From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oliver Seitz Subject: Re: Specific resolution without monitor Date: Thu, 17 May 2012 17:39:07 +0200 Message-ID: <4FB51B9B.8050601@vtnd.de> References: <4FB404A7.40109@cbnco.com> <4FB48B1E.3010807@vtnd.de> <20120517115637.GF723@yuggoth.org> <4FB4FEC4.6060905@cbnco.com> <4FB500C3.6080600@vtnd.de> <4FB516EB.3070303@cbnco.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from srv6.berlinhosting.de (srv6.berlinhosting.de [87.118.86.113]) by gabe.freedesktop.org (Postfix) with ESMTP id 2563C9E738 for ; Thu, 17 May 2012 08:39:09 -0700 (PDT) In-Reply-To: <4FB516EB.3070303@cbnco.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org > I'm using an ASUS Eeebox B202 so I don't have the option of adding a > different video card. I'm not quite sure what you mean by modifying > hardware but replacing the B202 defeats the purpose of trying to use it > in the first place. Are you suggesting I avoid Intel graphics cards for > this type of setup? My preference would be, that the force-parameters would be enabled again. But I have little hope for that. By modifying hardware I meant to change the circuitry inside the monitor, so that EDID data is transmitted, even when the monitor is switched off. By adding hardware I thought of a device to plug between the computer and the monitor which injects "fake" EDID data. Those devices, however, do cost about as much as a cheap monitor. By replacing hardware, I meant to use a (modern) monitor which transmits EDID, even without power connected. Greets, Kiste