Bug in v7_coherent_kern_range() ?

[dirk.behme@googlemail.com (Dirk Behme)]

Hi Huang Shijie,

On 01.04.2012 05:21, Huang Shijie wrote:
> [1] Platform:
> freescale's IMX6Q(4 cores) , ARM CORTEX-A9
>
> [2] kernel:
> 3.0.15(I have cherry-picked many patches, and the arch/arm/mm/cache-v7.S
> is same code with the latest kernel v3.4-rc1)
> enable SMP, VIPT,

Could you try an unpatched, clean v3.4-rc1 instead?

What's about your 2.6.38?

What's about 3.0.26? 3.0.15 seems to miss some maybe relevant patches.

> [3] application:

Could you share a (simple) test case?

Best regards

Dirk

> I use our our application which will clone many threads,
> two threads (assume as A and B) may do the same thing at the same time
> as the following code:
>
> In most of the time, it's ok.
> But in some unknown situation, cacheflush() failed and one threads
> (assume A) may hung up in the following code:
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> open("/usr/lib/lib_mp3_dec_arm12_elinux.so.2.10.0", O_RDONLY) = 8
> read(8,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\20\35\0\0004\0\0\0"...,
> 512) = 512
> fstat64(8, {st_mode=S_IFREG|0644, st_size=56232, ...}) = 0
> mmap2(NULL, 88032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 8, 0)
> = 0x2ff0a000
> mprotect(0x2ff18000, 28672, PROT_NONE) = 0
> mmap2(0x2ff1f000, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 8, 0xd) = 0x2ff1f000
> close(8) = 0
> mprotect(0x2ff0a000, 57344, PROT_READ|PROT_WRITE) = 0
> mprotect(0x2ff0a000, 57344, PROT_READ|PROT_EXEC) = 0
> cacheflush(0x2ff0a000, 0x2ff18000, 0, 0x6, 0x2cd03420) = 0 // System
> hung up here!!!
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> [4] kernel log
> I use "echo t>  /proc/sysrq-trigger" to show the tasks's information:
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> multiqueue0:src D 804cd678 0 7328 5963 0x00000001
> [<804cd678>] (__schedule+0x228/0x760) from [<804d0564>]
> (__down_read+0xa8/0xe0)
> [<804d0564>] (__down_read+0xa8/0xe0) from [<800478c4>]
> (do_page_fault+0xbc/0x480)
> [<800478c4>] (do_page_fault+0xbc/0x480) from [<8003841c>]
> (do_DataAbort+0x34/0x98)
> [<8003841c>] (do_DataAbort+0x34/0x98) from [<8003df10>]
> (__dabt_svc+0x70/0xa0)
> Exception stack(0xbae37ea8 to 0xbae37ef0)
> 7ea0: 31e05000 31e1d000 00000020 0000001f 31e05000 31e1d000
> 7ec0: bfac86b8 31e05000 31e1d000 bae36000 08100075 31e056fc 31e08000
> bae37ef0
> 7ee0: 800424a8 8004a1fc 800f0013 ffffffff
> [<8003df10>] (__dabt_svc+0x70/0xa0) from [<8004a1fc>]
> (v7_coherent_kern_range+0x20/0x80)
> [<8004a1fc>] (v7_coherent_kern_range+0x20/0x80) from [<800424a8>]
> (arm_syscall+0x2a0/0x2c4)
> [<800424a8>] (arm_syscall+0x2a0/0x2c4) from [<8003e500>]
> (ret_fast_syscall+0x0/0x3c)
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> The do_cache_op() has already held the mm->mmap_sem, but
> v7_coherent_kern_range()
> cause one page fault during it flush the cache. deadlock! So it hung up
> in the do_page_fault().
>
> [5] questions:
> Why the v7_coherent_kern_range() can caused the data abort?
> Is there something wrong about the v7_coherent_kern_range()?
>
>
> thanks
> Huang Shijie
>
>
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>