From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
To: Or Gerlitz <ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: mlx4: kernel 3.4-rc1 breaks libumad
Date: Mon, 02 Apr 2012 11:48:50 +0000 [thread overview]
Message-ID: <4F799222.3050306@acm.org> (raw)
In-Reply-To: <4F798B9A.6090309-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
On 04/02/12 11:20, Or Gerlitz wrote:
> On 4/2/2012 2:16 PM, Bart Van Assche wrote:
>> On 04/02/12 10:33, Or Gerlitz wrote:
>>
>> As far as I can see the link layer value is fine:
>> $ cat /sys/class/infiniband/mlx4_0/ports/1/link_layer
>> InfiniBand
>> $ cat /sys/class/infiniband/mlx4_0/ports/2/link_layer
>> InfiniBand
>
> So the two ports are actually connected to IB switch? please send
> ibv_devinfo output (HCA, firmware, etc).
The two ports are connected back-to-back to another mlx4 HCA. I noticed this behavior change since opensm stopped working after rebooting into 3.4-rc1. ibv_devinfo output is as follows:
# ibv_devinfo -v
hca_id: mlx4_0
transport: InfiniBand (0)
fw_ver: 2.9.1000
node_guid: 0002:c903:0005:f34e
sys_image_guid: 0002:c903:0005:f351
vendor_id: 0x02c9
vendor_part_id: 26428
hw_ver: 0xA0
board_id: MT_0BB0120003
phys_port_cnt: 2
max_mr_size: 0xffffffffffffffff
page_size_cap: 0xfffffe00
max_qp: 131008
max_qp_wr: 16384
device_cap_flags: 0x007c9c76
max_sge: 32
max_sge_rd: 0
max_cq: 65408
max_cqe: 4194303
max_mr: 524272
max_pd: 32764
max_qp_rd_atom: 16
max_ee_rd_atom: 0
max_res_rd_atom: 2096128
max_qp_init_rd_atom: 128
max_ee_init_rd_atom: 0
atomic_cap: ATOMIC_HCA (1)
max_ee: 0
max_rdd: 0
max_mw: 0
max_raw_ipv6_qp: 0
max_raw_ethy_qp: 0
max_mcast_grp: 8192
max_mcast_qp_attach: 248
max_total_mcast_qp_attach: 2031616
max_ah: 0
max_fmr: 0
max_srq: 65472
max_srq_wr: 16383
max_srq_sge: 31
max_pkeys: 128
local_ca_ack_delay: 15
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 1
port_lid: 1
port_lmc: 0x00
link_layer: InfiniBand
max_msg_sz: 0x40000000
port_cap_flags: 0x0251086a
max_vl_num: 4 (3)
bad_pkey_cntr: 0x0
qkey_viol_cntr: 0x0
sm_sl: 0
pkey_tbl_len: 128
gid_tbl_len: 128
subnet_timeout: 18
init_type_reply: 0
active_width: 4X (2)
active_speed: 10.0 Gbps (4)
phys_state: LINK_UP (5)
GID[ 0]: fe80:0000:0000:0000:0002:c903:0005:f34f
port: 2
state: PORT_INIT (2)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: InfiniBand
max_msg_sz: 0x40000000
port_cap_flags: 0x02510868
max_vl_num: 4 (3)
bad_pkey_cntr: 0x0
qkey_viol_cntr: 0x0
sm_sl: 0
pkey_tbl_len: 128
gid_tbl_len: 128
subnet_timeout: 0
init_type_reply: 0
active_width: 4X (2)
active_speed: 10.0 Gbps (4)
phys_state: LINK_UP (5)
GID[ 0]: fe80:0000:0000:0000:0002:c903:0005:f350
Bart.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-04-02 11:48 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-02 7:42 mlx4: kernel 3.4-rc1 breaks libumad Bart Van Assche
[not found] ` <4F795880.4070306-HInyCGIudOg@public.gmane.org>
2012-04-02 10:33 ` Or Gerlitz
[not found] ` <4F798069.4030305-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2012-04-02 11:16 ` Bart Van Assche
[not found] ` <4F798A9B.7060805-HInyCGIudOg@public.gmane.org>
2012-04-02 11:20 ` Or Gerlitz
[not found] ` <4F798B9A.6090309-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2012-04-02 11:48 ` Bart Van Assche [this message]
[not found] ` <4F799222.3050306-HInyCGIudOg@public.gmane.org>
2012-04-02 12:51 ` Or Gerlitz
[not found] ` <4F79A0C5.2030805-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2012-04-02 13:02 ` Or Gerlitz
[not found] ` <4F79A359.2020204-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2012-04-02 13:25 ` Hal Rosenstock
[not found] ` <4F79A8C4.5000604-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2012-04-02 14:10 ` Hal Rosenstock
2012-04-02 14:51 ` Or Gerlitz
2012-04-03 21:37 ` Ira Weiny
2012-04-02 13:35 ` Bart Van Assche
[not found] ` <4F79AB24.2090200-HInyCGIudOg@public.gmane.org>
2012-04-02 14:06 ` Or Gerlitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F799222.3050306@acm.org \
--to=bvanassche-hinycgiudog@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.