All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bin Zeng <bzeng@microhardcorp.com>
To: Thomas Pedersen <thomas@cozybit.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: MESH only works at 54Mbps link rate or below?
Date: Fri, 11 May 2012 09:09:01 -0600	[thread overview]
Message-ID: <4FAD2B8D.8090104@microhardcorp.com> (raw)
In-Reply-To: <CAG6hwVPanDNoWCK-dA2V3gpz8cJhQ-5oJZLXng0rrUXQngPPww@mail.gmail.com>

Thomas,

Yes, I did like that.
iw phy phy0 interface add mesh0 type mp mesh_id mymesh
iw dev mesh0 set channel 48 HT20
ifconfig mesh0 up

However, if I use iw to set bitrate, something like that "iw mesh0 set 
bitrates legacy-5 54 mcs-5 15". Then use "iw dev mesh0 station dump" to 
check bitrate. It seems like only show 54Mbps or below bitrates. HT mcs 
rate can not be controlled?


Any help appreciate.

Thanks,

Bin





On 05/10/2012 06:20 PM, Thomas Pedersen wrote:
> Hey Bin,
>
> On Thu, May 10, 2012 at 1:56 PM, Bin Zeng<bzeng@microhardcorp.com>  wrote:
>> Hi
>>
>> I created a MESH network by using 802.11n supported cards, however, MESH
>> only works at 54Mbps link rate or below.
>>
>> Can anyone tell me how to active the 802.11n ht mode in mesh?
> Just set the channel type to HT, something like:
>
> iw wlan0 set channel 1 HT20
>
> Before joining the mesh.
>
> Thomas
>
>


  reply	other threads:[~2012-05-11 20:06 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-10 20:56 MESH only works at 54Mbps link rate or below? Bin Zeng
2012-05-11  0:20 ` Thomas Pedersen
2012-05-11 15:09   ` Bin Zeng [this message]
2012-05-11 23:50     ` Thomas Pedersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FAD2B8D.8090104@microhardcorp.com \
    --to=bzeng@microhardcorp.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=thomas@cozybit.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.