From: Stefan Bader <stefan.bader@canonical.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>,
"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
Jan Beulich <jbeulich@suse.com>,
Boris Ostrovsky <boris.ostrovsky@amd.com>
Subject: Re: Workings/effectiveness of the xen-acpi-processor driver
Date: Fri, 04 May 2012 10:00:32 +0200 [thread overview]
Message-ID: <4FA38CA0.3020601@canonical.com> (raw)
In-Reply-To: <20120503170858.GC9992@phenom.dumpdata.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 5430 bytes --]
On 03.05.2012 19:08, Konrad Rzeszutek Wilk wrote:
>>> Hmmm, so xen_apic_read is still correct...
>>>
>>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>> [ 0.000000] xxx xen_apic_read(20)
>>> [ 0.000000] xxx xen_apic_read -> 10
>>> [ 0.000000] boot_cpu_physical_apicid = 0
>>> [ 0.000000] xxx xen_apic_read(30)
>>> [ 0.000000] +- apic version = 10
>>>
>>> there seems to be a slightly strange tweak (at least for me) in read_apic_id...
>>>
>>> static inline unsigned int read_apic_id(void)
>>> {
>>> unsigned int reg;
>>>
>>> reg = apic_read(APIC_ID); // calls apic->read(reg)
>>>
>>> return apic->get_apic_id(reg);
>>
>> Duh!! Let me spin out a new patch that will do this.
>
> Meaning bit-shift it. We ended up doing 10 >> 24 (get_apic_id does that)
> which results in zero. So lets be a bit more cautious and over-write
> the get_apic_id and set_apic_id and as well do the proper bit-shifting.
>
I can confirm that with this patch applied I can load the xen-acpi-processor
driver and see P-states changing in xenpm. No BIOS bug messages.
Also tested on the i7 and it does still work. I am attaching the dmesg output of
both runs. On the i7 the xen apic functions are called in two places and for
cpu#0 only. On AMD, I see additional call later and for all cpus while enabling
them. apic->read bails out, but apic->get_apic_id returns 0 (though I could see
no immediate problem from that). Maybe that info is helpful for the next stage.
-Stefan
> commit 4bb450ea9dca1b8d845f1b53ab6476615a32badf
> Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Date: Wed May 2 15:04:51 2012 -0400
>
> xen/apic: Return the APIC ID (and version) for CPU 0.
>
> On x86_64 on AMD machines where the first APIC_ID is not zero, we get:
>
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
> BIOS bug: APIC version is 0 for CPU 1/0x10, fixing up to 0x10
> BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version 10
>
> which means that when the ACPI processor driver loads and
> tries to parse the _Pxx states it fails to do as, as it
> ends up calling acpi_get_cpuid which does this:
>
> for_each_possible_cpu(i) {
> if (cpu_physical_id(i) == apic_id)
> return i;
> }
>
> And the bootup CPU, has not been found so it fails and returns -1
> for the first CPU - which then subsequently in the loop that
> "acpi_processor_get_info" does results in returning an error, which
> means that "acpi_processor_add" failing and per_cpu(processor)
> is never set (and is NULL).
>
> That means that when xen-acpi-processor tries to load (much much
> later on) and parse the P-states it gets -ENODEV from
> acpi_processor_register_performance() (which tries to read
> the per_cpu(processor)) and fails to parse the data.
>
> Reported-by: Stefan Bader <stefan.bader@canonical.com>
> Suggested-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
> [v2: Bit-shift APIC ID by 24 bits]
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
>
> diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> index a8f8844..63d6c22 100644
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -53,6 +53,9 @@
> #include <asm/processor.h>
> #include <asm/proto.h>
> #include <asm/msr-index.h>
> +#ifdef CONFIG_NUMA
> +#include <asm/numa.h>
> +#endif
> #include <asm/traps.h>
> #include <asm/setup.h>
> #include <asm/desc.h>
> @@ -809,9 +812,40 @@ static void xen_io_delay(void)
> }
>
> #ifdef CONFIG_X86_LOCAL_APIC
> +static unsigned long xen_set_apic_id(unsigned int x)
> +{
> + WARN_ON(1);
> + return x;
> +}
> +static unsigned int xen_get_apic_id(unsigned long x)
> +{
> + return (((x)>>24) & 0xFFu);
> +}
> static u32 xen_apic_read(u32 reg)
> {
> - return 0;
> + struct xen_platform_op op = {
> + .cmd = XENPF_get_cpuinfo,
> + .interface_version = XENPF_INTERFACE_VERSION,
> + .u.pcpu_info.xen_cpuid = 0,
> + };
> + int ret = 0;
> +
> + /* Shouldn't need this as APIC is turned off for PV, and we only
> + * get called on the bootup processor. But just in case. */
> + if (!xen_initial_domain() || smp_processor_id())
> + return 0;
> +
> + if (reg == APIC_LVR)
> + return 0x10;
> +
> + if (reg != APIC_ID)
> + return 0;
> +
> + ret = HYPERVISOR_dom0_op(&op);
> + if (ret)
> + return 0;
> +
> + return op.u.pcpu_info.apic_id << 24;
> }
>
> static void xen_apic_write(u32 reg, u32 val)
> @@ -849,6 +883,8 @@ static void set_xen_basic_apic_ops(void)
> apic->icr_write = xen_apic_icr_write;
> apic->wait_icr_idle = xen_apic_wait_icr_idle;
> apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle;
> + apic->set_apic_id = xen_set_apic_id;
> + apic->get_apic_id = xen_get_apic_id;
> }
>
> #endif
> @@ -1294,6 +1330,9 @@ asmlinkage void __init xen_start_kernel(void)
> */
> acpi_numa = -1;
> #endif
> +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
> + numa_off = 1;
> +#endif
>
> pgd = (pgd_t *)xen_start_info->pt_base;
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
[-- Attachment #1.1.2: dmesg.i7.txt --]
[-- Type: text/plain, Size: 75489 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38+xendbg8 SMP Thu May 3 17:40:06 UTC 2012 (Ubuntu 3.2.0-24.38+xendbg8-generic 3.2.16)
[ 0.000000] Command line: placeholder root=/dev/mapper/rootvg-magrathea ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Freeing 97-100 pfn range: 105 pages freed
[ 0.000000] 1-1 mapping on 97->100
[ 0.000000] 1-1 mapping on dfee0->100000
[ 0.000000] Released 105 pages of unused memory
[ 0.000000] Set 131465 page(s) to 1-1 mapping
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000000097000 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] Xen: 00000000dfee0000 - 00000000dfee1000 (ACPI NVS)
[ 0.000000] Xen: 00000000dfee1000 - 00000000dfef0000 (ACPI data)
[ 0.000000] Xen: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000180120000 (usable)
[ 0.000000] Xen: 0000000180120000 - 0000000220000000 (unusable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EX58-UD3R/EX58-UD3R, BIOS F11 03/11/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x180120 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5cc0] f5cc0
[ 0.000000] initial memory mapped : 0 - 047e7000
[ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 8fb000-1000000
[ 0.000000] xen: setting RW the range fd4000 - 1000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000180120000
[ 0.000000] 0100000000 - 0180120000 page 4k
[ 0.000000] kernel direct mapping tables up to 180120000 @ 1f3f7000-20000000
[ 0.000000] xen: setting RW the range 1f7fb000 - 20000000
[ 0.000000] RAMDISK: 02060000 - 047e7000
[ 0.000000] ACPI: RSDP 00000000000f7680 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee1180 04BA7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee5f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee5f80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee5fc0 00470 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee6430 00B72 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000dfee5d80 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee6fb0 02FE4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] xxx xen_apic_read(0x20) -> 0x0
[ 0.000000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.000000] xxx xen_apic_read(0x30) -> 0x10
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000180120000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000180120000
[ 0.000000] NODE_DATA [000000001fffb000 - 000000001fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00180120
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00180120
[ 0.000000] On node 0 totalpages: 1441671
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1758 pages reserved
[ 0.000000] DMA zone: 2153 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31
[ 0.000000] Normal zone: 8197 pages used for memmap
[ 0.000000] Normal zone: 516379 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] xxx xen_apic_read(0x20) -> 0x0
[ 0.000000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000
[ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fdeb000 s83072 r8192 d23424 u114688
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
[ 2.348911] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1415332
[ 2.348914] Policy zone: Normal
[ 2.348917] Kernel command line: placeholder root=/dev/mapper/rootvg-magrathea ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot
[ 2.349396] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.378521] Placing 64MB software IO TLB between ffff880015400000 - ffff880019400000
[ 2.378525] software IO TLB at phys 0x15400000 - 0x19400000
[ 2.379958] Memory: 294916k/6292608k available (6654k kernel code, 525924k absent, 5471768k reserved, 6550k data, 920k init)
[ 2.380035] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 2.380070] Hierarchical RCU implementation.
[ 2.380072] RCU dyntick-idle grace-period acceleration is enabled.
[ 2.380083] NR_IRQS:16640 nr_irqs:4096 16
[ 2.380142] xen: sci override: global_irq=9 trigger=0 polarity=0
[ 2.380145] xen: registering gsi 9 triggering 0 polarity 0
[ 2.380154] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 2.380159] xen: acpi sci 9
[ 2.380162] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 2.380166] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 2.380169] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 2.380173] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 2.380176] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 2.380179] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 2.380182] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 2.380186] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 2.380188] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 2.380190] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 2.380193] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 2.380197] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 2.380200] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 2.380204] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 2.380207] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 2.380210] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 2.382007] Console: colour VGA+ 80x25
[ 2.382011] console [hvc0] enabled, bootconsole disabled
[ 2.390775] allocated 47185920 bytes of page_cgroup
[ 2.390779] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 2.390818] Xen: using vcpuop timer interface
[ 2.390825] installing Xen timer for CPU 0
[ 2.390854] Detected 2664.850 MHz processor.
[ 2.390861] Calibrating delay loop (skipped), value calculated using timer frequency.. 5329.70 BogoMIPS (lpj=10659400)
[ 2.390866] pid_max: default: 32768 minimum: 301
[ 2.390896] Security Framework initialized
[ 2.390906] AppArmor: AppArmor initialized
[ 2.390908] Yama: becoming mindful.
[ 2.393465] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 2.395968] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.396755] Mount-cache hash table entries: 256
[ 2.396908] Initializing cgroup subsys cpuacct
[ 2.396914] Initializing cgroup subsys memory
[ 2.396926] Initializing cgroup subsys devices
[ 2.396929] Initializing cgroup subsys freezer
[ 2.396932] Initializing cgroup subsys blkio
[ 2.396943] Initializing cgroup subsys perf_event
[ 2.396999] CPU: Physical Processor ID: 0
[ 2.397001] CPU: Processor Core ID: 0
[ 2.399115] ACPI: Core revision 20110623
[ 2.408066] ftrace: allocating 27104 entries in 107 pages
[ 2.414834] cpu 0 spinlock event irq 273
[ 2.414887] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
[ 2.415004] NMI watchdog disabled (cpu0): hardware events not enabled
[ 2.415078] installing Xen timer for CPU 1
[ 2.415089] cpu 1 spinlock event irq 279
[ 2.415214] NMI watchdog disabled (cpu1): hardware events not enabled
[ 2.415291] installing Xen timer for CPU 2
[ 2.415302] cpu 2 spinlock event irq 285
[ 2.415386] NMI watchdog disabled (cpu2): hardware events not enabled
[ 2.415455] installing Xen timer for CPU 3
[ 2.415466] cpu 3 spinlock event irq 291
[ 2.415545] NMI watchdog disabled (cpu3): hardware events not enabled
[ 2.415617] installing Xen timer for CPU 4
[ 2.415627] cpu 4 spinlock event irq 297
[ 2.415712] NMI watchdog disabled (cpu4): hardware events not enabled
[ 2.415786] installing Xen timer for CPU 5
[ 2.415797] cpu 5 spinlock event irq 303
[ 2.415880] NMI watchdog disabled (cpu5): hardware events not enabled
[ 2.415950] installing Xen timer for CPU 6
[ 2.415960] cpu 6 spinlock event irq 309
[ 2.416047] NMI watchdog disabled (cpu6): hardware events not enabled
[ 2.416118] installing Xen timer for CPU 7
[ 2.416131] cpu 7 spinlock event irq 315
[ 2.416213] NMI watchdog disabled (cpu7): hardware events not enabled
[ 2.416234] Brought up 8 CPUs
[ 2.416605] devtmpfs: initialized
[ 2.417654] EVM: security.selinux
[ 2.417657] EVM: security.SMACK64
[ 2.417659] EVM: security.capability
[ 2.417704] PM: Registering ACPI NVS region at dfee0000 (4096 bytes)
[ 2.418293] Grant table initialized
[ 2.418336] print_constraints: dummy:
[ 2.418372] RTC time: 9:37:06, date: 05/04/12
[ 2.418401] NET: Registered protocol family 16
[ 2.418497] Trying to unpack rootfs image as initramfs...
[ 2.423099] ACPI: bus type pci registered
[ 2.423174] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 2.423178] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 2.440460] PCI: Using configuration type 1 for base access
[ 2.441457] bio: create slab <bio-0> at 0
[ 2.441567] ACPI: Added _OSI(Module Device)
[ 2.441570] ACPI: Added _OSI(Processor Device)
[ 2.441573] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.441576] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.443539] ACPI: EC: Look up EC in DSDT
[ 2.451390] ACPI Warning: Incorrect checksum in table [TAMG] - 0x0C, should be 0x0B (20110623/tbutils-314)
[ 2.454463] ACPI: Interpreter enabled
[ 2.454468] ACPI: (supports S0 S3 S4 S5)
[ 2.454494] ACPI: Using IOAPIC for interrupt routing
[ 2.458582] Freeing initrd memory: 40476k freed
[ 2.461357] ACPI: No dock devices found.
[ 2.461362] HEST: Table not found.
[ 2.461366] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.461499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 2.461744] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 2.461748] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 2.461751] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 2.461754] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 2.461758] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 2.461784] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[ 2.461890] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 2.461896] pci 0000:00:00.0: PME# disabled
[ 2.461939] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 2.462052] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.462058] pci 0000:00:01.0: PME# disabled
[ 2.462101] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 2.462214] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 2.462220] pci 0000:00:03.0: PME# disabled
[ 2.462266] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 2.462378] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 2.462384] pci 0000:00:07.0: PME# disabled
[ 2.462430] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
[ 2.462559] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
[ 2.462672] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
[ 2.462802] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
[ 2.462917] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 2.462939] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff]
[ 2.463037] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 2.463043] pci 0000:00:13.0: PME# disabled
[ 2.463078] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 2.463209] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 2.463342] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 2.463476] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
[ 2.463596] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 2.463672] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 2.463761] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 2.463836] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 2.463928] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 2.464000] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 2.464113] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 2.464148] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 2.464305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 2.464312] pci 0000:00:1a.7: PME# disabled
[ 2.464357] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 2.464384] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 2.464508] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.464515] pci 0000:00:1b.0: PME# disabled
[ 2.464549] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 2.464677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.464683] pci 0000:00:1c.0: PME# disabled
[ 2.464721] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[ 2.464849] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.464855] pci 0000:00:1c.1: PME# disabled
[ 2.464897] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 2.465026] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.465032] pci 0000:00:1c.4: PME# disabled
[ 2.465074] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 2.465149] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 2.465238] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 2.465313] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 2.465402] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 2.465477] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 2.465582] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 2.465617] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[ 2.465771] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 2.465779] pci 0000:00:1d.7: PME# disabled
[ 2.465815] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 2.465928] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 2.466059] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 2.466064] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 2.466147] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 2.466182] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 2.466196] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 2.466211] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 2.466225] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 2.466239] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f]
[ 2.466253] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
[ 2.466340] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.466346] pci 0000:00:1f.2: PME# disabled
[ 2.466375] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 2.466402] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[ 2.466441] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 2.466557] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.466656] pci 0000:02:00.0: [10de:05e1] type 0 class 0x000300
[ 2.466676] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 2.466696] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.466717] pci 0000:02:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[ 2.466730] pci 0000:02:00.0: reg 24: [io 0xef00-0xef7f]
[ 2.466744] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 2.472216] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 2.472227] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 2.472237] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 2.472251] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.472331] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 2.472414] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 2.472521] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 2.472649] pci 0000:05:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 2.472741] pci 0000:05:00.0: PME# supported from D3hot
[ 2.472749] pci 0000:05:00.0: PME# disabled
[ 2.472789] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 2.472824] pci 0000:05:00.1: reg 10: [io 0xdf00-0xdf07]
[ 2.472845] pci 0000:05:00.1: reg 14: [io 0xde00-0xde03]
[ 2.472864] pci 0000:05:00.1: reg 18: [io 0xdd00-0xdd07]
[ 2.472884] pci 0000:05:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 2.472904] pci 0000:05:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 2.473025] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 2.473045] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 2.473051] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 2.473057] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 2.473161] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 2.473185] pci 0000:06:00.0: reg 10: [io 0xce00-0xceff]
[ 2.473228] pci 0000:06:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
[ 2.473256] pci 0000:06:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
[ 2.473274] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 2.473374] pci 0000:06:00.0: supports D1 D2
[ 2.473376] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.473384] pci 0000:06:00.0: PME# disabled
[ 2.480327] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 2.480338] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 2.480348] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 2.480363] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
[ 2.480446] pci 0000:07:06.0: [104c:8024] type 0 class 0x000c00
[ 2.480475] pci 0000:07:06.0: reg 10: [mem 0xfbdff000-0xfbdff7ff]
[ 2.480491] pci 0000:07:06.0: reg 14: [mem 0xfbdf8000-0xfbdfbfff]
[ 2.480606] pci 0000:07:06.0: supports D1 D2
[ 2.480608] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot
[ 2.480615] pci 0000:07:06.0: PME# disabled
[ 2.480674] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 2.480684] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.480694] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 2.480698] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 2.480701] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.480705] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 2.480708] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 2.480766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.481021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 2.481077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 2.481158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 2.481215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 2.481382] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.481387] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 2.481390] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.511626] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 2.511725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 2.511822] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 2.511918] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 2.512015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.512113] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 2.512210] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 2.512306] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 2.512365] xen/balloon: Initialising balloon driver.
[ 2.528500] xen-balloon: Initialising balloon driver.
[ 2.528525] xen/balloon: Xen selfballooning driver disabled for domain0.
[ 2.528652] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.528658] vgaarb: loaded
[ 2.528659] vgaarb: bridge control possible 0000:02:00.0
[ 2.528742] i2c-core: driver [aat2870] using legacy suspend method
[ 2.528745] i2c-core: driver [aat2870] using legacy resume method
[ 2.528802] SCSI subsystem initialized
[ 2.528882] libata version 3.00 loaded.
[ 2.528927] usbcore: registered new interface driver usbfs
[ 2.528939] usbcore: registered new interface driver hub
[ 2.528981] usbcore: registered new device driver usb
[ 2.529085] PCI: Using ACPI for IRQ routing
[ 2.531669] PCI: Discovered peer bus 3f
[ 2.531705] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
[ 2.531765] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
[ 2.531826] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
[ 2.531878] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
[ 2.531936] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
[ 2.531990] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
[ 2.532044] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
[ 2.532100] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
[ 2.532152] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
[ 2.532203] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
[ 2.532255] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
[ 2.532312] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
[ 2.532364] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
[ 2.532417] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
[ 2.532470] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
[ 2.532527] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
[ 2.532579] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
[ 2.532631] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
[ 2.532683] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
[ 2.533181] PCI: pci_cache_line_size set to 64 bytes
[ 2.533395] reserve RAM buffer: 0000000000097000 - 000000000009ffff
[ 2.533399] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 2.533402] reserve RAM buffer: 0000000180120000 - 0000000183ffffff
[ 2.533484] NetLabel: Initializing
[ 2.533487] NetLabel: domain hash size = 128
[ 2.533489] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.533498] NetLabel: unlabeled traffic allowed by default
[ 2.533578] Switching to clocksource xen
[ 2.539394] AppArmor: AppArmor Filesystem Enabled
[ 2.539411] pnp: PnP ACPI init
[ 2.539420] ACPI: bus type pnp registered
[ 2.539581] pnp 00:00: [bus 00-3f]
[ 2.539585] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.539587] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.539590] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.539593] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.539596] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 2.539598] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 2.539673] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 2.539822] pnp 00:01: [io 0x0010-0x001f]
[ 2.539825] pnp 00:01: [io 0x0022-0x003f]
[ 2.539827] pnp 00:01: [io 0x0044-0x005f]
[ 2.539830] pnp 00:01: [io 0x0062-0x0063]
[ 2.539832] pnp 00:01: [io 0x0065-0x006f]
[ 2.539834] pnp 00:01: [io 0x0074-0x007f]
[ 2.539837] pnp 00:01: [io 0x0091-0x0093]
[ 2.539839] pnp 00:01: [io 0x00a2-0x00bf]
[ 2.539841] pnp 00:01: [io 0x00e0-0x00ef]
[ 2.539844] pnp 00:01: [io 0x04d0-0x04d1]
[ 2.539846] pnp 00:01: [io 0x0290-0x029f]
[ 2.539848] pnp 00:01: [io 0x0800-0x087f]
[ 2.539850] pnp 00:01: [io 0x0290-0x0294]
[ 2.539853] pnp 00:01: [io 0x0880-0x088f]
[ 2.539927] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 2.539930] system 00:01: [io 0x0290-0x029f] has been reserved
[ 2.539934] system 00:01: [io 0x0800-0x087f] has been reserved
[ 2.539937] system 00:01: [io 0x0290-0x0294] has been reserved
[ 2.539940] system 00:01: [io 0x0880-0x088f] has been reserved
[ 2.539944] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.539964] pnp 00:02: [dma 4]
[ 2.539966] pnp 00:02: [io 0x0000-0x000f]
[ 2.539968] pnp 00:02: [io 0x0080-0x0090]
[ 2.539971] pnp 00:02: [io 0x0094-0x009f]
[ 2.539973] pnp 00:02: [io 0x00c0-0x00df]
[ 2.540007] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.540105] pnp 00:03: [irq 0 disabled]
[ 2.540109] xen: registering gsi 8 triggering 1 polarity 0
[ 2.540114] xen_map_pirq_gsi: returning irq 8 for gsi 8
[ 2.540116] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 2.540123] pnp 00:03: [irq 8]
[ 2.540125] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.540166] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.540220] pnp 00:04: [io 0x0070-0x0073]
[ 2.540260] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.540276] pnp 00:05: [io 0x0061]
[ 2.540313] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.540327] pnp 00:06: [io 0x00f0-0x00ff]
[ 2.540330] xen: registering gsi 13 triggering 1 polarity 0
[ 2.540334] xen_map_pirq_gsi: returning irq 13 for gsi 13
[ 2.540336] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 2.540341] pnp 00:06: [irq 13]
[ 2.540380] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.540755] pnp 00:07: [io 0x0400-0x04cf]
[ 2.540758] pnp 00:07: [io 0x04d2-0x04ff]
[ 2.540828] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 2.540832] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 2.540836] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.541231] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[ 2.541316] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 2.541320] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.541752] pnp 00:09: [mem 0x000d5200-0x000d7fff]
[ 2.541756] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 2.541758] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 2.541761] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 2.541764] pnp 00:09: [mem 0xdfee0000-0xdfefffff]
[ 2.541766] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 2.541769] pnp 00:09: [mem 0x00100000-0xdfedffff]
[ 2.541771] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 2.541774] pnp 00:09: [mem 0xfed10000-0xfed1dfff]
[ 2.541776] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 2.541779] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 2.541781] pnp 00:09: [mem 0xffb00000-0xffb7ffff]
[ 2.541784] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 2.541786] pnp 00:09: [mem 0x000e0000-0x000effff]
[ 2.541878] system 00:09: [mem 0x000d5200-0x000d7fff] could not be reserved
[ 2.541881] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 2.541885] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 2.541888] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 2.541891] system 00:09: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 2.541894] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.541897] system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved
[ 2.541901] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.541904] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 2.541907] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 2.541910] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.541914] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 2.541917] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 2.541920] system 00:09: [mem 0x000e0000-0x000effff] could not be reserved
[ 2.541924] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.541960] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 2.542018] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.542028] pnp: PnP ACPI: found 11 devices
[ 2.542030] ACPI: ACPI bus type pnp unregistered
[ 2.548697] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 2.548723] PCI: max bus depth: 1 pci_try_num: 2
[ 2.548819] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 2.548824] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 2.548827] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 2.548832] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.548835] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.548852] pci 0000:02:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
[ 2.548855] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 2.548860] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 2.548867] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 2.548873] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.548882] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 2.548897] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 2.548902] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 2.548910] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff]
[ 2.548916] pci 0000:00:1c.0: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 2.548926] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 2.548930] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 2.548938] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 2.548944] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 2.548955] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref]
[ 2.548958] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 2.548962] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 2.548970] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 2.548976] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
[ 2.548986] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 2.548993] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.549012] xen: registering gsi 16 triggering 0 polarity 1
[ 2.549023] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.549028] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.549036] pci 0000:00:01.0: setting latency timer to 64
[ 2.549044] xen: registering gsi 16 triggering 0 polarity 1
[ 2.549047] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.549050] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.549052] Already setup the GSI :16
[ 2.549055] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.549061] pci 0000:00:03.0: setting latency timer to 64
[ 2.549068] xen: registering gsi 16 triggering 0 polarity 1
[ 2.549071] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.549074] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.549076] Already setup the GSI :16
[ 2.549079] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.549086] pci 0000:00:07.0: setting latency timer to 64
[ 2.549096] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 2.549100] xen: registering gsi 16 triggering 0 polarity 1
[ 2.549103] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.549106] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.549108] Already setup the GSI :16
[ 2.549111] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.549119] pci 0000:00:1c.0: setting latency timer to 64
[ 2.549127] xen: registering gsi 17 triggering 0 polarity 1
[ 2.549133] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 2.549138] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.549144] pci 0000:00:1c.1: setting latency timer to 64
[ 2.549153] xen: registering gsi 16 triggering 0 polarity 1
[ 2.549156] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.549159] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.549161] Already setup the GSI :16
[ 2.549164] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.549170] pci 0000:00:1c.4: setting latency timer to 64
[ 2.549181] pci 0000:00:1e.0: setting latency timer to 64
[ 2.549186] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.549189] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.549192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.549195] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 2.549198] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 2.549201] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 2.549205] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 2.549208] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.549213] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 2.549216] pci_bus 0000:04: resource 1 [mem 0xf4200000-0xf43fffff]
[ 2.549220] pci_bus 0000:04: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 2.549224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 2.549228] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 2.549232] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 2.549236] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 2.549239] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 2.549243] pci_bus 0000:06: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
[ 2.549247] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 2.549251] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 2.549254] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 2.549258] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.549262] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
[ 2.549265] pci_bus 0000:07: resource 8 [mem 0xdff00000-0xfebfffff]
[ 2.549269] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 2.549272] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 2.549307] NET: Registered protocol family 2
[ 2.549520] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.550969] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 2.551996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.552158] TCP: Hash tables configured (established 262144 bind 65536)
[ 2.552161] TCP reno registered
[ 2.552204] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.552268] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.552352] NET: Registered protocol family 1
[ 2.552399] xen: registering gsi 16 triggering 0 polarity 1
[ 2.552405] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.552407] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.552410] Already setup the GSI :16
[ 2.552413] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.552437] pci 0000:00:1a.0: PCI INT A disabled
[ 2.552446] xen: registering gsi 21 triggering 0 polarity 1
[ 2.552453] xen: --> pirq=21 -> irq=21 (gsi=21)
[ 2.552458] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.552481] pci 0000:00:1a.1: PCI INT B disabled
[ 2.552489] xen: registering gsi 18 triggering 0 polarity 1
[ 2.552495] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.552500] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.552523] pci 0000:00:1a.2: PCI INT C disabled
[ 2.552533] xen: registering gsi 18 triggering 0 polarity 1
[ 2.552536] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.552539] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.552541] Already setup the GSI :18
[ 2.552544] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.565694] pci 0000:00:1a.7: PCI INT C disabled
[ 2.565728] xen: registering gsi 23 triggering 0 polarity 1
[ 2.565736] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.565741] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.565763] pci 0000:00:1d.0: PCI INT A disabled
[ 2.565772] xen: registering gsi 19 triggering 0 polarity 1
[ 2.565778] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.565782] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.565805] pci 0000:00:1d.1: PCI INT B disabled
[ 2.565813] xen: registering gsi 18 triggering 0 polarity 1
[ 2.565816] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.565819] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.565821] Already setup the GSI :18
[ 2.565824] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.565846] pci 0000:00:1d.2: PCI INT C disabled
[ 2.565857] xen: registering gsi 23 triggering 0 polarity 1
[ 2.565860] xen_map_pirq_gsi: returning irq 23 for gsi 23
[ 2.565862] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.565865] Already setup the GSI :23
[ 2.565867] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.581691] pci 0000:00:1d.7: PCI INT A disabled
[ 2.581738] pci 0000:02:00.0: Boot video device
[ 2.581791] PCI: CLS 64 bytes, default 64
[ 2.582332] audit: initializing netlink socket (disabled)
[ 2.582344] type=2000 audit(1336124227.574:1): initialized
[ 2.601350] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.602798] VFS: Disk quotas dquot_6.5.2
[ 2.602848] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.603292] fuse init (API version 7.17)
[ 2.603394] msgmni has been set to 655
[ 2.603880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.603921] io scheduler noop registered
[ 2.603925] io scheduler deadline registered
[ 2.603959] io scheduler cfq registered (default)
[ 2.604276] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.604443] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.604593] pcieport 0000:00:1c.4: setting latency timer to 64
[ 2.604763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.604784] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.604895] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.604901] ACPI: Power Button [PWRB]
[ 2.604945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.604949] ACPI: Power Button [PWRF]
[ 2.609738] ERST: Table is not found!
[ 2.609742] GHES: HEST is not enabled!
[ 2.610105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.764246] hpet_acpi_add: no address or irqs in _CRS
[ 2.764262] Linux agpgart interface v0.103
[ 2.765650] brd: module loaded
[ 2.766434] loop: module loaded
[ 2.766554] ahci 0000:00:1f.2: version 3.0
[ 2.766567] xen: registering gsi 19 triggering 0 polarity 1
[ 2.766572] xen_map_pirq_gsi: returning irq 19 for gsi 19
[ 2.766575] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.766578] Already setup the GSI :19
[ 2.766581] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.766663] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 2.766686] ahci: SSS flag set, parallel bus scan disabled
[ 2.766725] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 2.766729] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems
[ 2.766736] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.806086] scsi0 : ahci
[ 2.806164] scsi1 : ahci
[ 2.806231] scsi2 : ahci
[ 2.806301] scsi3 : ahci
[ 2.806367] scsi4 : ahci
[ 2.806433] scsi5 : ahci
[ 2.806671] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 325
[ 2.806676] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 325
[ 2.806679] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 325
[ 2.806683] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 325
[ 2.806687] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 325
[ 2.806690] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 325
[ 2.806715] xen: registering gsi 17 triggering 0 polarity 1
[ 2.806719] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.806722] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 2.806724] Already setup the GSI :17
[ 2.806727] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.821697] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.821705] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.821717] ahci 0000:05:00.0: setting latency timer to 64
[ 2.821961] scsi6 : ahci
[ 2.822036] scsi7 : ahci
[ 2.822147] ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
[ 2.822152] ata8: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17
[ 2.822245] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
[ 2.822252] xen: registering gsi 18 triggering 0 polarity 1
[ 2.822257] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.822259] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.822262] Already setup the GSI :18
[ 2.822265] pata_acpi 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.822293] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 2.822308] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 2.822536] Fixed MDIO Bus: probed
[ 2.822551] tun: Universal TUN/TAP device driver, 1.6
[ 2.822553] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.822607] PPP generic driver version 2.4.2
[ 2.822704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.822722] xen: registering gsi 18 triggering 0 polarity 1
[ 2.822727] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.822729] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.822732] Already setup the GSI :18
[ 2.822735] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.822753] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.822758] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.822803] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.822850] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.826735] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 2.826753] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[ 2.841667] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.841804] hub 1-0:1.0: USB hub found
[ 2.841809] hub 1-0:1.0: 6 ports detected
[ 2.841884] xen: registering gsi 23 triggering 0 polarity 1
[ 2.841888] xen_map_pirq_gsi: returning irq 23 for gsi 23
[ 2.841891] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.841893] Already setup the GSI :23
[ 2.841896] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.841914] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.841919] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.841966] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.842007] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.845901] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.845919] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
[ 2.861667] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.861792] hub 2-0:1.0: USB hub found
[ 2.861797] hub 2-0:1.0: 6 ports detected
[ 2.861871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.861886] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.861905] xen: registering gsi 16 triggering 0 polarity 1
[ 2.861909] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 2.861912] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 2.861914] Already setup the GSI :16
[ 2.861917] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.861930] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.861934] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.861981] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.862024] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 2.862160] hub 3-0:1.0: USB hub found
[ 2.862165] hub 3-0:1.0: 2 ports detected
[ 2.862233] xen: registering gsi 21 triggering 0 polarity 1
[ 2.862237] xen_map_pirq_gsi: returning irq 21 for gsi 21
[ 2.862240] xen: --> pirq=21 -> irq=21 (gsi=21)
[ 2.862242] Already setup the GSI :21
[ 2.862245] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.862255] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.862260] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.862310] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.862352] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 2.862479] hub 4-0:1.0: USB hub found
[ 2.862484] hub 4-0:1.0: 2 ports detected
[ 2.862551] xen: registering gsi 18 triggering 0 polarity 1
[ 2.862556] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.862559] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.862561] Already setup the GSI :18
[ 2.862564] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.862574] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.862579] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.862626] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.862656] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 2.862781] hub 5-0:1.0: USB hub found
[ 2.862786] hub 5-0:1.0: 2 ports detected
[ 2.862854] xen: registering gsi 23 triggering 0 polarity 1
[ 2.862858] xen_map_pirq_gsi: returning irq 23 for gsi 23
[ 2.862861] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.862864] Already setup the GSI :23
[ 2.862867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.862877] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.862881] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.862928] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.862959] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 2.863090] hub 6-0:1.0: USB hub found
[ 2.863095] hub 6-0:1.0: 2 ports detected
[ 2.863165] xen: registering gsi 19 triggering 0 polarity 1
[ 2.863169] xen_map_pirq_gsi: returning irq 19 for gsi 19
[ 2.863172] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.863174] Already setup the GSI :19
[ 2.863177] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.863187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.863192] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.863239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.863282] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 2.863406] hub 7-0:1.0: USB hub found
[ 2.863411] hub 7-0:1.0: 2 ports detected
[ 2.863478] xen: registering gsi 18 triggering 0 polarity 1
[ 2.863483] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.863486] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.863488] Already setup the GSI :18
[ 2.863491] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.863501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.863506] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.863556] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.863588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 2.863713] hub 8-0:1.0: USB hub found
[ 2.863718] hub 8-0:1.0: 2 ports detected
[ 2.863832] usbcore: registered new interface driver libusual
[ 2.863860] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.864282] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.864290] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.864434] mousedev: PS/2 mouse device common for all mice
[ 2.864615] rtc_cmos 00:04: RTC can wake from S4
[ 2.864746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.864778] rtc0: alarms up to one month, 242 bytes nvram
[ 2.864840] device-mapper: uevent: version 1.0.3
[ 2.864917] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.864924] EFI Variables Facility v0.08 2004-May-17
[ 2.865139] TCP cubic registered
[ 2.865218] NET: Registered protocol family 10
[ 2.865693] NET: Registered protocol family 17
[ 2.865709] Registering the dns_resolver key type
[ 2.865853] PM: Hibernation image not present or could not be loaded.
[ 2.865863] registered taskstats version 1
[ 2.874865] Magic number: 12:825:625
[ 2.874953] rtc_cmos 00:04: setting system clock to 2012-05-04 09:37:07 UTC (1336124227)
[ 2.875310] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.875313] EDD information not available.
[ 3.125677] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.209669] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 3.313680] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.313711] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.314188] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB02, max UDMA/100
[ 3.314514] ata7.00: HPA detected: current 976771055, native 976773168
[ 3.314603] ata7.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133
[ 3.314610] ata7.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.314919] ata8.00: configured for UDMA/100
[ 3.315569] ata7.00: configured for UDMA/133
[ 3.343469] hub 1-2:1.0: USB hub found
[ 3.343799] hub 1-2:1.0: 4 ports detected
[ 3.445676] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.581676] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.845940] usb 1-2.1: new full-speed USB device number 4 using ehci_hcd
[ 3.937680] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.938574] ata3.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133
[ 3.938581] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.939522] ata3.00: configured for UDMA/133
[ 3.939618] scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 3.939738] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.939764] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.939857] sd 2:0:0:0: [sda] Write Protect is off
[ 3.939862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.939910] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.952649] sda: sda1 < >
[ 3.952948] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.013936] usb 1-2.3: new high-speed USB device number 5 using ehci_hcd
[ 4.107479] hub 1-2.3:1.0: USB hub found
[ 4.107808] hub 1-2.3:1.0: 4 ports detected
[ 4.257672] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.377921] usb 1-2.3.3: new low-speed USB device number 6 using ehci_hcd
[ 4.749671] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.750538] ata5.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133
[ 4.750545] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.751475] ata5.00: configured for UDMA/133
[ 4.751552] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 4.751681] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.751686] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.751768] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.751772] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.751797] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.759298] sdb: sdb1 < sdb5 >
[ 4.759566] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 5.241676] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.242570] ata6.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133
[ 5.242577] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.243554] ata6.00: configured for UDMA/133
[ 5.243619] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 5.243730] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.243742] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 5.243804] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.243809] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.243837] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.243867] scsi 6:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 5.243993] sd 6:0:0:0: [sdd] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 5.244017] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.244084] sd 6:0:0:0: [sdd] Write Protect is off
[ 5.244089] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.244155] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.244645] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB02 PQ: 0 ANSI: 5
[ 5.247992] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.247999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.248118] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 5.248197] sr 7:0:0:0: Attached scsi generic sg4 type 5
[ 5.250149] sdc: unknown partition table
[ 5.250336] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 5.267374] sdd: sdd1 sdd2 sdd3 sdd4
[ 5.267760] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 5.268071] Freeing unused kernel memory: 920k freed
[ 5.268219] Write protecting the kernel read-only data: 12288k
[ 5.272885] Freeing unused kernel memory: 1520k freed
[ 5.273494] Freeing unused kernel memory: 1140k freed
[ 5.308013] udevd[132]: starting version 175
[ 5.331716] xor: automatically using best checksumming function: generic_sse
[ 5.349663] generic_sse: 2980.000 MB/sec
[ 5.349671] xor: using function: generic_sse (2980.000 MB/sec)
[ 5.350809] device-mapper: dm-raid45: initialized v0.2594b
[ 5.390280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.390312] xen: registering gsi 16 triggering 0 polarity 1
[ 5.390324] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 5.390329] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 5.390335] Already setup the GSI :16
[ 5.390341] r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.390390] r8169 0000:06:00.0: setting latency timer to 64
[ 5.391065] r8169 0000:06:00.0: eth0: RTL8168d/8111d at 0xffffc90000c2a000, 00:1f:d0:dc:30:92, XID 081000c0 IRQ 326
[ 5.391072] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.400017] xen: registering gsi 18 triggering 0 polarity 1
[ 5.400028] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 5.400033] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 5.400037] Already setup the GSI :18
[ 5.400045] firewire_ohci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.426325] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[ 5.426466] generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1a.0-1/input0
[ 5.444109] input: Microsoft SideWinder Force Feedback 2 Joystick as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
[ 5.453759] firewire_ohci: Added fw-ohci device 0000:07:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.457035] generic-usb 0003:045E:001B.0002: device reports 0 simultaneous effects
[ 5.466411] generic-usb 0003:045E:001B.0002: pid_block_load failed 60 times
[ 5.466415] generic-usb 0003:045E:001B.0002: upload request failed
[ 5.466422] generic-usb 0003:045E:001B.0002: input,hidraw1: USB HID v1.00 Joystick [Microsoft SideWinder Force Feedback 2 Joystick] on usb-0000:00:1a.7-2.1/input0
[ 5.468987] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/input/input4
[ 5.469093] generic-usb 0003:046D:C03F.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-2.3.3/input0
[ 5.469114] usbcore: registered new interface driver usbhid
[ 5.469116] usbhid: USB HID core driver
[ 5.887488] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.953765] firewire_core: created device fw0: GUID 00ac14fa00001fd0, S400
[ 6.089730] device-mapper: dm-raid45: /dev/sda is raid disk 0
[ 6.089735] device-mapper: dm-raid45: /dev/sdb is raid disk 1
[ 6.089738] device-mapper: dm-raid45: /dev/sdc is raid disk 2
[ 6.089742] device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 80 stripes
[ 6.089743] algorithm "xor_32", 8 chunks with 9687MB/s
[ 6.089744] RAID5 (left asymmetric) set with net 2/3 devices
[ 12.114699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.138489] udevd[813]: starting version 175
[ 12.142198] Adding 8000364k swap on /dev/sdd3. Priority:-1 extents:1 across:8000364k
[ 12.154311] lp: driver loaded but no devices found
[ 12.163818] it87: Found IT8720F chip at 0x290, revision 5
[ 12.163831] it87: VID is disabled (pins used for GPIO)
[ 12.163850] it87: Routing internal VCCH to in7
[ 12.163857] it87: Beeping is supported
[ 12.180420] wmi: Mapper loaded
[ 12.184995] [drm] Initialized drm 1.1.0 20060810
[ 12.200678] EDAC MC: Ver: 2.1.0
[ 12.202418] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 12.202444] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 12.202451] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 12.216439] xen: registering gsi 22 triggering 0 polarity 1
[ 12.216454] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 12.216462] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.216611] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 12.217497] xen: registering gsi 18 triggering 0 polarity 1
[ 12.217502] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 12.217505] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 12.217508] Already setup the GSI :18
[ 12.217512] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 12.217548] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 12.218032] scsi8 : pata_jmicron
[ 12.218152] scsi9 : pata_jmicron
[ 12.219786] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
[ 12.219790] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
[ 12.263346] device-mapper: multipath: version 1.3.0 loaded
[ 12.336747] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 12.542332] hda_codec: ALC888: BIOS auto-probing.
[ 12.543375] Bridge firewalling registered
[ 12.548962] device eth0 entered promiscuous mode
[ 12.551463] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 12.551572] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 12.551683] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.551935] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.552150] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.552297] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.552399] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.552528] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.615063] r8169 0000:06:00.0: eth0: link down
[ 12.615074] r8169 0000:06:00.0: eth0: link down
[ 12.615254] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.620123] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 12.634440] kjournald starting. Commit interval 5 seconds
[ 12.634669] EXT3-fs (sdd2): using internal journal
[ 12.634675] EXT3-fs (sdd2): mounted filesystem with ordered data mode
[ 12.664546] type=1400 audit(1336117037.284:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1318 comm="apparmor_parser"
[ 12.664683] type=1400 audit(1336117037.284:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1330 comm="apparmor_parser"
[ 12.664979] type=1400 audit(1336117037.284:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1318 comm="apparmor_parser"
[ 12.664991] type=1400 audit(1336117037.284:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1330 comm="apparmor_parser"
[ 12.665196] type=1400 audit(1336117037.284:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1318 comm="apparmor_parser"
[ 12.665259] type=1400 audit(1336117037.284:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1330 comm="apparmor_parser"
[ 12.982722] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.813737] init: failsafe main process (1433) killed by TERM signal
[ 13.866358] init: udev-fallback-graphics main process (1546) terminated with status 1
[ 13.878401] type=1400 audit(1336117038.500:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1589 comm="apparmor_parser"
[ 13.878607] type=1400 audit(1336117038.500:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1591 comm="apparmor_parser"
[ 13.878617] type=1400 audit(1336117038.500:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1590 comm="apparmor_parser"
[ 13.878735] type=1400 audit(1336117038.500:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1589 comm="apparmor_parser"
[ 14.084048] Event-channel device installed.
[ 14.119852] XENBUS: Unable to read cpu state
[ 14.119937] XENBUS: Unable to read cpu state
[ 14.120029] XENBUS: Unable to read cpu state
[ 14.120112] XENBUS: Unable to read cpu state
[ 14.120190] XENBUS: Unable to read cpu state
[ 14.120327] XENBUS: Unable to read cpu state
[ 14.120421] XENBUS: Unable to read cpu state
[ 14.120504] XENBUS: Unable to read cpu state
[ 14.276690] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.328570] nf_conntrack version 0.5.0 (2648 buckets, 10592 max)
[ 14.353742] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 15.006250] r8169 0000:06:00.0: eth0: link up
[ 15.006398] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.007175] br0: port 1(eth0) entering forwarding state
[ 15.007179] br0: port 1(eth0) entering forwarding state
[ 15.007314] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 15.266765] Ebtables v2.0 registered
[ 15.283111] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.249649] br0: no IPv6 routers present
[ 140.007915] xen-acpi-processor: Max ACPI ID: 14
[ 140.009899] ACPI CPU0 - P-states uploaded.
[ 140.009901] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.009904] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.009906] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.009907] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.009909] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.009911] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.009913] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.009915] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.009917] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.009918] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.009926] ACPI CPU1 - P-states uploaded.
[ 140.009928] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.009930] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.009932] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.009934] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.009935] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.009937] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.009939] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.009941] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.009943] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.009945] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.009950] ACPI CPU2 - P-states uploaded.
[ 140.009952] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.009954] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.009956] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.009958] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.009960] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.009962] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.009964] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.009965] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.009967] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.009969] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.009975] ACPI CPU3 - P-states uploaded.
[ 140.009977] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.009979] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.009981] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.009983] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.009984] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.009986] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.009988] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.009990] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.009992] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.009994] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.009999] ACPI CPU4 - P-states uploaded.
[ 140.010001] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.010003] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.010005] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.010007] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.010008] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.010010] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.010012] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.010014] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.010016] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.010018] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.010023] ACPI CPU5 - P-states uploaded.
[ 140.010025] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.010027] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.010029] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.010031] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.010033] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.010035] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.010036] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.010038] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.010040] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.010042] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.010046] ACPI CPU6 - P-states uploaded.
[ 140.010048] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.010050] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.010051] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.010053] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.010055] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.010057] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.010059] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.010061] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.010062] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.010064] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.010070] ACPI CPU7 - P-states uploaded.
[ 140.010072] *P0: 2661 MHz, 130000 mW, 10 uS
[ 140.010074] P1: 2660 MHz, 130000 mW, 10 uS
[ 140.010075] P2: 2527 MHz, 109000 mW, 10 uS
[ 140.010077] P3: 2394 MHz, 100000 mW, 10 uS
[ 140.010079] P4: 2261 MHz, 83000 mW, 10 uS
[ 140.010081] P5: 2128 MHz, 76000 mW, 10 uS
[ 140.010083] P6: 1995 MHz, 63000 mW, 10 uS
[ 140.010085] P7: 1862 MHz, 57000 mW, 10 uS
[ 140.010086] P8: 1729 MHz, 47000 mW, 10 uS
[ 140.010088] P9: 1596 MHz, 43000 mW, 10 uS
[ 140.010095] xen-acpi-processor: ACPI CPU0 w/ PBLK:0x410
[ 140.010184] xen-acpi-processor: ACPI CPU1 w/ PBLK:0x410
[ 140.010269] xen-acpi-processor: ACPI CPU2 w/ PBLK:0x410
[ 140.010356] xen-acpi-processor: ACPI CPU3 w/ PBLK:0x410
[ 140.010441] xen-acpi-processor: ACPI CPU4 w/ PBLK:0x410
[ 140.010526] xen-acpi-processor: ACPI CPU5 w/ PBLK:0x410
[ 140.010611] xen-acpi-processor: ACPI CPU6 w/ PBLK:0x410
[ 140.010696] xen-acpi-processor: ACPI CPU7 w/ PBLK:0x410
[ 140.010781] xen-acpi-processor: ACPI CPU8 w/ PBLK:0x410
[ 140.010787] xen-acpi-processor: ACPI CPU9 w/ PBLK:0x410
[ 140.010793] xen-acpi-processor: ACPI CPU10 w/ PBLK:0x410
[ 140.010798] xen-acpi-processor: ACPI CPU11 w/ PBLK:0x410
[ 140.010804] xen-acpi-processor: ACPI CPU12 w/ PBLK:0x410
[ 140.010809] xen-acpi-processor: ACPI CPU13 w/ PBLK:0x410
[ 140.010815] xen-acpi-processor: ACPI CPU14 w/ PBLK:0x410
[ 140.010820] xen-acpi-processor: ACPI CPU15 w/ PBLK:0x410
[ 140.011061] xen-acpi-processor: No _Cx for ACPI CPU 8
[ 140.011064] xen-acpi-processor: No _Cx for ACPI CPU 9
[ 140.011066] xen-acpi-processor: No _Cx for ACPI CPU 10
[ 140.011068] xen-acpi-processor: No _Cx for ACPI CPU 11
[ 140.011070] xen-acpi-processor: No _Cx for ACPI CPU 12
[ 140.011072] xen-acpi-processor: No _Cx for ACPI CPU 13
[ 140.011074] xen-acpi-processor: No _Cx for ACPI CPU 14
[ 183.118282] init: tty1 main process ended, respawning
[-- Attachment #1.1.3: dmesg.opt.txt --]
[-- Type: text/plain, Size: 67655 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38+xendbg8 SMP Thu May 3 17:40:06 UTC 2012 (Ubuntu 3.2.0-24.38+xendbg8-generic 3.2.16)
[ 0.000000] Command line: placeholder root=UUID=f2b75052-a98e-447a-bf78-51b2e1b15b8b ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Freeing 96-100 pfn range: 106 pages freed
[ 0.000000] 1-1 mapping on 96->100
[ 0.000000] 1-1 mapping on dfe90->100000
[ 0.000000] Released 106 pages of unused memory
[ 0.000000] Set 131546 page(s) to 1-1 mapping
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000000096000 (usable)
[ 0.000000] Xen: 0000000000096800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000dfe90000 (usable)
[ 0.000000] Xen: 00000000dfe9e000 - 00000000dfea0000 type 9
[ 0.000000] Xen: 00000000dfea0000 - 00000000dfeb2000 (ACPI data)
[ 0.000000] Xen: 00000000dfeb2000 - 00000000dfee0000 (ACPI NVS)
[ 0.000000] Xen: 00000000dfee0000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000002e0170000 (usable)
[ 0.000000] Xen: 00000002e0170000 - 0000000820000000 (unusable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Supermicro H8SGL/H8SGL, BIOS 1.1a 02/17/11
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x2e0170 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xdfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 04782000
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe90000
[ 0.000000] 0000000000 - 00dfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to dfe90000 @ 8fb000-1000000
[ 0.000000] xen: setting RW the range fd4000 - 1000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000002e0170000
[ 0.000000] 0100000000 - 02e0170000 page 4k
[ 0.000000] kernel direct mapping tables up to 2e0170000 @ 3e8f2000-40000000
[ 0.000000] xen: setting RW the range 3f7fb000 - 40000000
[ 0.000000] RAMDISK: 02060000 - 04782000
[ 0.000000] ACPI: RSDP 00000000000f9fc0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dfea0100 00084 (v01 SMCI 20110217 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dfea0290 000F4 (v04 021711 FACP1552 20110217 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dfea0610 05A04 (v02 1A711 1A711000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dfeb2000 00040
[ 0.000000] ACPI: APIC 00000000dfea0390 000B8 (v02 021711 APIC1552 20110217 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dfea0450 0003C (v01 021711 OEMMCFG 20110217 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dfeb2040 00075 (v01 021711 OEMB1552 20110217 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dfeaa610 00038 (v01 021711 OEMHPET 20110217 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000dfeaa650 000A8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SRAT 00000000dfeaa700 00128 (v02 AMD F10 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dfeaa830 0143C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: EINJ 00000000dfeabc70 00130 (v01 AMIER AMI_EINJ 20110217 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000dfeabe00 00030 (v01 AMIER AMI_BERT 20110217 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000dfeabe30 001B0 (v01 AMIER AMI_ERST 20110217 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000dfeabfe0 000A8 (v01 AMIER ABC_HEST 20110217 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] xxx xen_apic_read(0x20) -> 0x10000000
[ 0.000000] xxx xen_get_apic_id(0x10000000) -> 0x10
[ 0.000000] xxx xen_apic_read(0x30) -> 0x10
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of physical nodes 2
[ 0.000000] Node 0 using interleaving mode 1/0
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000002e0170000
[ 0.000000] Initmem setup node 0 0000000000000000-00000002e0170000
[ 0.000000] NODE_DATA [000000003fffb000 - 000000003fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x002e0170
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000096
[ 0.000000] 0: 0x00000100 -> 0x000dfe90
[ 0.000000] 0: 0x00100000 -> 0x002e0170
[ 0.000000] On node 0 totalpages: 2883462
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1758 pages reserved
[ 0.000000] DMA zone: 2152 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896720 pages, LIFO batch:31
[ 0.000000] Normal zone: 30726 pages used for memmap
[ 0.000000] Normal zone: 1935722 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] xxx xen_apic_read(0x20) -> 0x10000000
[ 0.000000] xxx xen_get_apic_id(0x10000000) -> 0x10
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfe90000 - 00000000dfe9e000
[ 0.000000] PM: Registered nosave memory: 00000000dfe9e000 - 00000000dfea0000
[ 0.000000] PM: Registered nosave memory: 00000000dfea0000 - 00000000dfeb2000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb2000 - 00000000dfee0000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fe5b000 s83072 r8192 d23424 u114688
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2834594
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=f2b75052-a98e-447a-bf78-51b2e1b15b8b ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff88002f200000 - ffff880033200000
[ 0.000000] software IO TLB at phys 0x2f200000 - 0x33200000
[ 0.000000] Memory: 717456k/12060096k available (6654k kernel code, 526248k absent, 10816392k reserved, 6550k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:3072 16
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] allocated 93323264 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2000.170 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.34 BogoMIPS (lpj=8000680)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Yama: becoming mindful.
[ 0.008086] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.017132] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019745] Mount-cache hash table entries: 256
[ 0.019990] Initializing cgroup subsys cpuacct
[ 0.020001] Initializing cgroup subsys memory
[ 0.020001] Initializing cgroup subsys devices
[ 0.020001] Initializing cgroup subsys freezer
[ 0.020001] Initializing cgroup subsys blkio
[ 0.020001] Initializing cgroup subsys perf_event
[ 0.020072] xxx xen_apic_read(0x20) -> 0x10000000
[ 0.020077] xxx xen_get_apic_id(0x10000000) -> 0x10
[ 0.020089] tseg: 00dff00000
[ 0.020096] CPU: Physical Processor ID: 0
[ 0.020100] CPU: Processor Core ID: 0
[ 0.023042] ACPI: Core revision 20110623
[ 0.039041] ftrace: allocating 27104 entries in 107 pages
[ 0.040131] cpu 0 spinlock event irq 273
[ 0.040231] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.040494] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.040626] installing Xen timer for CPU 1
[ 0.040644] cpu 1 spinlock event irq 279
[ 0.004000] dom0=1 cpuid=1
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.040859] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.040985] installing Xen timer for CPU 2
[ 0.041004] cpu 2 spinlock event irq 285
[ 0.004000] dom0=1 cpuid=2
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.041173] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.041291] installing Xen timer for CPU 3
[ 0.041306] cpu 3 spinlock event irq 291
[ 0.004000] dom0=1 cpuid=3
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.041477] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.041597] installing Xen timer for CPU 4
[ 0.041612] cpu 4 spinlock event irq 297
[ 0.004000] dom0=1 cpuid=4
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.041808] NMI watchdog disabled (cpu4): hardware events not enabled
[ 0.041935] installing Xen timer for CPU 5
[ 0.041951] cpu 5 spinlock event irq 303
[ 0.004000] dom0=1 cpuid=5
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.042121] NMI watchdog disabled (cpu5): hardware events not enabled
[ 0.042241] installing Xen timer for CPU 6
[ 0.042257] cpu 6 spinlock event irq 309
[ 0.004000] dom0=1 cpuid=6
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.042422] NMI watchdog disabled (cpu6): hardware events not enabled
[ 0.042541] installing Xen timer for CPU 7
[ 0.042557] cpu 7 spinlock event irq 315
[ 0.004000] dom0=1 cpuid=7
[ 0.004000] xxx xen_get_apic_id(0x0) -> 0x0
[ 0.042727] NMI watchdog disabled (cpu7): hardware events not enabled
[ 0.042763] Brought up 8 CPUs
[ 0.042991] devtmpfs: initialized
[ 0.045406] EVM: security.selinux
[ 0.045410] EVM: security.SMACK64
[ 0.045414] EVM: security.capability
[ 0.045490] PM: Registering ACPI NVS region at dfeb2000 (188416 bytes)
[ 0.045490] Grant table initialized
[ 0.045490] print_constraints: dummy:
[ 0.045490] RTC time: 7:45:48, date: 05/04/12
[ 0.045490] NET: Registered protocol family 16
[ 0.045490] Trying to unpack rootfs image as initramfs...
[ 0.060265] node 0 link 0: io port [1000, ffffff]
[ 0.060279] TOM: 00000000e0000000 aka 3584M
[ 0.060286] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.060296] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.060305] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.060313] node 0 link 0: mmio [a0000, bffff]
[ 0.060321] TOM2: 0000000820000000 aka 33280M
[ 0.060326] bus: [00, 1f] on node 0 link 0
[ 0.060331] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.060336] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.060341] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.060345] bus: 00 index 3 [mem 0x820000000-0xfcffffffff]
[ 0.060369] Extended Config Space enabled on 2 nodes
[ 0.060539] ACPI: bus type pci registered
[ 0.060643] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.060652] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.181523] Freeing initrd memory: 40072k freed
[ 0.219949] PCI: Using configuration type 1 for base access
[ 0.221489] bio: create slab <bio-0> at 0
[ 0.221489] ACPI: Added _OSI(Module Device)
[ 0.221489] ACPI: Added _OSI(Processor Device)
[ 0.221489] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.221489] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.224154] ACPI: EC: Look up EC in DSDT
[ 0.228666] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.253662] ACPI: Interpreter enabled
[ 0.253671] ACPI: (supports S0 S1 S4 S5)
[ 0.253715] ACPI: Using IOAPIC for interrupt routing
[ 0.267308] ACPI: No dock devices found.
[ 0.267371] HEST: Table parsing has been initialized.
[ 0.267379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.267684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.268245] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.268252] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.268258] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.268265] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.268271] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.268344] pci 0000:00:00.0: [1002:5a13] type 0 class 0x000600
[ 0.268542] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806
[ 0.268745] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[ 0.268862] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.268871] pci 0000:00:09.0: PME# disabled
[ 0.268913] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[ 0.269029] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.269038] pci 0000:00:0a.0: PME# disabled
[ 0.269100] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.269138] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.269158] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.269178] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.269198] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.269218] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.269238] pci 0000:00:11.0: reg 24: [mem 0xfe9fa400-0xfe9fa7ff]
[ 0.269347] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.269374] pci 0000:00:12.0: reg 10: [mem 0xfe9f6000-0xfe9f6fff]
[ 0.269497] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.269524] pci 0000:00:12.1: reg 10: [mem 0xfe9f7000-0xfe9f7fff]
[ 0.269658] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.269727] pci 0000:00:12.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[ 0.269885] pci 0000:00:12.2: supports D1 D2
[ 0.269890] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.269900] pci 0000:00:12.2: PME# disabled
[ 0.269940] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.269967] pci 0000:00:13.0: reg 10: [mem 0xfe9f8000-0xfe9f8fff]
[ 0.270090] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.270117] pci 0000:00:13.1: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[ 0.270253] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.270291] pci 0000:00:13.2: reg 10: [mem 0xfe9fac00-0xfe9facff]
[ 0.270449] pci 0000:00:13.2: supports D1 D2
[ 0.270454] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.270464] pci 0000:00:13.2: PME# disabled
[ 0.270509] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.270700] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.270844] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.270925] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.270953] pci 0000:00:14.5: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.271126] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.271255] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.271316] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.271384] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.271474] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.271587] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
[ 0.271703] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
[ 0.271767] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
[ 0.271833] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
[ 0.271926] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
[ 0.272016] pci 0000:03:00.0: [8086:10d3] type 0 class 0x000200
[ 0.272016] pci 0000:03:00.0: reg 10: [mem 0xfebe0000-0xfebfffff]
[ 0.272016] pci 0000:03:00.0: reg 18: [io 0xe800-0xe81f]
[ 0.272016] pci 0000:03:00.0: reg 1c: [mem 0xfebdc000-0xfebdffff]
[ 0.272031] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.272042] pci 0000:03:00.0: PME# disabled
[ 0.280056] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.280070] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.280080] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.280204] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200
[ 0.280239] pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
[ 0.280284] pci 0000:02:00.0: reg 18: [io 0xd800-0xd81f]
[ 0.280341] pci 0000:02:00.0: reg 1c: [mem 0xfeadc000-0xfeadffff]
[ 0.280522] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.280533] pci 0000:02:00.0: PME# disabled
[ 0.288055] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.288068] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.288077] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.288144] pci 0000:01:04.0: [102b:0532] type 0 class 0x000300
[ 0.288183] pci 0000:01:04.0: reg 10: [mem 0xfc000000-0xfcffffff pref]
[ 0.288206] pci 0000:01:04.0: reg 14: [mem 0xfdffc000-0xfdffffff]
[ 0.288229] pci 0000:01:04.0: reg 18: [mem 0xfe000000-0xfe7fffff]
[ 0.288437] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.288452] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
[ 0.288462] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref]
[ 0.288500] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.288507] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.288514] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.288520] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.288527] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.288562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.288973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
[ 0.289046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[ 0.289157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.289332] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.289340] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.289346] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.307588] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.307762] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.307897] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.308018] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 *14 15)
[ 0.308136] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 *15)
[ 0.308278] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.308414] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[ 0.308552] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.308623] xen/balloon: Initialising balloon driver.
[ 0.352000] xen-balloon: Initialising balloon driver.
[ 0.352021] xen/balloon: Xen selfballooning driver disabled for domain0.
[ 0.352167] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.352167] vgaarb: loaded
[ 0.352167] vgaarb: bridge control possible 0000:01:04.0
[ 0.352240] i2c-core: driver [aat2870] using legacy suspend method
[ 0.352245] i2c-core: driver [aat2870] using legacy resume method
[ 0.352336] SCSI subsystem initialized
[ 0.352409] libata version 3.00 loaded.
[ 0.352409] usbcore: registered new interface driver usbfs
[ 0.352409] usbcore: registered new interface driver hub
[ 0.352409] usbcore: registered new device driver usb
[ 0.352409] PCI: Using ACPI for IRQ routing
[ 0.356021] PCI: pci_cache_line_size set to 64 bytes
[ 0.356021] reserve RAM buffer: 0000000000096000 - 000000000009ffff
[ 0.356021] reserve RAM buffer: 00000000dfe90000 - 00000000dfffffff
[ 0.356021] reserve RAM buffer: 00000002e0170000 - 00000002e3ffffff
[ 0.356116] NetLabel: Initializing
[ 0.356120] NetLabel: domain hash size = 128
[ 0.356125] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.356141] NetLabel: unlabeled traffic allowed by default
[ 0.356218] Switching to clocksource xen
[ 0.365440] AppArmor: AppArmor Filesystem Enabled
[ 0.365479] pnp: PnP ACPI init
[ 0.365499] ACPI: bus type pnp registered
[ 0.365893] pnp 00:00: [bus 00-ff]
[ 0.365898] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.365904] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.365909] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.365914] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.365919] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.365925] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled]
[ 0.365930] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.366054] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.366329] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.366335] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.366414] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366595] pnp 00:02: [mem 0xf6000000-0xf6003fff]
[ 0.366656] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
[ 0.366664] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367350] pnp 00:03: [dma 4]
[ 0.367355] pnp 00:03: [io 0x0000-0x000f]
[ 0.367360] pnp 00:03: [io 0x0081-0x0083]
[ 0.367365] pnp 00:03: [io 0x0087]
[ 0.367369] pnp 00:03: [io 0x0089-0x008b]
[ 0.367374] pnp 00:03: [io 0x008f]
[ 0.367378] pnp 00:03: [io 0x00c0-0x00df]
[ 0.367436] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.367463] pnp 00:04: [io 0x0070-0x0071]
[ 0.367470] xen: registering gsi 8 triggering 1 polarity 0
[ 0.367480] xen_map_pirq_gsi: returning irq 8 for gsi 8
[ 0.367485] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.367507] pnp 00:04: [irq 8]
[ 0.367564] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.367635] pnp 00:05: [io 0x0060]
[ 0.367639] pnp 00:05: [io 0x0064]
[ 0.367644] xen: registering gsi 1 triggering 1 polarity 0
[ 0.367649] xen_map_pirq_gsi: returning irq 1 for gsi 1
[ 0.367654] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.367671] pnp 00:05: [irq 1]
[ 0.367726] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.367842] xen: registering gsi 12 triggering 1 polarity 0
[ 0.367848] xen_map_pirq_gsi: returning irq 12 for gsi 12
[ 0.367852] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.367869] pnp 00:06: [irq 12]
[ 0.367929] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.367951] pnp 00:07: [io 0x0061]
[ 0.368009] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.368030] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.368035] xen: registering gsi 13 triggering 1 polarity 0
[ 0.368041] xen_map_pirq_gsi: returning irq 13 for gsi 13
[ 0.368045] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.368071] pnp 00:08: [irq 13]
[ 0.368128] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.368329] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.368335] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.368340] pnp 00:09: [io 0x0a10-0x0a1f]
[ 0.368456] system 00:09: [io 0x0a10-0x0a1f] has been reserved
[ 0.368463] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368556] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.368618] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.368922] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.368927] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.369011] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.369018] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.369025] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369526] pnp 00:0c: [io 0x0010-0x001f]
[ 0.369531] pnp 00:0c: [io 0x0022-0x003f]
[ 0.369536] pnp 00:0c: [io 0x0062-0x0063]
[ 0.369540] pnp 00:0c: [io 0x0065-0x006f]
[ 0.369545] pnp 00:0c: [io 0x0072-0x007f]
[ 0.369549] pnp 00:0c: [io 0x0080]
[ 0.369553] pnp 00:0c: [io 0x0084-0x0086]
[ 0.369558] pnp 00:0c: [io 0x0088]
[ 0.369562] pnp 00:0c: [io 0x008c-0x008e]
[ 0.369566] pnp 00:0c: [io 0x0090-0x009f]
[ 0.369571] pnp 00:0c: [io 0x00a2-0x00bf]
[ 0.369575] pnp 00:0c: [io 0x00b1]
[ 0.369580] pnp 00:0c: [io 0x00e0-0x00ef]
[ 0.369584] pnp 00:0c: [io 0x0ca2-0x0ca3]
[ 0.369589] pnp 00:0c: [io 0x0550-0x0551]
[ 0.369593] pnp 00:0c: [io 0x04d0-0x04d1]
[ 0.369597] pnp 00:0c: [io 0x040b]
[ 0.369602] pnp 00:0c: [io 0x04d6]
[ 0.369606] pnp 00:0c: [io 0x0c00-0x0c01]
[ 0.369610] pnp 00:0c: [io 0x0c14]
[ 0.369615] pnp 00:0c: [io 0x0c50-0x0c51]
[ 0.369619] pnp 00:0c: [io 0x0c52]
[ 0.369623] pnp 00:0c: [io 0x0c6c]
[ 0.369627] pnp 00:0c: [io 0x0c6f]
[ 0.369632] pnp 00:0c: [io 0x0cd0-0x0cd1]
[ 0.369636] pnp 00:0c: [io 0x0cd2-0x0cd3]
[ 0.369640] pnp 00:0c: [io 0x0cd4-0x0cd5]
[ 0.369645] pnp 00:0c: [io 0x0cd6-0x0cd7]
[ 0.369649] pnp 00:0c: [io 0x0cd8-0x0cdf]
[ 0.369654] pnp 00:0c: [io 0x0800-0x089f]
[ 0.369659] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.369664] pnp 00:0c: [io 0x0b00-0x0b0f]
[ 0.369668] pnp 00:0c: [io 0x0b20-0x0b3f]
[ 0.369673] pnp 00:0c: [io 0x0900-0x090f]
[ 0.369677] pnp 00:0c: [io 0x0910-0x091f]
[ 0.369682] pnp 00:0c: [io 0xfe00-0xfefe]
[ 0.369686] pnp 00:0c: [io 0x0060-0x005f disabled]
[ 0.369691] pnp 00:0c: [io 0x0064-0x0063 disabled]
[ 0.369696] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
[ 0.369704] pnp 00:0c: [mem 0xfec10000-0xfec1001f]
[ 0.369849] system 00:0c: [io 0x0ca2-0x0ca3] has been reserved
[ 0.369855] system 00:0c: [io 0x0550-0x0551] has been reserved
[ 0.369861] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.369867] system 00:0c: [io 0x040b] has been reserved
[ 0.369873] system 00:0c: [io 0x04d6] has been reserved
[ 0.369878] system 00:0c: [io 0x0c00-0x0c01] has been reserved
[ 0.369884] system 00:0c: [io 0x0c14] has been reserved
[ 0.369889] system 00:0c: [io 0x0c50-0x0c51] has been reserved
[ 0.369895] system 00:0c: [io 0x0c52] has been reserved
[ 0.369901] system 00:0c: [io 0x0c6c] has been reserved
[ 0.369906] system 00:0c: [io 0x0c6f] has been reserved
[ 0.369912] system 00:0c: [io 0x0cd0-0x0cd1] has been reserved
[ 0.369918] system 00:0c: [io 0x0cd2-0x0cd3] has been reserved
[ 0.369923] system 00:0c: [io 0x0cd4-0x0cd5] has been reserved
[ 0.369929] system 00:0c: [io 0x0cd6-0x0cd7] has been reserved
[ 0.369935] system 00:0c: [io 0x0cd8-0x0cdf] has been reserved
[ 0.369944] system 00:0c: [io 0x0800-0x089f] has been reserved
[ 0.369950] system 00:0c: [io 0x0b00-0x0b0f] has been reserved
[ 0.369955] system 00:0c: [io 0x0b20-0x0b3f] has been reserved
[ 0.369961] system 00:0c: [io 0x0900-0x090f] has been reserved
[ 0.369967] system 00:0c: [io 0x0910-0x091f] has been reserved
[ 0.369973] system 00:0c: [io 0xfe00-0xfefe] has been reserved
[ 0.369980] system 00:0c: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.369986] system 00:0c: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.369993] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.370547] pnp 00:0d: [io 0x03f8-0x03ff]
[ 0.370553] xen: registering gsi 4 triggering 1 polarity 0
[ 0.370558] xen_map_pirq_gsi: returning irq 4 for gsi 4
[ 0.370563] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.370576] pnp 00:0d: [irq 4]
[ 0.370581] pnp 00:0d: [dma 0 disabled]
[ 0.370705] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.371284] pnp 00:0e: [io 0x02f8-0x02ff]
[ 0.371289] xen: registering gsi 3 triggering 1 polarity 0
[ 0.371295] xen_map_pirq_gsi: returning irq 3 for gsi 3
[ 0.371300] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.371305] Already setup the GSI :3
[ 0.371309] pnp 00:0e: [irq 3]
[ 0.371314] pnp 00:0e: [dma 0 disabled]
[ 0.371433] pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.371577] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[ 0.371661] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.371668] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372634] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 0.372640] pnp 00:10: [mem 0x000c0000-0x000cffff]
[ 0.372645] pnp 00:10: [mem 0x000e0000-0x000fffff]
[ 0.372650] pnp 00:10: [mem 0x00100000-0xdfffffff]
[ 0.372659] pnp 00:10: [mem 0xfec00000-0xffffffff]
[ 0.372759] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.372766] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.372772] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.372779] system 00:10: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.372785] system 00:10: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.372792] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.373111] pnp: PnP ACPI: found 17 devices
[ 0.373116] ACPI: ACPI bus type pnp unregistered
[ 0.380486] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.380513] PCI: max bus depth: 1 pci_try_num: 2
[ 0.380551] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.380558] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.380568] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.380582] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.380588] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.380598] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.380612] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.380630] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
[ 0.380640] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref]
[ 0.380663] xen: registering gsi 17 triggering 0 polarity 1
[ 0.380681] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 0.380696] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.380706] pci 0000:00:09.0: setting latency timer to 64
[ 0.380717] xen: registering gsi 18 triggering 0 polarity 1
[ 0.380728] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 0.380740] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.380749] pci 0000:00:0a.0: setting latency timer to 64
[ 0.380765] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.380770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.380775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.380781] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.380786] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.380792] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.380798] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.380804] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.380809] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.380816] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfe7fffff]
[ 0.380822] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfcffffff pref]
[ 0.380828] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.380833] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.380839] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.380877] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.380883] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.380940] NET: Registered protocol family 2
[ 0.383015] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.388281] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.391514] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.391860] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.391866] TCP reno registered
[ 0.392022] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.392296] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.392549] NET: Registered protocol family 1
[ 0.392605] xen: registering gsi 16 triggering 0 polarity 1
[ 0.392628] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 0.392649] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.120157] pci 0000:00:12.0: PCI INT A disabled
[ 1.120188] xen: registering gsi 16 triggering 0 polarity 1
[ 1.120202] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 1.120207] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 1.120212] Already setup the GSI :16
[ 1.120218] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.204175] pci 0000:00:12.1: PCI INT A disabled
[ 1.204209] xen: registering gsi 17 triggering 0 polarity 1
[ 1.204223] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 1.204228] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 1.204233] Already setup the GSI :17
[ 1.204239] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.204376] pci 0000:00:12.2: PCI INT B disabled
[ 1.204391] xen: registering gsi 18 triggering 0 polarity 1
[ 1.204397] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 1.204401] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 1.204405] Already setup the GSI :18
[ 1.204410] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.288203] pci 0000:00:13.0: PCI INT A disabled
[ 1.288235] xen: registering gsi 18 triggering 0 polarity 1
[ 1.288248] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 1.288253] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 1.288259] Already setup the GSI :18
[ 1.288264] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.372178] pci 0000:00:13.1: PCI INT A disabled
[ 1.372212] xen: registering gsi 19 triggering 0 polarity 1
[ 1.372238] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 1.372256] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.372392] pci 0000:00:13.2: PCI INT B disabled
[ 1.372417] xen: registering gsi 18 triggering 0 polarity 1
[ 1.372423] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 1.372428] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 1.372433] Already setup the GSI :18
[ 1.372437] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.456174] pci 0000:00:14.5: PCI INT C disabled
[ 1.456260] pci 0000:01:04.0: Boot video device
[ 1.456268] PCI: CLS 64 bytes, default 64
[ 1.457351] audit: initializing netlink socket (disabled)
[ 1.457370] type=2000 audit(1336117549.732:1): initialized
[ 1.485594] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.487850] VFS: Disk quotas dquot_6.5.2
[ 1.487931] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.488646] fuse init (API version 7.17)
[ 1.488820] msgmni has been set to 1479
[ 1.489539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.489597] io scheduler noop registered
[ 1.489602] io scheduler deadline registered
[ 1.489645] io scheduler cfq registered (default)
[ 1.490128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.490164] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.490353] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.490364] ACPI: Power Button [PWRB]
[ 1.490424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.490432] ACPI: Power Button [PWRF]
[ 1.692991] APEI: Can not request iomem region <00000000dfec60ea-00000000dfec60ec> for GARs.
[ 1.693118] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[ 1.693300] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 1.693866] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.697843] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.722349] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.848430] hpet_acpi_add: no address or irqs in _CRS
[ 1.848451] Linux agpgart interface v0.103
[ 1.852373] brd: module loaded
[ 1.853467] loop: module loaded
[ 1.853824] ahci 0000:00:11.0: version 3.0
[ 1.853849] xen: registering gsi 22 triggering 0 polarity 1
[ 1.853871] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 1.853890] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.854111] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.854121] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.855082] scsi0 : ahci
[ 1.855199] scsi1 : ahci
[ 1.855293] scsi2 : ahci
[ 1.855392] scsi3 : ahci
[ 1.855498] scsi4 : ahci
[ 1.855590] scsi5 : ahci
[ 1.856528] ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22
[ 1.856537] ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22
[ 1.856544] ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22
[ 1.856552] ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22
[ 1.856559] ata5: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa700 irq 22
[ 1.856566] ata6: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa780 irq 22
[ 1.857062] Fixed MDIO Bus: probed
[ 1.857086] tun: Universal TUN/TAP device driver, 1.6
[ 1.857092] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.857178] PPP generic driver version 2.4.2
[ 1.857328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.857416] xen: registering gsi 17 triggering 0 polarity 1
[ 1.857425] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 1.857430] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 1.857435] Already setup the GSI :17
[ 1.857441] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.857474] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.857569] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.857582] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.857679] ehci_hcd 0000:00:12.2: debug port 1
[ 1.857734] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9fa800
[ 1.868101] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.868295] hub 1-0:1.0: USB hub found
[ 1.868303] hub 1-0:1.0: 6 ports detected
[ 1.868553] xen: registering gsi 19 triggering 0 polarity 1
[ 1.868561] xen_map_pirq_gsi: returning irq 19 for gsi 19
[ 1.868566] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 1.868571] Already setup the GSI :19
[ 1.868576] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.868610] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.868733] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.868749] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.868809] ehci_hcd 0000:00:13.2: debug port 1
[ 1.868857] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fac00
[ 1.880099] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.880312] hub 2-0:1.0: USB hub found
[ 1.880320] hub 2-0:1.0: 6 ports detected
[ 1.880437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.880591] xen: registering gsi 16 triggering 0 polarity 1
[ 1.880598] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 1.880603] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 1.880608] Already setup the GSI :16
[ 1.880613] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.880648] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.880742] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.880808] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9f6000
[ 1.940279] hub 3-0:1.0: USB hub found
[ 1.940294] hub 3-0:1.0: 3 ports detected
[ 1.940504] xen: registering gsi 16 triggering 0 polarity 1
[ 1.940512] xen_map_pirq_gsi: returning irq 16 for gsi 16
[ 1.940517] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 1.940521] Already setup the GSI :16
[ 1.940527] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.940562] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.940640] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.940680] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9f7000
[ 2.000312] hub 4-0:1.0: USB hub found
[ 2.000326] hub 4-0:1.0: 3 ports detected
[ 2.000550] xen: registering gsi 18 triggering 0 polarity 1
[ 2.000558] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.000562] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.000567] Already setup the GSI :18
[ 2.000572] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.000607] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.000697] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.000763] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9f8000
[ 2.060288] hub 5-0:1.0: USB hub found
[ 2.060302] hub 5-0:1.0: 3 ports detected
[ 2.060512] xen: registering gsi 18 triggering 0 polarity 1
[ 2.060520] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.060525] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.060530] Already setup the GSI :18
[ 2.060535] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.060569] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.060639] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.060679] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9f9000
[ 2.120307] hub 6-0:1.0: USB hub found
[ 2.120322] hub 6-0:1.0: 3 ports detected
[ 2.120531] xen: registering gsi 18 triggering 0 polarity 1
[ 2.120539] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.120544] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.120548] Already setup the GSI :18
[ 2.120554] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.120589] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.120658] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.120697] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fb000
[ 2.176217] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.180292] hub 7-0:1.0: USB hub found
[ 2.180305] hub 7-0:1.0: 2 ports detected
[ 2.180389] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.180472] usbcore: registered new interface driver libusual
[ 2.180529] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.183449] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.183462] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.183618] mousedev: PS/2 mouse device common for all mice
[ 2.183827] rtc_cmos 00:04: RTC can wake from S4
[ 2.184001] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.184056] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.184170] device-mapper: uevent: version 1.0.3
[ 2.184272] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.184285] EFI Variables Facility v0.08 2004-May-17
[ 2.184602] TCP cubic registered
[ 2.184733] NET: Registered protocol family 10
[ 2.185460] NET: Registered protocol family 17
[ 2.185485] Registering the dns_resolver key type
[ 2.185692] PM: Hibernation image not present or could not be loaded.
[ 2.185709] registered taskstats version 1
[ 2.192089] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.203117] Magic number: 12:269:773
[ 2.203129] hub 2-0:1.0: hash matches
[ 2.203312] rtc_cmos 00:04: setting system clock to 2012-05-04 07:45:50 UTC (1336117550)
[ 2.203445] powernow-k8: Found 1 AMD Opteron(tm) Processor 6128 (8 cpu cores) (version 2.20.00)
[ 2.203553] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.203558] EDD information not available.
[ 2.216671] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.330229] Initializing USB Mass Storage driver...
[ 2.330450] scsi6 : usb-storage 2-2:1.0
[ 2.330530] usbcore: registered new interface driver usb-storage
[ 2.330536] USB Mass Storage support registered.
[ 2.352138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352171] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352197] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352222] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352246] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.352815] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB03, max UDMA/100
[ 2.353565] ata6.00: configured for UDMA/100
[ 2.361793] ata1.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133
[ 2.361801] ata1.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.362506] ata4.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133
[ 2.362513] ata4.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.362961] ata1.00: configured for UDMA/133
[ 2.363111] scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.363320] sd 0:0:0:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB)
[ 2.363455] sd 0:0:0:0: [sda] Write Protect is off
[ 2.363461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.363501] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.363592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.363707] ata4.00: configured for UDMA/133
[ 2.364219] ata2.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133
[ 2.364226] ata2.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.364758] ata3.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133
[ 2.364765] ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.365423] ata2.00: configured for UDMA/133
[ 2.365595] scsi 1:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.365803] sd 1:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB)
[ 2.365808] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.365866] ata3.00: configured for UDMA/133
[ 2.365956] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.365962] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.366002] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.366038] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.366232] sd 2:0:0:0: [sdc] 490350672 512-byte logical blocks: (251 GB/233 GiB)
[ 2.366251] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.366340] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.366347] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.366389] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.366409] scsi 3:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.366595] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.366642] sd 3:0:0:0: [sdd] 490350672 512-byte logical blocks: (251 GB/233 GiB)
[ 2.366810] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.366817] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.366855] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.367260] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB03 PQ: 0 ANSI: 5
[ 2.370973] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.370981] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.371158] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.371246] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 2.375170] sdd: unknown partition table
[ 2.375459] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.376358] sdb: sdb1 sdb2
[ 2.376797] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.377565] sdc: unknown partition table
[ 2.377850] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.480467] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 >
[ 2.481471] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.482098] Freeing unused kernel memory: 920k freed
[ 2.482415] Write protecting the kernel read-only data: 12288k
[ 2.489624] Freeing unused kernel memory: 1520k freed
[ 2.490773] Freeing unused kernel memory: 1140k freed
[ 2.557089] udevd[165]: starting version 175
[ 2.636458] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.636467] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.636601] e1000e 0000:03:00.0: Disabling ASPM L0s
[ 2.636626] xen: registering gsi 17 triggering 0 polarity 1
[ 2.636639] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.636644] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 2.636650] Already setup the GSI :17
[ 2.636656] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.636687] e1000e 0000:03:00.0: setting latency timer to 64
[ 2.708140] usb 5-3: new full-speed USB device number 2 using ohci_hcd
[ 2.749851] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:29:de:05
[ 2.749861] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.749946] e1000e 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
[ 2.750112] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 2.750137] xen: registering gsi 18 triggering 0 polarity 1
[ 2.750148] xen_map_pirq_gsi: returning irq 18 for gsi 18
[ 2.750153] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.750159] Already setup the GSI :18
[ 2.750164] e1000e 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.750195] e1000e 0000:02:00.0: setting latency timer to 64
[ 2.861339] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:29:de:04
[ 2.861348] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 2.861432] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
[ 2.890458] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3
[ 2.890716] generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input0
[ 2.894400] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input4
[ 2.894568] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input1
[ 2.894593] usbcore: registered new interface driver usbhid
[ 2.894599] usbhid: USB HID core driver
[ 3.329089] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.329668] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.330387] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.331105] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 3.332076] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 3.332307] sd 6:0:0:1: Attached scsi generic sg6 type 0
[ 3.332917] sd 6:0:0:2: Attached scsi generic sg7 type 0
[ 3.333248] sd 6:0:0:3: Attached scsi generic sg8 type 0
[ 3.337387] sd 6:0:0:1: [sdf] Attached SCSI removable disk
[ 3.341169] sd 6:0:0:3: [sdh] Attached SCSI removable disk
[ 3.341766] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 3.345257] sd 6:0:0:2: [sdg] Attached SCSI removable disk
[ 9.072230] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null)
[ 15.826798] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.826809] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.857000] udevd[690]: starting version 175
[ 15.968225] Adding 32226300k swap on /dev/sda2. Priority:-1 extents:1 across:32226300k
[ 15.993626] MCE: In-kernel MCE decoding enabled.
[ 15.994765] lp: driver loaded but no devices found
[ 15.994879] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.996578] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 15.996892] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 15.998543] type=1400 audit(1336117564.289:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[ 15.999196] type=1400 audit(1336117564.289:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[ 15.999554] type=1400 audit(1336117564.289:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[ 16.006597] EDAC MC: Ver: 2.1.0
[ 16.012142] ipmi message handler version 39.2
[ 16.012461] device-mapper: multipath: version 1.3.0 loaded
[ 16.014209] ipmi device interface
[ 16.017746] AMD64 EDAC driver v3.4.0
[ 16.021604] EDAC amd64: DRAM ECC enabled.
[ 16.021668] EDAC amd64: F10h detected (node 0).
[ 16.021752] EDAC MC: DCT0 chip selects:
[ 16.021756] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 16.021760] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 16.021763] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 16.021766] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 16.021769] EDAC MC: DCT1 chip selects:
[ 16.021771] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 16.021774] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 16.021777] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 16.021780] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 16.021783] EDAC amd64: using x8 syndromes.
[ 16.021786] EDAC amd64: MCT channel count: 2
[ 16.021829] EDAC amd64: CS0: Unbuffered DDR3 RAM
[ 16.021833] EDAC amd64: CS1: Unbuffered DDR3 RAM
[ 16.021836] EDAC amd64: CS2: Unbuffered DDR3 RAM
[ 16.021839] EDAC amd64: CS3: Unbuffered DDR3 RAM
[ 16.021916] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 16.022350] IPMI System Interface driver.
[ 16.022584] ipmi_si: probing via SMBIOS
[ 16.022589] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 16.022593] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 16.022600] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 16.022975] EDAC amd64: DRAM ECC enabled.
[ 16.022981] EDAC amd64: F10h detected (node 1).
[ 16.023069] EDAC MC: DCT0 chip selects:
[ 16.023076] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 16.023080] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 16.023083] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 16.023086] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 16.023088] EDAC MC: DCT1 chip selects:
[ 16.023091] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 16.023098] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 16.023101] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 16.023104] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 16.023107] EDAC amd64: using x8 syndromes.
[ 16.023110] EDAC amd64: MCT channel count: 2
[ 16.023170] EDAC amd64: CS0: Unbuffered DDR3 RAM
[ 16.023173] EDAC amd64: CS1: Unbuffered DDR3 RAM
[ 16.023180] EDAC amd64: CS2: Unbuffered DDR3 RAM
[ 16.023183] EDAC amd64: CS3: Unbuffered DDR3 RAM
[ 16.023295] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
[ 16.023410] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 16.042005] Bridge firewalling registered
[ 16.053097] device eth0 entered promiscuous mode
[ 16.132100] ipmi_si: Invalid return from get global enables command, cannot enable the event buffer.
[ 16.151879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.160814] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980, prod_id: 0xa711, dev_id: 0x20)
[ 16.160999] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[ 16.182200] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 16.319392] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.330234] EXT4-fs (sda15): re-mounted. Opts: errors=remount-ro
[ 17.144823] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 17.593397] EXT4-fs (dm-30): mounted filesystem with ordered data mode. Opts: (null)
[ 19.417104] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 19.419524] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.419662] br0: port 1(eth0) entering forwarding state
[ 19.419679] br0: port 1(eth0) entering forwarding state
[ 19.421850] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.013339] init: udev-fallback-graphics main process (1809) terminated with status 1
[ 23.151179] init: failsafe main process (1693) killed by TERM signal
[ 23.262932] type=1400 audit(1336117571.553:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1907 comm="apparmor_parser"
[ 23.263053] type=1400 audit(1336117571.553:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1905 comm="apparmor_parser"
[ 23.263150] type=1400 audit(1336117571.553:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1908 comm="apparmor_parser"
[ 23.263716] type=1400 audit(1336117571.553:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1905 comm="apparmor_parser"
[ 23.264106] type=1400 audit(1336117571.557:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1905 comm="apparmor_parser"
[ 23.264198] type=1400 audit(1336117571.557:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1909 comm="apparmor_parser"
[ 23.264557] type=1400 audit(1336117571.557:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1909 comm="apparmor_parser"
[ 23.264863] type=1400 audit(1336117571.557:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1911 comm="apparmor_parser"
[ 23.544492] init: Failed to spawn alsa-restore main process: unable to execute: No such file or directory
[ 23.762025] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.862906] nf_conntrack version 0.5.0 (5946 buckets, 23784 max)
[ 23.915808] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 24.143570] Event-channel device installed.
[ 24.207277] XENBUS: Unable to read cpu state
[ 24.207486] XENBUS: Unable to read cpu state
[ 24.207676] XENBUS: Unable to read cpu state
[ 24.207856] XENBUS: Unable to read cpu state
[ 24.208129] XENBUS: Unable to read cpu state
[ 24.208292] XENBUS: Unable to read cpu state
[ 24.208467] XENBUS: Unable to read cpu state
[ 24.208605] XENBUS: Unable to read cpu state
[ 25.164557] Ebtables v2.0 registered
[ 25.195793] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.556089] br0: no IPv6 routers present
[ 112.342255] xen-acpi-processor: Max ACPI ID: 16
[ 112.344764] ACPI CPU1 - P-states uploaded.
[ 112.344771] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344775] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344779] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344782] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.344785] P4: 800 MHz, 4777 mW, 4 uS
[ 112.344804] ACPI CPU2 - P-states uploaded.
[ 112.344809] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344817] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344823] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344829] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.344834] P4: 800 MHz, 4777 mW, 4 uS
[ 112.344856] ACPI CPU3 - P-states uploaded.
[ 112.344861] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344865] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344871] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344876] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.344881] P4: 800 MHz, 4777 mW, 4 uS
[ 112.344900] ACPI CPU4 - P-states uploaded.
[ 112.344905] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344910] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344915] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344920] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.344925] P4: 800 MHz, 4777 mW, 4 uS
[ 112.344937] ACPI CPU5 - P-states uploaded.
[ 112.344942] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344947] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344952] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344957] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.344962] P4: 800 MHz, 4777 mW, 4 uS
[ 112.344972] ACPI CPU6 - P-states uploaded.
[ 112.344979] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.344984] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.344991] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.344995] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.345000] P4: 800 MHz, 4777 mW, 4 uS
[ 112.345013] ACPI CPU7 - P-states uploaded.
[ 112.345017] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.345022] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.345028] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.345033] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.345037] P4: 800 MHz, 4777 mW, 4 uS
[ 112.345049] ACPI CPU8 - P-states uploaded.
[ 112.345054] *P0: 2000 MHz, 10580 mW, 4 uS
[ 112.345059] P1: 1500 MHz, 8265 mW, 4 uS
[ 112.345064] P2: 1200 MHz, 6825 mW, 4 uS
[ 112.345069] P3: 1000 MHz, 5600 mW, 4 uS
[ 112.345074] P4: 800 MHz, 4777 mW, 4 uS
[ 112.345100] xen-acpi-processor: ACPI CPU1 w/ PBLK:0x810
[ 112.345116] xen-acpi-processor: ACPI CPU2 w/ PBLK:0x0
[ 112.345128] xen-acpi-processor: ACPI CPU3 w/ PBLK:0x0
[ 112.345140] xen-acpi-processor: ACPI CPU4 w/ PBLK:0x0
[ 112.345150] xen-acpi-processor: ACPI CPU5 w/ PBLK:0x0
[ 112.345163] xen-acpi-processor: ACPI CPU6 w/ PBLK:0x0
[ 112.345175] xen-acpi-processor: ACPI CPU7 w/ PBLK:0x0
[ 112.345188] xen-acpi-processor: ACPI CPU8 w/ PBLK:0x0
[ 112.345199] xen-acpi-processor: ACPI CPU9 w/ PBLK:0x0
[ 112.345208] xen-acpi-processor: ACPI CPU10 w/ PBLK:0x0
[ 112.345216] xen-acpi-processor: ACPI CPU11 w/ PBLK:0x0
[ 112.345225] xen-acpi-processor: ACPI CPU12 w/ PBLK:0x0
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 900 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2012-05-04 8:00 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-25 13:00 Workings/effectiveness of the xen-acpi-processor driver Stefan Bader
2012-04-26 15:50 ` Konrad Rzeszutek Wilk
2012-04-26 16:25 ` Stefan Bader
2012-04-26 17:04 ` Konrad Rzeszutek Wilk
2012-05-06 15:23 ` Pasi Kärkkäinen
2012-05-07 17:33 ` Konrad Rzeszutek Wilk
2012-05-07 17:44 ` Pasi Kärkkäinen
2012-05-01 20:02 ` Konrad Rzeszutek Wilk
2012-05-01 22:35 ` Boris Ostrovsky
2012-05-01 22:54 ` Konrad Rzeszutek Wilk
2012-05-02 0:47 ` Konrad Rzeszutek Wilk
2012-05-02 1:11 ` Boris Ostrovsky
2012-05-02 9:19 ` Jan Beulich
2012-05-02 14:56 ` Stefan Bader
2012-05-02 8:36 ` Stefan Bader
2012-05-02 15:01 ` Stefan Bader
2012-05-02 16:08 ` Konrad Rzeszutek Wilk
2012-05-02 17:06 ` Boris Ostrovsky
2012-05-02 17:14 ` Konrad Rzeszutek Wilk
2012-05-02 21:31 ` Boris Ostrovsky
2012-05-02 21:41 ` Konrad Rzeszutek Wilk
2012-05-02 22:09 ` Boris Ostrovsky
2012-05-03 6:55 ` Stefan Bader
2012-05-03 10:00 ` Stefan Bader
2012-05-03 12:58 ` Stefan Bader
2012-05-03 14:47 ` Stefan Bader
2012-05-03 15:46 ` Konrad Rzeszutek Wilk
2012-05-03 17:02 ` Boris Ostrovsky
2012-05-03 17:08 ` Konrad Rzeszutek Wilk
2012-05-04 8:00 ` Stefan Bader [this message]
2012-05-03 16:14 ` Konrad Rzeszutek Wilk
2012-05-02 21:29 ` Stefan Bader
2012-05-02 8:22 ` Stefan Bader
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA38CA0.3020601@canonical.com \
--to=stefan.bader@canonical.com \
--cc=boris.ostrovsky@amd.com \
--cc=jbeulich@suse.com \
--cc=konrad.wilk@oracle.com \
--cc=konrad@darnok.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.