From: "Niccolò Belli" <darkbasic@linuxsystems.it>
To: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org
Subject: Re: sky2 still badly broken
Date: Thu, 03 May 2012 21:26:52 +0200 [thread overview]
Message-ID: <4FA2DBFC.5010505@linuxsystems.it> (raw)
In-Reply-To: <20120503111536.269490e3@nehalam.linuxnetplumber.net>
Il 03/05/2012 20:15, Stephen Hemminger ha scritto:
> Maybe ethtool registers have some info?
>
> # ethtool -S eth0
After:
64 bytes from 8.8.8.8: icmp_req=592 ttl=47 time=61.0 ms
64 bytes from 8.8.8.8: icmp_req=593 ttl=47 time=64.9 ms
64 bytes from 8.8.8.8: icmp_req=594 ttl=47 time=61.8 ms
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
[...]
I get:
laptop ~ # ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pg
Wake-on: g
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err
tx_err
Link detected: yes
laptop ~ # ethtool -S eth0
NIC statistics:
tx_bytes: 118170
rx_bytes: 891033
tx_broadcast: 36
rx_broadcast: 346
tx_multicast: 4
rx_multicast: 332
tx_unicast: 1131
rx_unicast: 1235
tx_mac_pause: 0
rx_mac_pause: 0
collisions: 0
late_collision: 0
aborted: 0
single_collisions: 0
multi_collisions: 0
rx_short: 0
rx_runt: 0
rx_64_byte_packets: 344
rx_65_to_127_byte_packets: 654
rx_128_to_255_byte_packets: 362
rx_256_to_511_byte_packets: 50
rx_512_to_1023_byte_packets: 11
rx_1024_to_1518_byte_packets: 492
rx_1518_to_max_byte_packets: 0
rx_too_long: 0
rx_fifo_overflow: 0
rx_jabber: 0
rx_fcs_error: 0
tx_64_byte_packets: 45
tx_65_to_127_byte_packets: 1074
tx_128_to_255_byte_packets: 0
tx_256_to_511_byte_packets: 52
tx_512_to_1023_byte_packets: 0
tx_1024_to_1518_byte_packets: 0
tx_1519_to_max_byte_packets: 0
tx_fifo_underrun: 0
> And if you enable the debugfs option there is more info
> hidden there.
>
> # mount -t debugfs debugfs /sys/kernel/debug
> # cat /sys/kernel/debug/sky2/eth0
There is no sky2 directory, maybe I don't have enough debug options in
my kernel config.
Niccolò
next prev parent reply other threads:[~2012-05-03 19:25 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-27 20:15 sky2 still badly broken Niccolò Belli
2012-04-27 20:41 ` [RFT] sky2: fix status length check on older chips Stephen Hemminger
2012-04-27 20:48 ` David Miller
2012-04-27 20:55 ` Stephen Hemminger
2012-04-27 23:05 ` Niccolò Belli
2012-04-28 2:46 ` Stephen Hemminger
2012-04-28 10:25 ` Niccolò Belli
2012-04-30 16:19 ` Stephen Hemminger
2012-04-30 18:23 ` Niccolò Belli
2012-04-28 3:03 ` [PATCH] sky2: fix receive length error in mixed non-VLAN/VLAN traffic Stephen Hemminger
2012-04-28 3:05 ` Stephen Hemminger
2012-09-17 14:20 ` [RFT] sky2: fix status length check on older chips Ivan Minev
2012-04-30 19:25 ` sky2 still badly broken Stephen Hemminger
2012-04-30 23:50 ` Niccolò Belli
2012-05-02 15:12 ` Niccolò Belli
2012-05-02 18:56 ` Stephen Hemminger
2012-05-03 9:40 ` Niccolò Belli
2012-05-03 15:23 ` Stephen Hemminger
2012-05-03 18:06 ` Niccolò Belli
2012-05-03 18:15 ` Stephen Hemminger
2012-05-03 19:26 ` Niccolò Belli [this message]
2012-05-03 19:36 ` Niccolò Belli
2012-05-03 21:25 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA2DBFC.5010505@linuxsystems.it \
--to=darkbasic@linuxsystems.it \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.