Re: [PATCH V1] RFC - Proposed IIO Documentation patch to add CCT and RGBC data

[Jonathan Cameron <jic23@cam.ac.uk>]

Added cc's

Jon, remember to wrap emails at 80 chars please!
> Request for Comments -
>
> Documentation patch to add Correlated Color Temperature (CCT) and RGBC (red/green/blue/clear) data.
>
> The addition of CCT and RGBC is afforded by utilizing a 'real channel' type of IIO_CCT, and 4 modifiers of IIO_MOD_LIGHT_CLEAR, IIO_MOD_LIGHT_RED, IIO_MOD_LIGHT_GREEN, and IIO_MOD_LIGHT_BLUE, found in types.h.
> A trivial addition to industrialio-core.c is required.
>
> in_cct0_input will return typically return the color temperature expressed in kelvins.
>
> IIO_MODIFIERs are respective of the associated light frequencies for each of the channels.
>
>
>
>
>
>
> Signed-off-by: Jon Brenner<jbrenner@taosinc.com>
> ---
>   .../staging/iio/Documentation/sysfs-bus-iio-light  |   46 ++++++++++++++++++++
>   1 files changed, 46 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> index 715c74d..bd42baf 100644
> --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> @@ -34,6 +34,15 @@ Description:
>   		it comes back in SI units, it should also include _input else it
>   		should include _raw to signify it is not in SI units.
>
> +What:		/sys/bus/iio/devices/device[n]/in_cct0[_input|_raw]
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This should return the correlated color temperature from the
> +		light sensor. If it comes back in SI units, it should also
> +		include _input else it should include _raw to signify it is not
> +		in SI units.
> +
>   What:		/sys/.../device[n]/proximity_on_chip_ambient_infrared_supression
>   KernelVersion:	2.6.37
>   Contact:	linux-iio@vger.kernel.org
> @@ -82,3 +91,40 @@ Contact:	linux-iio@vger.kernel.org
>   Description:
>   		This property gets/sets the table of coefficients
>   		used in calculating illuminance in lux.
> +
> +What:		/sys/bus/iio/devices/device[n]/in_intensity_clear[_input|_raw]
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This property is supported by sensors that have a RGBC
> +		sensing mode. This value should be the output from a reading
> +		and if expressed in SI units, should include _input. If this
> +		value is not in SI units, then it should include _raw.
> +
> +What:		/sys/bus/iio/devices/device[n]/in_intensity_red[_input|_raw]
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This property is supported by sensors that have a RGBC
> +		sensing mode. This value should be the output from a reading
> +		and if expressed in SI units, should include _input. If this
> +		value is not in SI units, then it should include _raw.
> +
> +What:		/sys/bus/iio/devices/device[n]/in_intensity_green[_input|_raw]
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This property is supported by sensors that have a RGBC
> +		sensing mode. This value should be the output from a reading
> +		and if expressed in SI units, should include _input. If this
> +		value is not in SI units, then it should include _raw.
> +
> +What:		/sys/bus/iio/devices/device[n]/in_intensity_blue[_input|_raw]
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This property is supported by sensors that have a RGBC
> +		sensing mode. This value should be the output from a reading
> +		and if expressed in SI units, should include _input. If this
> +		value is not in SI units, then it should include _raw.
> +
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html