From: Thomas Mair <thomas.mair86@googlemail.com>
To: linux-media@vger.kernel.org
Subject: Re: [PATCH 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick
Date: Sat, 12 May 2012 22:47:40 +0200 [thread overview]
Message-ID: <4FAECC6C.6050602@googlemail.com> (raw)
In-Reply-To: <1336846109-30070-6-git-send-email-thomas.mair86@googlemail.com>
The patch contains two small errors that prevent its application. This is the fixed version.
Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com>
---
drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +
drivers/media/dvb/dvb-usb/rtl28xxu.c | 27 ++++++++++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index b0a86e9..95c9c14 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -244,6 +244,7 @@
#define USB_PID_TERRATEC_H7_2 0x10a3
#define USB_PID_TERRATEC_T3 0x10a0
#define USB_PID_TERRATEC_T5 0x10a1
+#define USB_PID_NOXON_DAB_STICK 0x00b3
#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e
#define USB_PID_PINNACLE_PCTV2000E 0x022c
#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228
diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c
index 699da68..bacc783 100644
--- a/drivers/media/dvb/dvb-usb/rtl28xxu.c
+++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c
@@ -29,6 +29,7 @@
#include "mt2060.h"
#include "mxl5005s.h"
#include "fc0012.h"
+#include "fc0013.h"
/* debug */
static int dvb_usb_rtl28xxu_debug;
@@ -388,6 +389,12 @@ static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
.tuner = TUNER_RTL2832_FC0012
};
+static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = {
+ .i2c_addr = 0x10, /* 0x20 */
+ .xtal = 28800000,
+ .if_dvbt = 0,
+ .tuner = TUNER_RTL2832_FC0013
+};
static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
int cmd, int arg)
@@ -553,6 +560,7 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013);
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
+ rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
info("%s: FC0013 tuner found\n", __func__);
goto found;
}
@@ -750,6 +758,14 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
fe->ops.tuner_ops.get_rf_strength;
return 0;
break;
+ case TUNER_RTL2832_FC0013:
+ fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe,
+ &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+
+ /* fc0013 also supports signal strength reading */
+ adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]
+ .fe->ops.tuner_ops.get_rf_strength;
+ return 0;
default:
fe = NULL;
err("unknown tuner=%d", priv->tuner);
@@ -1136,6 +1152,7 @@ enum rtl28xxu_usb_table_entry {
RTL2831U_14AA_0161,
RTL2832U_0CCD_00A9,
RTL2832U_1F4D_B803,
+ RTL2832U_0CCD_00B3,
};
static struct usb_device_id rtl28xxu_table[] = {
@@ -1152,6 +1169,8 @@ static struct usb_device_id rtl28xxu_table[] = {
USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
[RTL2832U_1F4D_B803] = {
USB_DEVICE(USB_VID_GTEK, USB_PID_GTEK)},
+ [RTL2832U_0CCD_00B3] = {
+ USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)},
{} /* terminating entry */
};
@@ -1265,7 +1284,7 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = {
.i2c_algo = &rtl28xxu_i2c_algo,
- .num_device_descs = 2,
+ .num_device_descs = 3,
.devices = {
{
.name = "Terratec Cinergy T Stick Black",
@@ -1279,6 +1298,12 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = {
&rtl28xxu_table[RTL2832U_1F4D_B803],
},
},
+ {
+ .name = "NOXON DAB/DAB+ USB dongle",
+ .warm_ids = {
+ &rtl28xxu_table[RTL2832U_0CCD_00B3],
+ },
+ },
}
},
--
1.7.7.6
next prev parent reply other threads:[~2012-05-12 20:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-12 18:08 [PATCH 0/5] support rtl2832 demodulator Thomas Mair
2012-05-12 18:08 ` [PATCH 1/5] rtl2832 ver 0.3: suport for RTL2832 demodulator revised version Thomas Mair
2012-05-12 22:07 ` poma
2012-05-13 18:53 ` Antti Palosaari
2012-05-13 20:56 ` Thomas Mair
2012-05-14 1:37 ` Antti Palosaari
2012-05-14 1:46 ` Antti Palosaari
2012-05-15 15:41 ` Antti Palosaari
2012-05-16 5:10 ` poma
2012-05-18 19:16 ` Antti Palosaari
2012-05-12 18:08 ` [PATCH 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-12 18:08 ` [PATCH 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-12 18:08 ` [PATCH 4/5] rtl28xxu: support G-Tek Electronics Group Lifeview LV5TDLX DVB-T Thomas Mair
2012-05-12 18:08 ` [PATCH 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-12 20:47 ` Thomas Mair [this message]
2012-05-13 21:18 ` [PATCH] rtl28xxu: removed newlines from info strings Thomas Mair
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FAECC6C.6050602@googlemail.com \
--to=thomas.mair86@googlemail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.