Command line for kernel: 'HOME=/ root=/dev/sda5 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux' Selected kernel: /vmlinux from partition 0 Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kernelELF32 executable Entry 00100000 first 00100000 n 3 Segment 0 load 00100000 size 6549504 mediaptr 0x1000 Segment 1 load 00788000 size 176308 mediaptr 0x640000 Segment 2 load 007b4000 size 144916 mediaptr 0x66c000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0-rc7-32bit+ (deller@p100) (gcc version 4.6.4 20120514 (prerelease) (GCC) ) #1 Mon May 14 23:10:09 CEST 2012 unwind_init: start = 0x10690000, end = 0x106d5190, entries = 17689 FP[0] enabled: Rev 1 Model 15 The 32-bit Kernel has started... bootconsole [ttyB0] enabled Initialized PDC Console for debugging. Determining PDC firmware type: System Map. model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba vers 00000008 CPUID vers 15 rev 8 (0x000001e8) capabilities 0x2 model 9000/778/B160L ic_size 10000 dc_size 10000 it_size 60 DC base 0x0 stride 0x20 count 0x400 loop 0x2 dc_conf = 0x41402000 alias 4 blk 1 line 2 shift 0 wt 0 sh 0 cst 1 hv 0 IC base 0x0 stride 0x20 count 0x400 loop 0x2 ic_conf = 0x41402000 alias 4 blk 1 line 2 shift 0 wt 0 sh 0 cst 1 hv 0 D-TLB conf: sh 3 page 1 cst 1 aid 0 pad1 0 I-TLB conf: sh 3 page 1 cst 1 aid 0 pad1 0 Total Memory: 128 MB LED display at f0190001 registered Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: HOME=/ root=/dev/sda5 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) allocated 262144 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 122460k/131072k available (4405k kernel code, 8612k reserved, 1968k data, 320k init) virtual kernel memory layout: vmalloc : 0x00810000 - 0x0f000000 ( 231 MB) memory : 0x10000000 - 0x18000000 ( 128 MB) .init : 0x10788000 - 0x107d8000 ( 320 kB) .data : 0x1054d6c4 - 0x10739770 (1968 kB) .text : 0x10100000 - 0x1054d6c4 (4405 kB) NR_IRQS:96 Console: colour dummy device 128x48 Calibrating delay loop... 106.39 BogoMIPS (lpj=531968) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio xor: measuring software checksum speed 8regs : 130.800 MB/sec 8regs_prefetch: 130.800 MB/sec 32regs : 198.400 MB/sec 32regs_prefetch: 198.400 MB/sec xor: using function: 32regs_prefetch (198.400 MB/sec) atomic64 test passed NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } 2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a } 3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } 4. Merlin 160 Core FW-SCSI at 0xfff8c000 [8/12] { 4, 0x0, 0x03d, 0x00089 } 5. Merlin 160 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03d, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 6. Merlin 160 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03d, 0x0008c } 7. Merlin 160 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03d, 0x00082 } 8. Merlin 160 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x03d, 0x0008a } 9. Merlin 160 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03d, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 10. Merlin 160 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03d, 0x0007b } 11. Merlin 160 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03d, 0x00084 } 12. Merlin 160 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03d, 0x00084 } 13. Coral SGC Graphics at 0xfa000000 [8/4] { 10, 0x0, 0x004, 0x00077 } 14. Coral SGC Graphics at 0xf4000000 [8/8] { 10, 0x0, 0x004, 0x00077 } 15. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000 16. Merlin L2 160 (9000/778/B160L) at 0xfffbe000 [62] { 0, 0x0, 0x502, 0x00004 } 17. Memory at 0xfffbf000 [63] { 1, 0x0, 0x067, 0x00009 } 18. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } CPU(s): 1 x PA7300LC (PCX-L2) at 160.000000 MHz Setting cache flush threshold to 8a0 (1 CPUs online) Lasi version 0 at 0xffd00000 found. Dino version 3.1 found at 0xfff80000 Dino: No PCI devices enabled. dino 8:0: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] powersw: Soft power switch at 0xf0140000 enabled. bio: create slab at 0 raid6: int32x1 60 MB/s raid6: int32x2 71 MB/s raid6: int32x4 85 MB/s raid6: int32x8 61 MB/s raid6: using algorithm int32x4 (85 MB/s) vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource cr16 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 4, 81920 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 128 (order: 0, 6144 bytes) UDP-Lite hash table entries: 128 (order: 0, 6144 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Enabling PDC chassis warnings support v0.05 Initializing RT-Tester: OK ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! Backtrace: [<10119d14>] dump_stack+0x1c/0x2c [<1017d4ec>] backtrace_regression_test+0x44/0x124 [<10117f48>] do_one_initcall+0x258/0x2b8 [<1078a208>] kernel_init+0x184/0x214 [<1010405c>] ret_from_kernel_thread+0x1c/0x24 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Backtrace: [<10119d14>] dump_stack+0x1c/0x2c [<1017d488>] backtrace_test_irq_callback+0x18/0x38 [<101399d0>] tasklet_action+0x78/0xdc [<10139f64>] __do_softirq+0x130/0x17c [<1013a020>] run_ksoftirqd+0x70/0x124 [<10151484>] kthread+0xac/0xb4 [<1010405c>] ret_from_kernel_thread+0x1c/0x24 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [<10123624>] save_stack_trace+0x28/0x60 [<1017d598>] backtrace_regression_test+0xf0/0x124 [<10117f48>] do_one_initcall+0x258/0x2b8 [<1078a208>] kernel_init+0x184/0x214 [<1010405c>] ret_from_kernel_thread+0x1c/0x24 [] 0xffffffff ====[ end of backtrace testing ]==== VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 239 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) start plist test end plist test PDC Stable Storage facility v0.30 STI GSC/PCI core graphics driver Version 0.9a id 2bcb015a-9a02587, conforms to spec rev. 8.04 graphics card name: HPA4071B id 2d08c0a7-9a02587, conforms to spec rev. 8.07 graphics card name: HPA4450AX1024 id 2d08c0a7-9a02587, conforms to spec rev. 8.07 graphics card name: INTERNAL_EG_X1024 sticon: Initializing STI text console. Console: switching to colour STI console 160x64 Console: switching to colour frame buffer device 160x64 fb0: stifb 1280x1024-32 frame buffer device, HPA4071B, id: 2bcb015a, mmio: 0xfa100000 fb1: stifb 1024x768-8 frame buffer device, HPA4450AX1024, id: 2d08c0a7, mmio: 0xf4100000 fb2: stifb 1024x768-8 frame buffer device, INTERNAL_EG_X1024, id: 2d08c0a7, mmio: 0xf8100000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled 8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 22) is a 16550A Linux agpgart interface v0.103 parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 19 [PCSPP,TRISTATE] parport0: fix this legacy no-device port driver! brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 zalon_probe: Zalon version 1, IRQ 67 ncr53c720-0: rev 0xf irq 67 ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3g scsi 0:0:6:0: Direct-Access SEAGATE ST32171W HP03 PQ: 0 ANSI: 2 scsi target0:0:6: Beginning Domain Validation scsi target0:0:6: asynchronous scsi target0:0:6: wide asynchronous scsi target0:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) scsi target0:0:6: Domain Validation skipping write tests scsi target0:0:6: Ending Domain Validation 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi1: 53c710 rev 2 scsi1 : LASI SCSI 53c700 scsi 1:0:1:0: CD-ROM PHILIPS PCA80SC V3-0 PQ: 0 ANSI: 2 scsi target1:0:1: Beginning Domain Validation scsi target1:0:1: asynchronous scsi target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) scsi target1:0:1: Domain Validation skipping write tests scsi target1:0:1: Ending Domain Validation st: Version 20101219, fixed bufsize 32768, s/g segs 256 sd 0:0:6:0: [sda] 4194685 512-byte logical blocks: (2.14 GB/2.00 GiB) sd 0:0:6:0: [sda] Write Protect is off sr0: scsi-1 drive cdrom: Uniform CD-ROM driver Revision: 3.20 sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:6:0: Attached scsi generic sg0 type 0 sr 1:0:1:0: Attached scsi generic sg1 type 5 LASI 82596 driver - Revision: 1.30 Found i82596 at 0xffd07000, IRQ 18 eth0: 82596 at 0xffd07000, 08:00:09:ef:34:f5 IRQ 18. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver serio: gsc-ps2-keyboard port at 0x0081a000 irq 21 @ 8:16:7 serio: gsc-ps2-mouse port at 0x0081c100 irq 21 @ 8:16:8 sda: sda1 sda2 sda3 < sda5 sda6 > mousedev: PS/2 mouse device common for all mice rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 sd 0:0:6:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using timer interrupt. TCP: cubic registered NET: Registered protocol family 17 rtc-generic rtc-generic: setting system clock to 1987-04-14 10:58:29 UTC (545396309) Sending BOOTP requests . OK IP-Config: Got BOOTP answer from 192.168.178.50, my address is 192.168.178.65 IP-Config: Complete: device=eth0, addr=192.168.178.65, mask=255.255.255.0, gw=192.168.178.1 host=b160, domain=box, nis-domain=(none) bootserver=192.168.178.50, rootserver=192.168.178.50, rootpath= md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:5. Freeing unused kernel memory: 320k freed _______________________________ < Your System ate a SPARC! Gah! > ------------------------------- \ ^__^ (__)\ )\/\ U ||----w | || || swapper (pid 1): Illegal instruction (code 8) YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000000000000000000000000 Not tainted r00-03 00000000 00000001 101bc460 17c246c0 r04-07 00000017 17eaa5f8 17c22db8 ffeffff1 r08-11 0f2ff000 0f000000 00000033 fff00ff1 r12-15 00000000 00000017 00000001 00000000 r16-19 00000000 00000043 00000000 107e8a80 r20-23 17c245c8 108fc000 00000001 00000001 r24-27 00000000 00000000 0000fa80 106e2020 r28-31 0f2ff000 000074ee 17c24740 000072e6 sr00-03 00000000 00000001 00000000 00000000 sr04-07 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 10101110 10101114 IIR: 078112a0 ISR: 00000000 IOR: 0f2ff000 CPU: 0 CR30: 17c24000 CR31: f0102978 ORIG_R28: 17ec4ffc IAOQ[0]: flush_dcache_page_asm+0x28/0x7c IAOQ[1]: flush_dcache_page_asm+0x2c/0x7c RP(r2): __get_user_pages+0x38c/0x3c4 Backtrace: [<101bc460>] __get_user_pages+0x38c/0x3c4 [<101bc580>] get_user_pages+0x50/0x60 [<101e1a1c>] get_arg_page+0x64/0xe8 [<101e1bac>] copy_strings+0x10c/0x248 [<101e1d10>] copy_strings_kernel+0x28/0x44 [<101e360c>] do_execve+0x2a0/0x36c [<10120598>] sys_execve+0x44/0x7c [<10104084>] __execve+0x20/0x34 [<10133d2c>] vprintk+0x1d8/0x4f4 [<10134078>] printk+0x30/0x40 [<10118550>] free_initmem+0x154/0x184 [<10117cbc>] init_post+0xa0/0xd4 [<1078a294>] kernel_init+0x210/0x214 Backtrace: [<10119d14>] dump_stack+0x1c/0x2c [<1011a290>] die_if_kernel+0xc0/0x1c0 [<1011a988>] handle_interruption+0x324/0x6c4 [<10105078>] intr_check_sig+0x0/0x34 [<101d78e0>] mem_cgroup_charge_common+0x50/0x6c [<101bc440>] __get_user_pages+0x36c/0x3c4 [<101bc580>] get_user_pages+0x50/0x60 [<101e1a1c>] get_arg_page+0x64/0xe8 [<101e1bac>] copy_strings+0x10c/0x248 [<101e1d10>] copy_strings_kernel+0x28/0x44 [<101e360c>] do_execve+0x2a0/0x36c [<10120598>] sys_execve+0x44/0x7c [<10104084>] __execve+0x20/0x34 [<10133d2c>] vprintk+0x1d8/0x4f4 [<10134078>] printk+0x30/0x40 [<10118550>] free_initmem+0x154/0x184 ---[ end trace 3da5cee95bb8512d ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b