From: Antti Palosaari <crope@iki.fi>
To: Per Wetterberg <dtv00pwg@hotmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: PCTV 520e - DVB-C not working
Date: Thu, 17 May 2012 03:22:58 +0300 [thread overview]
Message-ID: <4FB444E2.4020908@iki.fi> (raw)
In-Reply-To: <4FA8260A.5070601@iki.fi>
On 07.05.2012 22:44, Antti Palosaari wrote:
> On 05.05.2012 15:24, Per Wetterberg wrote:
>>
>> Hi,
>>
>>
>> I have problem getting the PCTV 520e to work with DVB-C on Linux. The
>> video output stream is full of defects.
>> "drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params" is
>> printed to the dmesg log when scanning and watching DVB-C channels.
>> I have no problems scanning and watching DVB-T.
>>
>>
>> On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an
>> hardware problem or the quality of the tv signal.
>>
>>
>> I have tried the drivers that came with kernel 3.3.4 and the latest
>> media drivers built from source.
>> The dvb-demod-drxk-pctv.fw firmware file is downloaded with the
>> get_dvb_firmware script and copied to /lib/firmware.
>>
>>
>> I can't figure out what the problem is.
>> Has anyone got PCTV 520e with DVB-C to work on Linux?
>>
>>
>> I have attached some log outputs below.
>
> You will need attenuator. I suspect it is LNA or some AGC :/ But guess
> what how many times I tried to found out the reason... Feel free to hack
> DRX-K driver.
Problem found. I was LNA which is always enabled. LNA is connected to
the demod GPIO. I will disable it since it since it is now over gaining
strong signals.
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-05-17 0:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BAY154-W29D14F1C862FA852849E80C92D0@phx.gbl>
2012-05-05 12:24 ` PCTV 520e - DVB-C not working Per Wetterberg
2012-05-07 19:44 ` Antti Palosaari
2012-05-17 0:22 ` Antti Palosaari [this message]
2012-05-19 16:09 ` Per Wetterberg
2012-05-19 16:50 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB444E2.4020908@iki.fi \
--to=crope@iki.fi \
--cc=dtv00pwg@hotmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.