diff for duplicates of <4F7F320B.8080608@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 9c128a0..2e38c08 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -18,12 +18,12 @@ On 04/01/2012 01:58 PM, Mark Brown wrote: > systems as probably at least one of these devices will be active and > cause AMBA to hold the supply on anyway. > -> Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> +> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> > --- This and pl011 fixes are needed to get highbank working with 3.4, so: -Tested-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> +Tested-by: Rob Herring <rob.herring@calxeda.com> Rob @@ -183,10 +183,3 @@ Rob > /* Some drivers don't use the struct amba_device */ > #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) > #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) - - ------------------------------------------------------------------------------- -For Developers, A Lot Can Happen In A Second. -Boundary is the first to Know...and Tell You. -Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! -http://p.sf.net/sfu/Boundary-d2dvs2 diff --git a/a/content_digest b/N1/content_digest index cccdd24..04c3269 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,15 +1,8 @@ "ref\01333306720-28344-1-git-send-email-broonie@opensource.wolfsonmicro.com\0" - "ref\01333306720-28344-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org\0" - "From\0Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Subject\0Re: [PATCH/RFC v2] ARM: amba: Remove AMBA level regulator support\0" + "From\0robherring2@gmail.com (Rob Herring)\0" + "Subject\0[PATCH/RFC v2] ARM: amba: Remove AMBA level regulator support\0" "Date\0Fri, 06 Apr 2012 13:12:27 -0500\0" - "To\0Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>\0" - "Cc\0Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>" - Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> - Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org - " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 04/01/2012 01:58 PM, Mark Brown wrote:\n" @@ -32,12 +25,12 @@ "> systems as probably at least one of these devices will be active and\n" "> cause AMBA to hold the supply on anyway.\n" "> \n" - "> Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>\n" + "> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>\n" "> ---\n" "\n" "This and pl011 fixes are needed to get highbank working with 3.4, so:\n" "\n" - "Tested-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>\n" + "Tested-by: Rob Herring <rob.herring@calxeda.com>\n" "\n" "Rob\n" "\n" @@ -196,13 +189,6 @@ "> -\n" "> /* Some drivers don't use the struct amba_device */\n" "> #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)\n" - "> #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)\n" - "\n" - "\n" - "------------------------------------------------------------------------------\n" - "For Developers, A Lot Can Happen In A Second.\n" - "Boundary is the first to Know...and Tell You.\n" - "Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!\n" - http://p.sf.net/sfu/Boundary-d2dvs2 + > #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) -f3012ffd563d1b9afb1fdeb4bd4c43af1ecbb3f95635755ac94b06ca2920f0da +24107c57cf53c6040473373786949307a3b118081aa399371c9abf41fe0b1f1a
diff --git a/a/1.txt b/N2/1.txt index 9c128a0..2e38c08 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -18,12 +18,12 @@ On 04/01/2012 01:58 PM, Mark Brown wrote: > systems as probably at least one of these devices will be active and > cause AMBA to hold the supply on anyway. > -> Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> +> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> > --- This and pl011 fixes are needed to get highbank working with 3.4, so: -Tested-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> +Tested-by: Rob Herring <rob.herring@calxeda.com> Rob @@ -183,10 +183,3 @@ Rob > /* Some drivers don't use the struct amba_device */ > #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) > #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) - - ------------------------------------------------------------------------------- -For Developers, A Lot Can Happen In A Second. -Boundary is the first to Know...and Tell You. -Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! -http://p.sf.net/sfu/Boundary-d2dvs2 diff --git a/a/content_digest b/N2/content_digest index cccdd24..c047394 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,15 +1,15 @@ "ref\01333306720-28344-1-git-send-email-broonie@opensource.wolfsonmicro.com\0" - "ref\01333306720-28344-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org\0" - "From\0Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "From\0Rob Herring <robherring2@gmail.com>\0" "Subject\0Re: [PATCH/RFC v2] ARM: amba: Remove AMBA level regulator support\0" "Date\0Fri, 06 Apr 2012 13:12:27 -0500\0" - "To\0Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>\0" - "Cc\0Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>" - Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> - Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org - " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" + "To\0Mark Brown <broonie@opensource.wolfsonmicro.com>\0" + "Cc\0Russell King <linux@arm.linux.org.uk>" + Grant Likely <grant.likely@secretlab.ca> + Linus Walleij <linus.walleij@linaro.org> + Samuel Ortiz <sameo@linux.intel.com> + spi-devel-general@lists.sourceforge.net + linux-kernel@vger.kernel.org + " linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 04/01/2012 01:58 PM, Mark Brown wrote:\n" @@ -32,12 +32,12 @@ "> systems as probably at least one of these devices will be active and\n" "> cause AMBA to hold the supply on anyway.\n" "> \n" - "> Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>\n" + "> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>\n" "> ---\n" "\n" "This and pl011 fixes are needed to get highbank working with 3.4, so:\n" "\n" - "Tested-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>\n" + "Tested-by: Rob Herring <rob.herring@calxeda.com>\n" "\n" "Rob\n" "\n" @@ -196,13 +196,6 @@ "> -\n" "> /* Some drivers don't use the struct amba_device */\n" "> #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)\n" - "> #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)\n" - "\n" - "\n" - "------------------------------------------------------------------------------\n" - "For Developers, A Lot Can Happen In A Second.\n" - "Boundary is the first to Know...and Tell You.\n" - "Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!\n" - http://p.sf.net/sfu/Boundary-d2dvs2 + > #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) -f3012ffd563d1b9afb1fdeb4bd4c43af1ecbb3f95635755ac94b06ca2920f0da +26248e9717b5194635d4b8cc081eeb5fb66f5843c275a24f3509aaf316321025
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.