Re: [Qemu-devel] [PATCH] ahci: SATA FIS is 20 bytes, not 0x20

[Stefan Weil <sw@weilnetz.de>]

Am 23.05.2012 01:26, schrieb Daniel Verkamp:
> As in the SATA and AHCI specifications, a FIS is 5 Dwords of 4 bytes
> each, which comes to 20 bytes (decimal), not 0x20.
>
> Signed-off-by: Daniel Verkamp<daniel@drv.nu>
> ---
>   hw/ide/ahci.c |    4 ++--
>   1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
> index a883a92..2d7d03d 100644
> --- a/hw/ide/ahci.c
> +++ b/hw/ide/ahci.c
> @@ -462,7 +462,7 @@ static void ahci_check_cmd_bh(void *opaque)
>
>   static void ahci_init_d2h(AHCIDevice *ad)
>   {
> -    uint8_t init_fis[0x20];
> +    uint8_t init_fis[20];
>       IDEState *ide_state =&ad->port.ifs[0];

The current code only uses 14 elements, so 20 elements
still waste some local memory (and 0x20 elements waste
even more).

>
>
>       memset(init_fis, 0, sizeof(init_fis));
> @@ -619,7 +619,7 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
>       d2h_fis[11] = cmd_fis[11];
>       d2h_fis[12] = cmd_fis[12];
>       d2h_fis[13] = cmd_fis[13];
> -    for (i = 14; i<  0x20; i++) {
> +    for (i = 14; i<  20; i++) {
>           d2h_fis[i] = 0;
>       }

I am not sure whether this change is correct.
This code does _not_ access the array which was allocated above:

     d2h_fis = &ad->res_fis[RES_FIS_RFIS];

Regards,
Stefan W.