[    0.000000] Linux version 3.4.0-rc4 (root@node204) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 Sat Apr 28 04:04:13 CEST 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
[    0.000000]  BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: System Manufacturer System Name/MED 2001, BIOS ASUS MED 2001 ACPI BIOS Revision 1007 02/12/2001
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fffc max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 0FC000000 mask FFE000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-000000001fffc000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001fffc000 page 4k
[    0.000000] kernel direct mapping tables up to 1fffc000 @ 19fb000-1a00000
[    0.000000] ACPI: RSDP 000f61b0 00014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 1fffc000 0002C (v01 ASUS   MED_2001 30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 1fffc080 00074 (v01 ASUS   MED_2001 30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 1fffc100 02649 (v01   ASUS MED_2001 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 1ffff000 00040
[    0.000000] ACPI: BOOT 1fffc040 00028 (v01 ASUS   MED_2001 30303031 MSFT 31313031)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fffc000
[    0.000000]   low ram: 0 - 1fffc000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fffc
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fffc
[    0.000000] On node 0 totalpages: 130955
[    0.000000] free_area_init_node: node 0, pgdat c13f3420, node_mem_map dfbfb200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125980 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129931
[    0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.4.0-rc4 root=/dev/sda3 ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 514592k/524272k available (2995k kernel code, 9228k reserved, 1067k data, 308k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe4000 - 0xfffff000   ( 108 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xe07fc000 - 0xffbfe000   ( 500 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfffc000   ( 511 MB)
[    0.000000]       .init : 0xc13f8000 - 0xc1445000   ( 308 kB)
[    0.000000]       .data : 0xc12ecde3 - 0xc13f7dc0   (1067 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12ecde3   (2995 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=df406000 soft=df408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 997.417 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.83 BogoMIPS (lpj=3989668)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004094] Security Framework initialized
[    0.004132] Mount-cache hash table entries: 512
[    0.004561] mce: CPU supports 5 MCE banks
[    0.004589] CPU: Intel Pentium III (Coppermine) stepping 06
[    0.004626] ACPI: Core revision 20120320
[    0.009540] ACPI: setting ELCR to 0200 (from 8800)
[    0.009859] Performance Events: 
[    0.009867] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.009872] no hardware sampling interrupt available.
[    0.009878] p6 PMU driver.
[    0.009886] ... version:                0
[    0.009890] ... bit width:              32
[    0.009894] ... generic registers:      2
[    0.009899] ... value mask:             00000000ffffffff
[    0.009904] ... max period:             000000007fffffff
[    0.009908] ... fixed-purpose events:   0
[    0.009913] ... event mask:             0000000000000003
[    0.010302] devtmpfs: initialized
[    0.010661] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[    0.010860] NET: Registered protocol family 16
[    0.011077] ACPI: bus type pci registered
[    0.012313] PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
[    0.012319] PCI: Using configuration type 1 for base access
[    0.013539] bio: create slab <bio-0> at 0
[    0.013691] ACPI: Added _OSI(Module Device)
[    0.013699] ACPI: Added _OSI(Processor Device)
[    0.013705] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.013711] ACPI: Added _OSI(Processor Aggregator Device)
[    0.014419] ACPI: EC: Look up EC in DSDT
[    0.017554] ACPI: Interpreter enabled
[    0.017584] ACPI: (supports S0 S1 S4 S5)
[    0.017637] ACPI: Using PIC for interrupt routing
[    0.027040] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.027226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.027503] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.027512] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.027520] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.027528] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.027536] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
[    0.027543] PCI: root bus 00: using default resources
[    0.027625] PCI host bridge to bus 0000:00
[    0.027633] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.027641] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.027668] pci 0000:00:00.0: [1106:0691] type 00 class 0x060000
[    0.027691] pci 0000:00:00.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[    0.027755] pci 0000:00:01.0: [1106:8598] type 01 class 0x060400
[    0.027792] pci 0000:00:01.0: supports D1
[    0.027812] pci 0000:00:04.0: [1106:0686] type 00 class 0x060100
[    0.027883] pci 0000:00:04.1: [1106:0571] type 00 class 0x01018a
[    0.027925] pci 0000:00:04.1: reg 20: [io  0xd800-0xd80f]
[    0.027973] pci 0000:00:04.2: [1106:3038] type 00 class 0x0c0300
[    0.028043] pci 0000:00:04.2: reg 20: [io  0xd400-0xd41f]
[    0.028092] pci 0000:00:04.4: [1106:3057] type 00 class 0x060000
[    0.028137] pci 0000:00:04.4: quirk: [io  0xe400-0xe4ff] claimed by vt82c586 ACPI
[    0.028147] pci 0000:00:04.4: quirk: [io  0xe800-0xe80f] claimed by vt82c686 SMB
[    0.028183] pci 0000:00:05.0: [1274:5880] type 00 class 0x040100
[    0.028201] pci 0000:00:05.0: reg 10: [io  0xb800-0xb83f]
[    0.028253] pci 0000:00:05.0: supports D1 D2
[    0.028281] pci 0000:00:0b.0: [11ab:2a02] type 00 class 0x020000
[    0.028302] pci 0000:00:0b.0: reg 10: [mem 0xed800000-0xed80ffff]
[    0.028315] pci 0000:00:0b.0: reg 14: [mem 0xed000000-0xed00ffff]
[    0.028426] pci 0000:01:00.0: [10de:018b] type 00 class 0x030000
[    0.028445] pci 0000:01:00.0: reg 10: [mem 0xee000000-0xeeffffff]
[    0.028457] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.028488] pci 0000:01:00.0: reg 30: [mem 0xeffe0000-0xefffffff pref]
[    0.028538] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.028549] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xefefffff]
[    0.028558] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xfbffffff pref]
[    0.028571] pci_bus 0000:00: on NUMA node 0
[    0.028581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.028897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.029017]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.059147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.059280] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.059412] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.059541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.059775] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.059781] vgaarb: loaded
[    0.059786] vgaarb: bridge control possible 0000:01:00.0
[    0.060074] SCSI subsystem initialized
[    0.060210] libata version 3.00 loaded.
[    0.060278] PCI: Using ACPI for IRQ routing
[    0.060289] PCI: pci_cache_line_size set to 32 bytes
[    0.060347] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.060354] reserve RAM buffer: 000000001fffc000 - 000000001fffffff 
[    0.060656] Switching to clocksource pit
[    0.060775] pnp: PnP ACPI init
[    0.060799] ACPI: bus type pnp registered
[    0.061068] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.061075] pnp 00:00: [mem 0x000f0000-0x000fffff]
[    0.061082] pnp 00:00: [mem 0x00100000-0x1fffffff]
[    0.061088] pnp 00:00: [mem 0xfffe0000-0xffffffff]
[    0.061176] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.061186] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.061195] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[    0.061203] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[    0.061214] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.061551] pnp 00:01: [bus 00-ff]
[    0.061559] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.061566] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.061572] pnp 00:01: [io  0x0d00-0xffff window]
[    0.061579] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.061585] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[    0.061592] pnp 00:01: [mem 0x20000000-0xffffffff window]
[    0.061675] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.061773] pnp 00:02: [io  0x0010-0x001f]
[    0.061780] pnp 00:02: [io  0x0022-0x002d]
[    0.061786] pnp 00:02: [io  0x0030-0x003f]
[    0.061791] pnp 00:02: [io  0x0044-0x005f]
[    0.061797] pnp 00:02: [io  0x0062-0x0063]
[    0.061803] pnp 00:02: [io  0x0065-0x006f]
[    0.061808] pnp 00:02: [io  0x0074-0x007f]
[    0.061814] pnp 00:02: [io  0x0091-0x0093]
[    0.061819] pnp 00:02: [io  0x00a2-0x00bf]
[    0.061825] pnp 00:02: [io  0x00e0-0x00ef]
[    0.061831] pnp 00:02: [io  0x03f0-0x03f1]
[    0.061836] pnp 00:02: [io  0x04d0-0x04d1]
[    0.061915] system 00:02: [io  0x03f0-0x03f1] has been reserved
[    0.061923] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.061932] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.061983] pnp 00:03: [io  0xe400-0xe47f]
[    0.061990] pnp 00:03: [io  0xe800-0xe80f]
[    0.062008] pnp 00:03: disabling [io  0xe400-0xe47f] because it overlaps 0000:00:04.4 BAR 7 [io  0xe400-0xe4ff]
[    0.062069] system 00:03: [io  0xe800-0xe80f] has been reserved
[    0.062078] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.062204] pnp 00:04: [dma 4]
[    0.062210] pnp 00:04: [io  0x0000-0x000f]
[    0.062216] pnp 00:04: [io  0x0080-0x0090]
[    0.062222] pnp 00:04: [io  0x0094-0x009f]
[    0.062227] pnp 00:04: [io  0x00c0-0x00df]
[    0.062282] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.062314] pnp 00:05: [io  0x0070-0x0073]
[    0.062324] pnp 00:05: [irq 8]
[    0.062397] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.062424] pnp 00:06: [io  0x0061]
[    0.062479] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.062511] pnp 00:07: [io  0x00f0-0x00ff]
[    0.062518] pnp 00:07: [irq 13]
[    0.062574] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.062859] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
[    0.063504] pnp 00:09: [io  0x03f8-0x03ff]
[    0.063512] pnp 00:09: [irq 4]
[    0.063656] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.063979] pnp 00:0a: [io  0x0060]
[    0.063979] pnp 00:0a: [io  0x0064]
[    0.063979] pnp 00:0a: [irq 1]
[    0.063979] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.063979] pnp 00:0b: [irq 12]
[    0.063979] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.063979] pnp: PnP ACPI: found 12 devices
[    0.063979] ACPI: ACPI bus type pnp unregistered
[    0.063979] PnPBIOS: Disabled by ACPI PNP
[    0.101796] Switching to clocksource acpi_pm
[    0.101875] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.101891] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xefefffff]
[    0.101900] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xfbffffff pref]
[    0.101930] pci 0000:00:01.0: setting latency timer to 64
[    0.101940] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.101947] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.101955] pci_bus 0000:01: resource 1 [mem 0xee000000-0xefefffff]
[    0.101962] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xfbffffff pref]
[    0.102136] NET: Registered protocol family 2
[    0.102314] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.102643] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.103116] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.103501] TCP: Hash tables configured (established 16384 bind 16384)
[    0.103513] TCP: reno registered
[    0.103529] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.103558] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.103830] NET: Registered protocol family 1
[    0.103897] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.104756] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
[    0.104766] PCI: setting IRQ 15 as level-triggered
[    0.104823] pci 0000:01:00.0: Boot video device
[    0.104830] PCI: CLS 32 bytes, default 32
[    0.105042] Simple Boot Flag at 0x3a set to 0x1
[    0.106286] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.106571] VFS: Disk quotas dquot_6.5.2
[    0.106618] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.106795] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.107120] msgmni has been set to 1005
[    0.107432] alg: No test for stdrng (krng)
[    0.107500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.107510] io scheduler noop registered
[    0.107515] io scheduler deadline registered
[    0.107541] io scheduler cfq registered (default)
[    0.107665] intel_idle: does not run on family 6 model 8
[    0.107704] isapnp: Scanning for PnP cards...
[    0.461697] isapnp: No Plug & Play device found
[    0.461802] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.482568] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.503795] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.504157] Linux agpgart interface v0.103
[    0.504374] agpgart: Detected VIA Apollo Pro 133 chipset
[    0.506762] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xfc000000
[    0.507007] pata_via 0000:00:04.1: version 0.3.4
[    0.507719] scsi0 : pata_via
[    0.507896] scsi1 : pata_via
[    0.507977] ata2: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
[    0.507985] ata3: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
[    0.508258] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.508793] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.508807] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.509098] mousedev: PS/2 mouse device common for all mice
[    0.509185] rtc_cmos 00:05: RTC can wake from S4
[    0.509459] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.509497] rtc0: alarms up to one year, 242 bytes nvram
[    0.509523] cpuidle: using governor ladder
[    0.509528] cpuidle: using governor menu
[    0.509868] TCP: cubic registered
[    0.509876] NET: Registered protocol family 17
[    0.509901] Registering the dns_resolver key type
[    0.510168] registered taskstats version 1
[    0.510597] rtc_cmos 00:05: setting system clock to 2012-04-28 02:22:03 UTC (1335579723)
[    0.534777] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.672297] ata2.00: ATA-5: MAXTOR 6L080L4, A93.0500, max UDMA/133
[    0.672306] ata2.00: 156355584 sectors, multi 16: LBA 
[    0.672319] ata2.00: limited to UDMA/33 due to 40-wire cable
[    0.688216] ata2.00: configured for UDMA/33
[    0.688499] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR 6L080L4   A93. PQ: 0 ANSI: 5
[    0.688926] ata3: port disabled--ignoring
[    0.689006] sd 0:0:0:0: [sda] 156355584 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.689118] sd 0:0:0:0: [sda] Write Protect is off
[    0.689126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.689175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.697611]  sda: sda1 sda2 sda3
[    0.698211] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.738098] XFS (sda3): Mounting Filesystem
[    0.993290] XFS (sda3): Ending clean mount
[    0.993348] VFS: Mounted root (xfs filesystem) readonly on device 8:3.
[    0.993448] Freeing unused kernel memory: 308k freed
[    1.104074] Refined TSC clocksource calibration: 997.453 MHz.
[    1.104098] Switching to clocksource tsc
[    3.887974] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    3.887998] ACPI: Power Button [PWRB]
[    3.888291] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.888302] ACPI: Power Button [PWRF]
[    3.931590] Marking TSC unstable due to TSC halts in idle
[    3.931611] ACPI: acpi_idle registered with cpuidle
[    3.945403] Switching to clocksource acpi_pm
[    4.112001] parport_pc: VIA 686A/8231 detected
[    4.112073] parport_pc: probing current configuration
[    4.112097] parport_pc: Current parallel port base: 0x0
[    4.112104] parport_pc: VIA parallel port disabled in BIOS
[    4.214339] cfg80211: Calling CRDA to update world regulatory domain
[    4.283541] usbcore: registered new interface driver usbfs
[    4.284160] usbcore: registered new interface driver hub
[    4.286140] [drm] Initialized drm 1.1.0 20060810
[    4.286570] usbcore: registered new device driver usb
[    4.384197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.393500] uhci_hcd: USB Universal Host Controller Interface driver
[    4.394405] uhci_hcd 0000:00:04.2: UHCI Host Controller
[    4.394464] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[    4.394510] uhci_hcd 0000:00:04.2: irq 15, io base 0x0000d400
[    4.394617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.394625] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.394632] usb usb1: Product: UHCI Host Controller
[    4.394638] usb usb1: Manufacturer: Linux 3.4.0-rc4 uhci_hcd
[    4.394643] usb usb1: SerialNumber: 0000:00:04.2
[    4.395209] hub 1-0:1.0: USB hub found
[    4.395225] hub 1-0:1.0: 2 ports detected
[    4.465835] wmi: Mapper loaded
[    4.505699] via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
[    4.698933] Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.13
[    4.698963] mwl8k 0000:00:0b.0: enabling device (0004 -> 0006)
[    4.699604] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    4.699613] PCI: setting IRQ 11 as level-triggered
[    4.837430] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[    5.213942] VGA switcheroo: detected Optimus DSM method \ handle
[    5.214641] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    5.216503] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018b00a2)
[    5.218363] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    5.256564] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    5.256576] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    5.256900] [drm] nouveau 0000:01:00.0: BMP BIOS found
[    5.256906] [drm] nouveau 0000:01:00.0: BMP version 5.21
[    5.256916] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.02
[    5.259303] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    5.259317] [drm] nouveau 0000:01:00.0: DCB version 2.1
[    5.259327] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000310 000088b8
[    5.259335] [drm] nouveau 0000:01:00.0: DCB outp 01: 01010202 00000000
[    5.259342] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010300 000088b8
[    5.259349] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003
[    5.259844] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[    5.259855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBA3E
[    5.259915] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xBDD4
[    5.274061] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xBB59
[    5.289184] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xC293
[    5.289199] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xBD30
[    5.353018] [TTM] Zone  kernel: Available graphics memory: 257450 kiB
[    5.353024] [TTM] Initializing pool allocator
[    5.353063] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[    5.353375] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[    5.353410] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[    5.353451] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[    5.353460] [drm] nouveau 0000:01:00.0: 32 MiB GART (aperture)
[    5.353572] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    5.402412] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.402423] [drm] No driver support for vblank timestamp query.
[    5.403326] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[    5.403335] [drm] nouveau 0000:01:00.0: 0:
[    5.403343] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 405MHz
[    5.407308] [drm] nouveau 0000:01:00.0: 0xCF08: Parsing digital output script table
[    5.428071] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[    5.428084] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[    5.428092] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[    5.428101] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[    5.527626] cfg80211: World regulatory domain updated:
[    5.527641] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.527650] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.527658] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.527665] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.527673] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.527680] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.556054] [drm] nouveau 0000:01:00.0: Load detected on output B
[    5.556953] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo df731400
[    5.557338] fbcon: nouveaufb (fb0) is primary device
[    6.218845] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[    6.218856] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B
[    6.232104] [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10]
[    6.232116] fbcon_init: detected unhandled fb_set_par error, error code -22
[    6.232867] [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10]
[    6.234309] Console: switching to colour frame buffer device 90x36
[    6.234345] [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10]
[    6.235804] fb0: nouveaufb frame buffer device
[    6.235810] drm: registered panic notifier
[    6.235825] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    6.347738] ieee80211 phy0: 88w8361p v4, 00173f3bdde3, STA firmware 2.1.4.25
[    8.376212] Adding 499964k swap on /dev/sda2.  Priority:-1 extents:1 across:499964k 
[    8.780389] loop: module loaded
[   12.376249] NET: Registered protocol family 10
[   12.376892] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.180811] wlan0: authenticate with 00:1c:f0:fb:67:68
[   13.188951] wlan0: send auth to 00:1c:f0:fb:67:68 (try 1/3)
[   13.192012] wlan0: authenticated
[   13.196051] wlan0: associate with 00:1c:f0:fb:67:68 (try 1/3)
[   13.198995] wlan0: RX AssocResp from 00:1c:f0:fb:67:68 (capab=0x431 status=0 aid=1)
[   13.199003] wlan0: associated
[   13.206529] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.861461] RPC: Registered named UNIX socket transport module.
[   18.861475] RPC: Registered udp transport module.
[   18.861479] RPC: Registered tcp transport module.
[   18.861484] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.901267] FS-Cache: Loaded
[   18.958512] NFS: Registering the id_resolver key type
[   18.959646] FS-Cache: Netfs 'nfs' registered for caching
[   18.992177] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   19.409667] fuse init (API version 7.18)
[   19.724787] [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10]
[   23.376061] wlan0: no IPv6 routers present
[   24.244235] [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:10]
[   25.350623] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   26.021188] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   26.021198] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B
[   26.061012] lp: driver loaded but no devices found
[  637.597556] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[71967.977191] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71967.981684] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71968.163002] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71970.055950] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71970.184194] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71972.081801] ieee80211 phy0: not enabling sniffer mode because STA interface is active
[71972.369009] ieee80211 phy0: not enabling sniffer mode because STA interface is active
