All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helge Deller <deller@gmx.de>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John David Anglin <dave.anglin@bell.net>,
	Vincent <vincent.stehle@laposte.net>,
	Rolf Eike Beer <eike-kernel@sf-tec.de>,
	linux-parisc@vger.kernel.org
Subject: Re: Issue booting v2.6.39 .. v3.4-rc6 on hp712/100
Date: Sun, 20 May 2012 21:11:43 +0200	[thread overview]
Message-ID: <4FB941EF.4060304@gmx.de> (raw)
In-Reply-To: <1337508060.2682.13.camel@dabdike.int.hansenpartnership.com>

On 05/20/2012 12:01 PM, James Bottomley wrote:
> On Fri, 2012-05-18 at 23:09 +0200, Helge Deller wrote:
>> James, here is the full kernel log. Does this help?
>
> Yes and no: it shows clearly we got all the way through the initrd, so
> we've gone through the alias region thousands of times doing flushes.
>
>> Kernel Fault: Code=26 regs=8fc30940 (Addr=0f2ff000)
>>
> It's an access rights trap, presumably on the alias tlb, since the
> address is definitely in the alias region.  The obvious candidate is the
> protection id deposit in do_alias
>
> 	depw,z		\prot,8,7,\prot
>
> but that all checks out fine (you can compare it with
> make_insert_tlb_11). So the page should have read, write and dirty set.
>
> The interesting thing is that the only way to get an access rights trap
> in the kernel is if the protection type is zero and I just can't see how
> do_alias would zero out \prot in a way that functions on your C3000
> (PA2.0) but not on the PA1.1 systems.
>
> Are you sure this is booting the same kernel?

Yes, since I use tftboot to deliver same vmlinux kernel to all my machines
for bootup.

Helge

  reply	other threads:[~2012-05-20 19:11 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-08 21:59 Issue booting v2.6.39 .. v3.4-rc6 on hp712/100 Vincent
2012-05-09  6:53 ` Rolf Eike Beer
2012-05-09 15:55   ` John David Anglin
2012-05-09 21:14     ` Vincent
2012-05-09 21:33       ` John David Anglin
2012-05-10  2:03       ` John David Anglin
2012-05-10  6:41         ` Rolf Eike Beer
2012-05-10 16:32           ` John David Anglin
2012-05-10 19:32             ` Rolf Eike Beer
2012-05-11 21:17             ` Vincent
2012-05-13 14:32           ` Jeroen Roovers
2012-05-14  0:52             ` John David Anglin
2012-05-12 22:50         ` Helge Deller
2012-05-13 14:11           ` John David Anglin
2012-05-14  1:10           ` John David Anglin
2012-05-14 22:11             ` Helge Deller
2012-05-14 22:38               ` John David Anglin
2012-05-14 22:55                 ` John David Anglin
2012-05-15  8:09                 ` James Bottomley
2012-05-15  9:13                   ` James Bottomley
2012-05-15 18:23                     ` John David Anglin
2012-05-15 18:50                       ` Helge Deller
2012-05-15 19:24                         ` John David Anglin
2012-05-15 19:46                           ` John David Anglin
2012-05-15 19:59                             ` Helge Deller
2012-05-15 20:05                               ` John David Anglin
2012-05-15 20:28                                 ` Helge Deller
2012-05-15 20:48                                   ` John David Anglin
2012-05-16 14:59                                     ` James Bottomley
2012-05-17 19:26                                     ` Helge Deller
2012-05-17 19:57                                       ` Rolf Eike Beer
2012-05-18  8:12                                       ` James Bottomley
2012-05-18 21:09                                         ` Helge Deller
2012-05-20 10:01                                           ` James Bottomley
2012-05-20 19:11                                             ` Helge Deller [this message]
2012-05-20 20:15                                               ` James Bottomley
2012-05-20 21:09                                                 ` Helge Deller
2012-05-20 21:25                                                   ` John David Anglin
2012-05-21 20:59                                                     ` Helge Deller
2012-05-23  8:47                                                   ` Peter Gantner (nephros)
2012-05-23 23:09                                                     ` John David Anglin
2012-05-15 21:08                                   ` John David Anglin
2012-05-16  7:27                                   ` James Bottomley
2012-05-16  9:27                                     ` James Bottomley
2012-05-16 10:09                                       ` James Bottomley
2012-05-16 10:49                                     ` John David Anglin
2012-05-16 10:57                                       ` James Bottomley
2012-05-16 11:17                                         ` John David Anglin
2012-05-16 11:57                                         ` Rolf Eike Beer
2012-05-16 12:24                                           ` James Bottomley
2012-05-15 19:52                         ` James Bottomley
2012-05-15 19:09                       ` James Bottomley
2012-05-15 21:01                     ` Vincent
2012-05-16 19:07                       ` Helge Deller
2012-05-15  8:06               ` James Bottomley
2012-05-09 21:00   ` Vincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FB941EF.4060304@gmx.de \
    --to=deller@gmx.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=dave.anglin@bell.net \
    --cc=eike-kernel@sf-tec.de \
    --cc=linux-parisc@vger.kernel.org \
    --cc=vincent.stehle@laposte.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.