Re: em28xx : can work on ARM beagleboard ?

[chrbruno <chrbruno@yahoo.fr>]

Hi,
I'm not sure about the fix (it could break the driver for other em28xx 
cards) but I will try to post a patch for the em28xx problem on ARM

Next, I have encountered the same USB problem you described : USB 
stopping after a long capture (and ethernet stops too)
For this problem, I think a patch is available about the PHY update 
frequency
Have a look to :
http://rcn-ee.homeip.net:81/testing/beagleboard/sprz319-erratum-2.1/
I found it in a thread on the google beagleboard list)
I will try and post the results here

Regards,
Chris

Le 10/05/2012 15:39, Mauro Carvalho Chehab a écrit :
> Em 08-05-2012 15:18, CB escreveu:
>> Hello,
>>
>> I would like to know if someone has already used the em28xx driver on a beagleboard xM
>> (the connected device is a Dazzle DVC 100)
>>
>> I have tried with an Angstrom Narcissus image and a Debian but I still get "select timeouts" and skipped frames with mencoded or the capture.c sample
> Not sure if something changed, but on previous tests I did with USB 2.0 isoc
> and Beagleboard, it seems that it has something broken at its USB driver:
> after some time, it stops working when submitted to a high traffic.
>
> I noticed this behavior not only with USB capture cards, but also when using
> it to sniff traffic, using Google's GoC sniffer[1].
>
> [1] http://beagleboard.org/project/usbsniffer/
>
>> Thanks in advance,
>>
>> Regards,
>> Chris
>>
>>
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>