From: Jeff Liu <jeff.liu@oracle.com>
To: xfs@oss.sgi.com
Cc: Christoph Hellwig <hch@infradead.org>, Ben Myers <bpm@sgi.com>,
Mark Tinguely <tinguely@sgi.com>,
Chris Mason <chris.mason@oracle.com>
Subject: [PATCH] Introduce SEEK_DATA/SEEK_HOLE support v9
Date: Thu, 10 May 2012 21:29:17 +0800 [thread overview]
Message-ID: <4FABC2AD.2030609@oracle.com> (raw)
Hello,
This is the revised patch according to Mark's comments.
Is it possible to get it to accept if there are no other issues,
so that I can continue to work on the unwritten part based on that.
Thanks,
-Jeff
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
---
fs/xfs/xfs_file.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 142 insertions(+), 1 deletions(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 54a67dd..b6ddc6f 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1007,8 +1007,149 @@ xfs_vm_page_mkwrite(
return block_page_mkwrite(vma, vmf, xfs_get_blocks);
}
+STATIC loff_t
+xfs_seek_data(
+ struct file *file,
+ loff_t start,
+ u32 type)
+{
+ struct inode *inode = file->f_mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_bmbt_irec map[2];
+ int nmap = 2;
+ loff_t uninitialized_var(offset);
+ xfs_fsize_t isize;
+ xfs_fileoff_t fsbno;
+ xfs_filblks_t end;
+ uint lock;
+ int error;
+
+ lock = xfs_ilock_map_shared(ip);
+
+ isize = i_size_read(inode);
+ if (start >= isize) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ fsbno = XFS_B_TO_FSBT(mp, start);
+
+ /*
+ * Try to read extents from the first block indicated
+ * by fsbno to the end block of the file.
+ */
+ end = XFS_B_TO_FSB(mp, isize);
+
+ error = xfs_bmapi_read(ip, fsbno, end - fsbno, map, &nmap,
+ XFS_BMAPI_ENTIRE);
+ if (error)
+ goto out_unlock;
+
+ /*
+ * Treat unwritten extent as data extent since it might
+ * contains dirty data in page cache.
+ */
+ if (map[0].br_startblock != HOLESTARTBLOCK) {
+ offset = max_t(loff_t, start,
+ XFS_FSB_TO_B(mp, map[0].br_startoff));
+ } else {
+ if (nmap == 1) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ offset = max_t(loff_t, start,
+ XFS_FSB_TO_B(mp, map[1].br_startoff));
+ }
+
+ if (offset != file->f_pos)
+ file->f_pos = offset;
+
+out_unlock:
+ xfs_iunlock_map_shared(ip, lock);
+
+ if (error)
+ return -error;
+ return offset;
+}
+
+STATIC loff_t
+xfs_seek_hole(
+ struct file *file,
+ loff_t start,
+ u32 type)
+{
+ struct inode *inode = file->f_mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
+ loff_t uninitialized_var(offset);
+ loff_t holeoff;
+ xfs_fsize_t isize;
+ xfs_fileoff_t fsbno;
+ uint lock;
+ int error;
+
+ if (XFS_FORCED_SHUTDOWN(mp))
+ return -XFS_ERROR(EIO);
+
+ lock = xfs_ilock_map_shared(ip);
+
+ isize = i_size_read(inode);
+ if (start >= isize) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ fsbno = XFS_B_TO_FSBT(mp, start);
+ error = xfs_bmap_first_unused(NULL, ip, 1, &fsbno, XFS_DATA_FORK);
+ if (error)
+ goto out_unlock;
+
+ holeoff = XFS_FSB_TO_B(mp, fsbno);
+ if (holeoff <= start)
+ offset = start;
+ else {
+ /*
+ * xfs_bmap_first_unused() could return a value bigger than
+ * isize if there are no more holes past the supplied offset.
+ */
+ offset = min_t(loff_t, holeoff, isize);
+ }
+
+ if (offset != file->f_pos)
+ file->f_pos = offset;
+
+out_unlock:
+ xfs_iunlock_map_shared(ip, lock);
+
+ if (error)
+ return -error;
+ return offset;
+}
+
+STATIC loff_t
+xfs_file_llseek(
+ struct file *file,
+ loff_t offset,
+ int origin)
+{
+ switch (origin) {
+ case SEEK_END:
+ case SEEK_CUR:
+ case SEEK_SET:
+ return generic_file_llseek(file, offset, origin);
+ case SEEK_DATA:
+ return xfs_seek_data(file, offset, origin);
+ case SEEK_HOLE:
+ return xfs_seek_hole(file, offset, origin);
+ default:
+ return -EINVAL;
+ }
+}
+
const struct file_operations xfs_file_operations = {
- .llseek = generic_file_llseek,
+ .llseek = xfs_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = xfs_file_aio_read,
--
1.7.9
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2012-05-10 13:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 13:29 Jeff Liu [this message]
2012-05-10 19:51 ` [PATCH] Introduce SEEK_DATA/SEEK_HOLE support v9 Mark Tinguely
2012-05-10 20:08 ` Ben Myers
2012-05-10 20:07 ` Mark Tinguely
2012-05-10 20:28 ` Mark Tinguely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FABC2AD.2030609@oracle.com \
--to=jeff.liu@oracle.com \
--cc=bpm@sgi.com \
--cc=chris.mason@oracle.com \
--cc=hch@infradead.org \
--cc=tinguely@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.