Re: Can't connect Bluetooth Devices

[Steffen Becker <steffen.becker@tu-ilmenau.de>]

Hello Johan & all the others,

Am 06.05.2012 20:35, schrieb Steffen Becker:
> Hi Johan,
>
> Am 03.05.2012 11:44, schrieb Johan Hedberg:
>> Hi Steffen,
>>
>> On Thu, May 03, 2012, Steffen Becker wrote:
>>>> A linkkey is created during the pairing procedure, just pair your
>>>> devices and you will be done.
>>>> And let only bluetoothd touch the /var/lib/bluetooth
>>>> directory, don't touch there yourself.
>>>>
>>>>     Gustavo
>>> Thanks for your fast reply, but that's exactly what I don't know:
>>> How can I pair my devices?
>> You pair using the CreatePairedDevice D-Bus method that BlueZ provides.
>> There are various front-ends that you can use to call this method. If
>> you've got GNOME installed then a pairing wizard should be just a few
>> mouse clicks away through the Bluetooth icon in the upper right-hand
>> corner. If you've only got the command line you can use e.g. the
>> simple-agent python script (under the test subdirectory):
>>
>>     test/simple-agent hci0<remote address>
>>
>> Btw, is there something that the network plugin (which you can operate
>> using e.g. test/test-network) doesn't provide but pand does? We'll
>> probably remove pand from the source tree along with BlueZ 5.0 so it'd
>> be good to know any deficiencies it has.
>>
>> Johan
>
> Sorry for this late answer and thank you for that hint; but I haven't 
> tried it yet - will do this tomorrow.
>
> To your question:
> There are some special things I want to do using the pand-command 
> (because it worked well the last years with that):
> 1.) Using the "iperf" command to display & compare the data rate of a) 
> a bluetooth1.0-Dongle and b) a bluetooth3.0-Dongle
> 2.) Using the "iperf" command between two bluetooth-devices and at the 
> same time also using the "iperf"-command between two WLAN-devices (2 
> PC's: at each PC one bluetooth-device & one WLAN-Stick) -> With a 
> sniffing tool I want to check the AFH of Bluetooth.
> 3.) Send a "big" (media-)file to show how Bluetooth3.0 uses the 
> "WLAN"-mode.
>
> Is all this possible without pand-connection? If yes - how?
>
> Reagrds,
> Steffen

Do you have any information about how I can handle these 3 activities 
without "pand"-connection?

Regards,
Steffen