From: Lee Jones <lee.jones@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>,
linux-kernel@vger.kernel.org,
Karl Komierowski <karl.komierowski@stericsson.com>,
Arun Murthy <arun.murthy@stericsson.com>
Subject: Re: [PATCH 1/3] power/ab8500_charger: harden platform data check
Date: Sat, 28 Apr 2012 17:38:13 +0100 [thread overview]
Message-ID: <4F9C1CF5.3050706@linaro.org> (raw)
In-Reply-To: <CACRpkdaM=OecD=M_J9X9shYKQkWO03mhb2BFxCWOeocr8_m=DQ@mail.gmail.com>
Find my version of the 3 patches below.
These also clean up some ugliness and brings the variable initialisation
formatting more into line with other drivers. If you like them I can
officially send them to the MLs as patches.
Your call of course.
On 28/04/12 13:59, Linus Walleij wrote:
> On Fri, Apr 13, 2012 at 10:15 AM, Linus Walleij
> <linus.walleij@stericsson.com> wrote:
>
>> From: Linus Walleij<linus.walleij@linaro.org>
>>
>> If no platform data at all is supplied the driver crashes,
>> extend the checks to be more careful so we can compile in the
>> driver and boot also without platform data present.
>>
>> Cc: Arun Murthy<arun.murthy@stericsson.com>
>> Signed-off-by: Linus Walleij<linus.walleij@linaro.org>
>
> Anton have you picked these three patches for the -rc:s?
>
> It seems Lee Jones is facing the problems so would be nice to
> have this upstream.
>
> Yours,
> Linus Walleij
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index d8bb993..a2ebcb4 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -964,10 +964,15 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
int irq, i, ret = 0;
u8 val;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_btemp *di;
+
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
- struct ab8500_btemp *di =
- kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
+ di = kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -977,7 +982,6 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get btemp specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->btemp;
if (!di->pdata) {
dev_err(di->dev, "no btemp platform data supplied\n");
##############################################################################
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index e2b4acc..a4e37a8 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -2534,10 +2534,15 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
int irq, i, charger_status, ret = 0;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_charger *di;
- struct ab8500_charger *di =
- kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ di = kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -2550,7 +2555,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
spin_lock_init(&di->usb_state.usb_lock);
/* get charger specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->charger;
if (!di->pdata) {
##############################################################################
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index c22f2f0..d88bc47 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -2446,10 +2446,15 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
{
int i, irq;
int ret = 0;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_fg *di;
+
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
- struct ab8500_fg *di =
- kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL);
+ di = kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -2461,7 +2466,6 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get fg specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->fg;
if (!di->pdata) {
dev_err(di->dev, "no fg platform data supplied\n");
--
1.7.9.1
next prev parent reply other threads:[~2012-04-28 16:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-13 8:15 [PATCH 1/3] power/ab8500_charger: harden platform data check Linus Walleij
2012-04-13 8:42 ` Arun MURTHY
2012-05-05 12:06 ` Anton Vorontsov
2012-04-28 12:59 ` Linus Walleij
2012-04-28 16:38 ` Lee Jones [this message]
2012-05-05 12:08 ` Anton Vorontsov
[not found] ` <CAF2Aj3hy3KOsH3aiZ0UpuERSwOoqFdYQ4su-hEVcU-qp8r5d9A@mail.gmail.com>
2012-05-05 21:55 ` Anton Vorontsov
2012-05-06 7:25 ` Lee Jones
2012-05-22 11:34 ` Lee Jones
2012-05-22 11:56 ` Anton Vorontsov
2012-05-22 12:03 ` Lee Jones
2012-05-22 13:22 ` Anton Vorontsov
2012-05-23 19:00 ` Linus Walleij
2012-05-02 11:31 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F9C1CF5.3050706@linaro.org \
--to=lee.jones@linaro.org \
--cc=anton.vorontsov@linaro.org \
--cc=arun.murthy@stericsson.com \
--cc=karl.komierowski@stericsson.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.