From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from hermes.mlbassoc.com ([64.234.241.98]:46318 "EHLO mail.chez-thomas.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750818Ab2DBMY7 (ORCPT ); Mon, 2 Apr 2012 08:24:59 -0400 Message-ID: <4F799A99.9010209@mlbassoc.com> Date: Mon, 02 Apr 2012 06:24:57 -0600 From: Gary Thomas MIME-Version: 1.0 To: linux-media@vger.kernel.org CC: Laurent Pinchart Subject: OMAP3ISP won't start Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: I'm testing Laurent's tree with the BT656 support. My system has an OMAP/3530 + TVP5150 running in BT656 mode. Sadly, this isn't working - I only get an endless stream of these messages [ 43.457427] omap3isp omap3isp: CCDC won't become idle! [ 43.490814] omap3isp omap3isp: CCDC won't become idle! I've compared the operation between a similarly patched 3.2 system and the current 3.3. All OMAP3 CCDC registers are identical, as well as the TVP5150 registers at the time that streaming is enabled. Any ideas what might be wrong? where else to look? Thanks Just to be clear - I did have to make a few patches to both the TVP5150 driver and CCDC part of OMAP3ISP as some of the BT656 support is still not in Laurent's tree. I'll send patches, etc, once I get it working, but as mentioned above, at least at the register level, these are set up the same as in my working tree. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------