From mboxrd@z Thu Jan  1 00:00:00 1970
From: likewhoa <likewhoa@weboperative.com>
Subject: Re: raid10 issues after reorder of boot drives.
Date: Fri, 27 Apr 2012 20:35:20 -0400
Message-ID: <4F9B3B48.8020900@weboperative.com>
References: <4F9AFBC6.7070803@weboperative.com> <4F9B14FA.1090001@weboperative.com> <20120428080522.637bc564@notabene.brown> <4F9B2BE1.5080207@weboperative.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Return-path: <linux-raid-owner@vger.kernel.org>
In-Reply-To: <4F9B2BE1.5080207@weboperative.com>
Sender: linux-raid-owner@vger.kernel.org
To: NeilBrown <neilb@suse.de>
Cc: "linux-raid@vger.kernel.org" <linux-raid@vger.kernel.org>
List-Id: linux-raid.ids

I am not sure how to proceed now with the output that shows possible
pairs as it won't allow me to setup all 8 devices on the array but only
4. Should I run the array creation with -x4 and set the available spare
devicesor or just create the array as I can remember which was one pair
from each controller. i.e /dev/sda3 /dev/sde3 ...?