From mboxrd@z Thu Jan 1 00:00:00 1970 From: ACCART Julien Date: Tue, 15 May 2012 19:20:42 +0000 Subject: Re: [lm-sensors] asus_atk0110 doesn't work on motherboard P8B WS Message-Id: <4FB2AC8A.9060505@free.fr> List-Id: References: <4FAAF8EA.3070202@free.fr> In-Reply-To: <4FAAF8EA.3070202@free.fr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Le 14/05/2012 20:57, Jean Delvare a =E9crit : > On Mon, 14 May 2012 20:44:08 +0200, ACCART Julien wrote: >> The BIOS of this motherboard can display CPU and M/B temp, voltage, fan >> speed. >> Do you think we can use the asus wmi modules to read these data? >> How can I help? > Did you try just running sensors-detect and loading the proper drivers? > Who knows, this may just work. If not, booting with > acpi_enforce_resources=3Dlax might be a workaround if you can live with > the risk. > Yes I did. In kernel 3, loading the w83627ehf fails because of conflicts with ACPI.=20 I tried the acp_enforce_resources=3Dlax but I had freezes. It is useless=20 to have the module loading ability if system freezes So, I'm back to 2.6.39 which lets me load w83627ehf module. I wanted the atk (or wmi) because of two reasons : 1 - w83627ehf doesn't work with kernel 3 and lax acpi resource freezes=20 my system as I said 2 - mesures with atk or wmi are reliable but are messed up with=20 w83627ehf module For example : $ sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +33.0 C (high =3D +82.0 C, crit =3D +102.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +29.0 C (high =3D +82.0 C, crit =3D +102.0 C) nct6776-isa-0290 Adapter: ISA adapter in0: +0.90 V (min =3D +0.00 V, max =3D +1.74 V) in1: +1.00 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in2: +3.38 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in3: +3.38 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in4: +1.01 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in5: +2.04 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in7: +3.41 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in8: +3.33 V (min =3D +0.00 V, max =3D +0.00 V) ALARM fan1: 967 RPM (min =3D 0 RPM) ALARM fan2: 1045 RPM (min =3D 0 RPM) ALARM fan3: 0 RPM (min =3D 0 RPM) ALARM fan4: 1086 RPM (min =3D 0 RPM) ALARM fan5: 0 RPM (min =3D 0 RPM) ALARM SYSTIN: +29.0 C (high =3D +0.0 C, hyst =3D +0.0 C) ALARM sensor = =3D=20 thermistor CPUTIN: +91.5 C (high =3D +58.5 C, hyst =3D +53.5 C) ALARM sensor = =3D=20 thermistor AUXTIN: +26.0 C (high =3D +80.0 C, hyst =3D +75.0 C) sensor =3D the= rmistor PECI Agent 0: +19.5 C cpu0_vid: +2.050 V Coretemp says 30 C while w83627ehf says 91.5. min and max are not set in both temp, voltage and RPM. --=20 Julien _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors