Re: [PATCH 1/3] iio: documentation: Add out_altvoltage and friends

[Jonathan Cameron <jic23@kernel.org>]

On 5/4/2012 2:31 PM, michael.hennerich@analog.com wrote:
> From: Michael Hennerich<michael.hennerich@analog.com>
>
> Continuous frequency/clock generating devices, such as DDSs or PLLs
> should use out_altvoltage.
>
> Signed-off-by: Michael Hennerich<michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
>   Documentation/ABI/testing/sysfs-bus-iio |   31 +++++++++++++++++++++++++++++++
>   1 files changed, 31 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 2ce4dad..ccd8c84 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -219,6 +219,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
>   What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
> @@ -273,6 +274,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
>   What:		/sys/.../iio:deviceX/in_voltageX_scale_available
>   What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
>   What:		/sys/.../iio:deviceX/out_voltageX_scale_available
> +What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
>   What:		/sys/.../iio:deviceX/in_capacitance_scale_available
>   KernelVersion:	2.635
>   Contact:	linux-iio@vger.kernel.org
> @@ -291,14 +293,19 @@ Description:
>   		gives the 3dB frequency of the filter in Hz.
>
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
>   KernelVersion:	2.6.37
>   Contact:	linux-iio@vger.kernel.org
>   Description:
>   		Raw (unscaled, no bias etc.) output voltage for
>   		channel Y.  The number must always be specified and
>   		unique if the output corresponds to a single channel.
> +		While DAC like devices typically use out_voltage,
> +		a continuous frequency generating device, such as
> +		a DDS or PLL should use out_altvoltage.
>
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
>   KernelVersion:	2.6.37
>   Contact:	linux-iio@vger.kernel.org
>   Description:
> @@ -309,6 +316,8 @@ Description:
>
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
>   KernelVersion:	2.6.38
>   Contact:	linux-iio@vger.kernel.org
>   Description:
> @@ -323,6 +332,8 @@ Description:
>
>   What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
>   What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
> +What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
> +What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
>   KernelVersion:	2.6.38
>   Contact:	linux-iio@vger.kernel.org
>   Description:
> @@ -331,6 +342,8 @@ Description:
>
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
>   What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
>   KernelVersion:	2.6.38
>   Contact:	linux-iio@vger.kernel.org
>   Description:
> @@ -339,6 +352,24 @@ Description:
>   		normal operation. Y may be suppressed if all outputs are
>   		controlled together.
>
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Output frequency for channel Y in Hz. The number must always be
> +		specified and unique if the output corresponds to a single
> +		channel.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
> +KernelVersion:	3.4.0
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Phase in radians of one frequency/clock output Y
> +		(out_altvoltageY) relative to another frequency/clock output
> +		(out_altvoltageZ) of the device X. The number must always be
> +		specified and unique if the output corresponds to a single
> +		channel.
> +
>   What:		/sys/bus/iio/devices/iio:deviceX/events
>   KernelVersion:	2.6.35
>   Contact:	linux-iio@vger.kernel.org