this message]
2012-03-30 1:28 ` Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F750B2F.40501@samsung.com \
--to=dh09.lee@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.