From: Wei Wang <wei.wang2@amd.com>
To: Jan Beulich <JBeulich@suse.com>
Cc: Keir Fraser <keir@xen.org>, xen-devel <xen-devel@lists.xen.org>
Subject: Re: [PATCH] amd iommu: Add workaround for erratum 732 & 733
Date: Wed, 23 May 2012 11:19:19 +0200 [thread overview]
Message-ID: <4FBCAB97.2000402@amd.com> (raw)
In-Reply-To: <4FBCA65C02000078000855A3@nat28.tlf.novell.com>
On 05/23/2012 08:57 AM, Jan Beulich wrote:
>>>> On 22.05.12 at 17:30, Wei Wang<wei.wang2@amd.com> wrote:
>> Thanks for review it. New version has been attached. It should have
>> fixed issues you mentioned. We don't have a particular number for loop
>> count, so I cut it to 1000, it should be enough. Please have a look.
>
> I adjusted it further to address a few things I noticed while
> pulling it into my local tree. Please let me know if any of the
> adjustments I did are in error.
>
> I'll also send a half-way related (and dependent in terms of
> being able to cleanly apply) follow-on patch in a minute.
Both look great to me. Acked.
Thanks,
Wei
> Jan
>
> **************************************************
>
> amd iommu: Add workaround for erratum 732& 733
>
> Signed-off-by: Wei Wang<wei.wang2@amd.com>
>
> Add missing barriers. Fix early return from parse_ppr_log_entry().
> Slightly adjust comments. Strip trailing blanks.
>
> Signed-off-by: Jan Beulich<jbeulich@suse.com>
>
> --- a/xen/drivers/passthrough/amd/iommu_init.c
> +++ b/xen/drivers/passthrough/amd/iommu_init.c
> @@ -29,6 +29,7 @@
> #include<asm/hvm/svm/amd-iommu-proto.h>
> #include<asm-x86/fixmap.h>
> #include<mach_apic.h>
> +#include<xen/delay.h>
>
> static int __initdata nr_amd_iommus;
>
> @@ -566,6 +567,7 @@ static void parse_event_log_entry(struct
> u16 domain_id, device_id, bdf, cword;
> u32 code;
> u64 *addr;
> + int count = 0;
> char * event_str[] = {"ILLEGAL_DEV_TABLE_ENTRY",
> "IO_PAGE_FAULT",
> "DEV_TABLE_HW_ERROR",
> @@ -578,6 +580,25 @@ static void parse_event_log_entry(struct
> code = get_field_from_reg_u32(entry[1], IOMMU_EVENT_CODE_MASK,
> IOMMU_EVENT_CODE_SHIFT);
>
> + /*
> + * Workaround for erratum 732:
> + * It can happen that the tail pointer is updated before the actual entry
> + * got written. As suggested by RevGuide, we initialize the event log
> + * buffer to all zeros and clear event log entries after processing them.
> + */
> + while ( code == 0 )
> + {
> + if ( unlikely(++count == IOMMU_LOG_ENTRY_TIMEOUT) )
> + {
> + AMD_IOMMU_DEBUG("AMD-Vi: No event written to log\n");
> + return;
> + }
> + udelay(1);
> + rmb();
> + code = get_field_from_reg_u32(entry[1], IOMMU_EVENT_CODE_MASK,
> + IOMMU_EVENT_CODE_SHIFT);
> + }
> +
> if ( (code> IOMMU_EVENT_INVALID_DEV_REQUEST) ||
> (code< IOMMU_EVENT_ILLEGAL_DEV_TABLE_ENTRY) )
> {
> @@ -615,6 +636,8 @@ static void parse_event_log_entry(struct
> AMD_IOMMU_DEBUG("event 0x%08x 0x%08x 0x%08x 0x%08x\n", entry[0],
> entry[1], entry[2], entry[3]);
> }
> +
> + memset(entry, 0, IOMMU_EVENT_LOG_ENTRY_SIZE);
> }
>
> static void iommu_check_event_log(struct amd_iommu *iommu)
> @@ -646,9 +669,31 @@ void parse_ppr_log_entry(struct amd_iomm
> {
>
> u16 device_id;
> - u8 bus, devfn;
> + u8 bus, devfn, code;
> struct pci_dev *pdev;
> - struct domain *d;
> + int count = 0;
> +
> + code = get_field_from_reg_u32(entry[1], IOMMU_PPR_LOG_CODE_MASK,
> + IOMMU_PPR_LOG_CODE_SHIFT);
> +
> + /*
> + * Workaround for erratum 733:
> + * It can happen that the tail pointer is updated before the actual entry
> + * got written. As suggested by RevGuide, we initialize the event log
> + * buffer to all zeros and clear ppr log entries after processing them.
> + */
> + while ( code == 0 )
> + {
> + if ( unlikely(++count == IOMMU_LOG_ENTRY_TIMEOUT) )
> + {
> + AMD_IOMMU_DEBUG("AMD-Vi: No ppr written to log\n");
> + return;
> + }
> + udelay(1);
> + rmb();
> + code = get_field_from_reg_u32(entry[1], IOMMU_PPR_LOG_CODE_MASK,
> + IOMMU_PPR_LOG_CODE_SHIFT);
> + }
>
> /* here device_id is physical value */
> device_id = iommu_get_devid_from_cmd(entry[0]);
> @@ -659,12 +704,10 @@ void parse_ppr_log_entry(struct amd_iomm
> pdev = pci_get_pdev(iommu->seg, bus, devfn);
> spin_unlock(&pcidevs_lock);
>
> - if ( pdev == NULL )
> - return;
> -
> - d = pdev->domain;
> + if ( pdev )
> + guest_iommu_add_ppr_log(pdev->domain, entry);
>
> - guest_iommu_add_ppr_log(d, entry);
> + memset(entry, 0, IOMMU_PPR_LOG_ENTRY_SIZE);
> }
>
> static void iommu_check_ppr_log(struct amd_iommu *iommu)
> --- a/xen/include/asm-x86/hvm/svm/amd-iommu-defs.h
> +++ b/xen/include/asm-x86/hvm/svm/amd-iommu-defs.h
> @@ -301,6 +301,10 @@
> #define IOMMU_PPR_LOG_TAIL_OFFSET 0x2038
> #define IOMMU_PPR_LOG_DEVICE_ID_MASK 0x0000FFFF
> #define IOMMU_PPR_LOG_DEVICE_ID_SHIFT 0
> +#define IOMMU_PPR_LOG_CODE_MASK 0xF0000000
> +#define IOMMU_PPR_LOG_CODE_SHIFT 28
> +
> +#define IOMMU_LOG_ENTRY_TIMEOUT 1000
>
> /* Control Register */
> #define IOMMU_CONTROL_MMIO_OFFSET 0x18
>
>
>
prev parent reply other threads:[~2012-05-23 9:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 13:56 [PATCH] amd iommu: Add workaround for erratum 732 & 733 Wei Wang
2012-05-22 14:10 ` Jan Beulich
2012-05-22 15:30 ` Wei Wang
2012-05-23 6:57 ` Jan Beulich
2012-05-23 9:19 ` Wei Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBCAB97.2000402@amd.com \
--to=wei.wang2@amd.com \
--cc=JBeulich@suse.com \
--cc=keir@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.