Re: Determining if an ext4 fs uses the whole partition

[Eric Sandeen <sandeen@redhat.com>]

On 4/30/12 12:19 PM, Daniel Drake wrote:
> Hi,
> 
> OLPC has started using ext4 online resizing to grow our filesystems to
> use the whole SD card on first boot - something we never did before.
> Working very nicely, thanks!
> 
> I'm trying to simplify/improve the scripts involved in doing this.
> 
> How can I programatically check if an ext4 fs already fills its
> partition, or if it has room to grow?
> 
> 
> The numbers produced by dumpe2fs (e.g. block count) or "df" don't seem
> to exactly line up with the sizes produced by fdisk.

Do you have an example of this?

For starters, use fdisk -u to get 512-byte sector units,
otherwise it's just inscrutable CHS magic.

i.e.:

# fdisk -lu /dev/sda2

Disk /dev/sda2: 526 MB, 526417920 bytes
255 heads, 63 sectors/track, 64 cylinders, total 1028160 sectors
Units = sectors of 1 * 512 = 512 bytes

so 1028160 512-byte sectors.

# dumpe2fs -h /dev/sda2 | grep "Block count\|Block size"
dumpe2fs 1.42.2 (27-Mar-2012)
Block count:              514080
Block size:               1024

so 514080 1k blocks, or 1028160 512-byte sectors, so bingo, it's full.

Of course you can't use an odd sector hanging off the end, so you'd
need to do a little rounding down to the nearest fs block size.
Otherwise, it should be straightforward.

Or, FWIW, it's harmless to invoke resize2fs if the fs already fills the
partition; it should just exit with a no-op.

> One easy solution, if possible, would be to find out the number of the
> last sector used by the filesystem. I could then very easily compare
> this to the "end" information found in sysfs for the partition. Then I
> can make the decision on whether to grow or not.

dumpe2fs should certainly be able to tell you.  Mounting the fs, and
doing statfs would, as well (f_blocks).  There should also be libext2fs
functions you could use if you want to do it in C...

-Eric