From: Jiang Liu <jiang.liu@huawei.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <liuj97@gmail.com>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Keping Chen <chenkeping@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH 2/2] PCI, ACPI, x86: update MMCFG information when hot-plugging PCI host bridges
Date: Mon, 09 Apr 2012 11:43:06 +0800 [thread overview]
Message-ID: <4F825ACA.1040800@huawei.com> (raw)
In-Reply-To: <CAE9FiQXNOJA4oCDw-CF32UjaA=6tri73nXP3u6+hMEjpugjF9w@mail.gmail.com>
Hi Yinghai,
Thanks for your comments and will send out another version
according to your suggestions.
On 2012-4-9 3:19, Yinghai Lu wrote:
> On Sun, Apr 8, 2012 at 10:12 AM, Jiang Liu<liuj97@gmail.com> wrote:
>> This patch enhances pci_root driver to update MMCFG information when
>> hot-plugging PCI root bridges on x86 platforms.
>>
>> Signed-off-by: Jiang Liu<jiang.liu@huawei.com>
>> ---
>> arch/x86/pci/acpi.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/acpi/pci_root.c | 20 ++++++++++++++++
>> include/acpi/acnames.h | 1 +
>> include/linux/pci-acpi.h | 3 ++
>> 4 files changed, 82 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
>> index da0149d..9184970 100644
>> --- a/arch/x86/pci/acpi.c
>> +++ b/arch/x86/pci/acpi.c
>> @@ -488,6 +488,64 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
>> return bus;
>> }
>>
>> +int arch_acpi_pci_root_add(struct acpi_pci_root *root)
>> +{
>> + int result = 0;
>> + acpi_status status;
>> + unsigned long long base_addr;
>> + struct pci_mmcfg_region *cfg;
>> +
>> + /*
>> + * Try to insert MMCFG information for host bridges with _CBA method
>> + */
>> + status = acpi_evaluate_integer(root->device->handle, METHOD_NAME__CBA,
>> + NULL,&base_addr);
>> + if (ACPI_SUCCESS(status)) {
>> + result = pci_mmconfig_insert(root->segment,
>> + root->secondary.start,
>> + root->secondary.end,
>> + base_addr);
>> + /*
>> + * MMCFG information for hot-pluggable host bridges may have
>> + * already been added by __pci_mmcfg_init();
>> + */
>> + if (result == -EEXIST)
>> + result = 0;
>> + } else if (status == AE_NOT_FOUND) {
>> + /*
>> + * Check whether MMCFG information has been added for
>> + * host bridges without _CBA method.
>> + */
>> + rcu_read_lock();
>> + cfg = pci_mmconfig_lookup(root->segment, root->secondary.start);
>> + if (!cfg || cfg->end_bus< root->secondary.end)
>> + result = -ENODEV;
>> + rcu_read_unlock();
>> + } else
>> + result = -ENODEV;
>> +
>> + return result;
>> +}
>> +
>> +int arch_acpi_pci_root_remove(struct acpi_pci_root *root)
>> +{
>> + acpi_status status;
>> + unsigned long long base_addr;
>> +
>> + /* Remove MMCFG information for host bridges with _CBA method */
>> + status = acpi_evaluate_integer(root->device->handle, METHOD_NAME__CBA,
>> + NULL,&base_addr);
>
> add one flag in acpi_pci_root about we added mmconf for it before?
> like mmconf_added?
>
>> + if (ACPI_SUCCESS(status))
>> + return pci_mmconfig_delete(root->segment,
>> + root->secondary.start,
>> + root->secondary.end,
>> + base_addr);
>> + else if (status != AE_NOT_FOUND)
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> int __init pci_acpi_init(void)
>> {
>> struct pci_dev *dev = NULL;
>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>> index 4a7d575..a62bfa8 100644
>> --- a/drivers/acpi/pci_root.c
>> +++ b/drivers/acpi/pci_root.c
>> @@ -448,6 +448,16 @@ out:
>> }
>> EXPORT_SYMBOL(acpi_pci_osc_control_set);
>>
>> +int __weak arch_acpi_pci_root_add(struct acpi_pci_root *root)
>> +{
>> + return 0;
>> +}
>> +
>> +int __weak arch_acpi_pci_root_remove(struct acpi_pci_root *root)
>> +{
>> + return 0;
>> +}
>> +
>> static int __devinit acpi_pci_root_add(struct acpi_device *device)
>> {
>> unsigned long long segment, bus;
>> @@ -504,6 +514,14 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
>> strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>> device->driver_data = root;
>>
>> + if (arch_acpi_pci_root_add(root)) {
>> + printk(KERN_ERR PREFIX
>> + "can't add MMCFG information for Bus %04x:%02x\n",
>> + root->segment, (unsigned int)root->secondary.start);
>> + result = -ENODEV;
>> + goto out_free;
>> + }
>> +
>> /*
>> * All supported architectures that use ACPI have support for
>> * PCI domains, so we indicate this in _OSC support capabilities.
>> @@ -629,6 +647,7 @@ out_del_root:
>> list_del_rcu(&root->node);
>> mutex_unlock(&acpi_pci_root_lock);
>> synchronize_rcu();
>> + arch_acpi_pci_root_remove(root);
>> out_free:
>> kfree(root);
>> return result;
>> @@ -679,6 +698,7 @@ out:
>> list_del_rcu(&root->node);
>> mutex_unlock(&acpi_pci_root_lock);
>> synchronize_rcu();
>> + arch_acpi_pci_root_remove(root);
>> kfree(root);
>>
>> return 0;
>> diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
>> index 38f5088..99bda75 100644
>> --- a/include/acpi/acnames.h
>> +++ b/include/acpi/acnames.h
>> @@ -62,6 +62,7 @@
>> #define METHOD_NAME__AEI "_AEI"
>> #define METHOD_NAME__PRW "_PRW"
>> #define METHOD_NAME__SRS "_SRS"
>> +#define METHOD_NAME__CBA "_CBA"
>>
>> /* Method names - these methods must appear at the namespace root */
>>
>> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
>> index ac93634..816b971 100644
>> --- a/include/linux/pci-acpi.h
>> +++ b/include/linux/pci-acpi.h
>> @@ -38,6 +38,9 @@ static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
>>
>> void acpi_pci_root_rescan(void);
>>
>> +extern int arch_acpi_pci_root_add(struct acpi_pci_root *root);
>> +extern int arch_acpi_pci_root_remove(struct acpi_pci_root *root);
>> +
>
> don't need extern here.
>
>> #else
>>
>> static inline void acpi_pci_root_rescan(void) { }
>> --
>> 1.7.5.4
>>
>
> .
>
next prev parent reply other threads:[~2012-04-09 3:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-06 2:59 [PATCH] [RFC] PCI, ACPI, x86: MMCFG support for hotpluggable PCI hostbridges on x86, x86_64 Taku Izumi
2012-04-06 6:31 ` Kenji Kaneshige
2012-04-06 11:15 ` Taku Izumi
2012-04-06 11:16 ` Taku Izumi
2012-04-07 15:20 ` Jiang Liu
2012-04-25 17:14 ` Bjorn Helgaas
2012-04-26 2:55 ` Taku Izumi
2012-04-07 15:09 ` Jiang Liu
2012-04-08 17:12 ` [PATCH RFC 0/2] PCI, x86: update MMCFG information when hot-plugging PCI host bridges Jiang Liu
2012-04-25 17:17 ` Bjorn Helgaas
2012-04-08 17:12 ` [PATCH 1/2] PCI,x86: introduce new MMCFG interfaces to support PCI host bridge hotplug Jiang Liu
2012-04-08 19:12 ` Yinghai Lu
2012-04-08 17:12 ` [PATCH 2/2] PCI, ACPI, x86: update MMCFG information when hot-plugging PCI host bridges Jiang Liu
2012-04-08 19:19 ` Yinghai Lu
2012-04-09 3:43 ` Jiang Liu [this message]
2012-04-09 14:37 ` Jiang Liu
2012-04-09 15:11 ` Yinghai Lu
2012-04-09 20:48 ` Yinghai Lu
2012-04-09 11:43 ` Kenji Kaneshige
2012-04-09 16:02 ` Jiang Liu
2012-04-10 10:32 ` Kenji Kaneshige
2012-04-10 15:47 ` Yinghai Lu
2012-04-10 16:05 ` Jiang Liu
2012-04-10 16:01 ` Jiang Liu
2012-05-02 23:55 ` Bjorn Helgaas
2012-05-03 6:39 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F825ACA.1040800@huawei.com \
--to=jiang.liu@huawei.com \
--cc=bhelgaas@google.com \
--cc=chenkeping@huawei.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liuj97@gmail.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.