From: Radu Moisan <radu.moisan@intel.com>
To: openembedded-core@lists.openembedded.org
Subject: Re: [PATCH] curl: Update to version 7.25.0
Date: Thu, 24 May 2012 10:01:20 +0300 [thread overview]
Message-ID: <4FBDDCC0.10904@intel.com> (raw)
In-Reply-To: <4FBDD619.2040509@intel.com>
considering this context, can someone provide more information about
AC_SUBST(GNUTLS_REQUIRED). I'm digging into this issue to check whether
we still need this or not, but additional info would be appreciated.
Radu
On 05/24/2012 09:32 AM, Radu Moisan wrote:
> sorry I should have put a comment about that. that patch is already in
> upstream, that's why I removed it.
>
> Radu
>
> On 05/23/2012 05:12 PM, Saul Wold wrote:
>>
>> Radu,
>>
>> You should explain why you are removing a patch, I see from the Curl
>> archives they picked up a similar patch. I also note that this patch
>> slips in the following:
>> -+AC_SUBST(GNUTLS_REQUIRED)
>>
>> Not sure if you missed that, it might still be needed.
>>
>> Sau!
>>
>> On 05/23/2012 01:20 AM, Radu Moisan wrote:
>>> Signed-off-by: Radu Moisan<radu.moisan@intel.com>
>>> ---
>>> meta/recipes-support/curl/curl/noldlibpath.patch | 76
>>> --------------------
>>> .../curl/{curl_7.24.0.bb => curl_7.25.0.bb} | 5 +-
>>> 2 files changed, 2 insertions(+), 79 deletions(-)
>>> delete mode 100644 meta/recipes-support/curl/curl/noldlibpath.patch
>>> rename meta/recipes-support/curl/{curl_7.24.0.bb =>
>>> curl_7.25.0.bb} (90%)
>>>
>>> diff --git a/meta/recipes-support/curl/curl/noldlibpath.patch
>>> b/meta/recipes-support/curl/curl/noldlibpath.patch
>>> deleted file mode 100644
>>> index f4c72a1..0000000
>>> --- a/meta/recipes-support/curl/curl/noldlibpath.patch
>>> +++ /dev/null
>>> @@ -1,76 +0,0 @@
>>> -Upstream-Status: Inappropriate [embedded specific]
>>> -
>>> -Manipulating LD_LIBRARY_PATH can totally break builds when cross
>>> compiling.
>>> -Since we never run compiled binaries for the target, we should
>>> *never* need
>>> -to change LD_LIBRARY_PATH.
>>> -
>>> -RP 9/6/2010
>>> -
>>> -Index: curl-7.20.0/configure.ac
>>> -===================================================================
>>> ---- curl-7.20.0.orig/configure.ac 2010-06-09 11:06:30.000000000
>>> +0100
>>> -+++ curl-7.20.0/configure.ac 2010-06-09 11:04:25.000000000 +0100
>>> -@@ -1461,9 +1461,10 @@
>>> - dnl linker doesn't search through, we need to add it to
>>> LD_LIBRARY_PATH
>>> - dnl to prevent further configure tests to fail due to this
>>> -
>>> -- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_OPENSSL"
>>> -- export LD_LIBRARY_PATH
>>> -- AC_MSG_NOTICE([Added $LIB_OPENSSL to LD_LIBRARY_PATH])
>>> -+ #LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_OPENSSL"
>>> -+ #export LD_LIBRARY_PATH
>>> -+ #AC_MSG_NOTICE([Added $LIB_OPENSSL to LD_LIBRARY_PATH])
>>> -+ :
>>> - fi
>>> - fi
>>> -
>>> -@@ -1684,9 +1686,10 @@
>>> - dnl LD_LIBRARY_PATH to prevent further configure tests
>>> to fail
>>> - dnl due to this
>>> -
>>> -- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$gtlslib"
>>> -- export LD_LIBRARY_PATH
>>> -- AC_MSG_NOTICE([Added $gtlslib to LD_LIBRARY_PATH])
>>> -+ #LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$gtlslib"
>>> -+ #export LD_LIBRARY_PATH
>>> -+ #AC_MSG_NOTICE([Added $gtlslib to LD_LIBRARY_PATH])
>>> -+ :
>>> - fi
>>> - fi
>>> -
>>> -@@ -1696,6 +1699,8 @@
>>> -
>>> - fi dnl OPENSSL != 1
>>> -
>>> -+AC_SUBST(GNUTLS_REQUIRED)
>>> -+
>>> - dnl ----------------------------------------------------
>>> - dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
>>> - dnl ----------------------------------------------------
>>> -@@ -1781,9 +1786,10 @@
>>> - dnl LD_LIBRARY_PATH to prevent further configure tests to
>>> fail
>>> - dnl due to this
>>> -
>>> -- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
>>> -- export LD_LIBRARY_PATH
>>> -- AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to
>>> LD_LIBRARY_PATH])
>>> -+ #LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
>>> -+ #export LD_LIBRARY_PATH
>>> -+ #AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to
>>> LD_LIBRARY_PATH])
>>> -+ :
>>> - fi
>>> -
>>> - fi
>>> -@@ -1881,9 +1887,9 @@
>>> - dnl libssh2_version is a post 1.0 addition
>>> - AC_CHECK_FUNCS( libssh2_version )
>>> -
>>> -- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
>>> -- export LD_LIBRARY_PATH
>>> -- AC_MSG_NOTICE([Added $DIR_SSH2 to LD_LIBRARY_PATH])
>>> -+ #LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
>>> -+ #export LD_LIBRARY_PATH
>>> -+ #AC_MSG_NOTICE([Added $DIR_SSH2 to LD_LIBRARY_PATH])
>>> - fi
>>> - else
>>> - dnl no libssh2, revert back to clean variables
>>> diff --git a/meta/recipes-support/curl/curl_7.24.0.bb
>>> b/meta/recipes-support/curl/curl_7.25.0.bb
>>> similarity index 90%
>>> rename from meta/recipes-support/curl/curl_7.24.0.bb
>>> rename to meta/recipes-support/curl/curl_7.25.0.bb
>>> index 12e95c9..033f1bc 100644
>>> --- a/meta/recipes-support/curl/curl_7.24.0.bb
>>> +++ b/meta/recipes-support/curl/curl_7.25.0.bb
>>> @@ -11,11 +11,10 @@ DEPENDS_virtclass-nativesdk = "zlib-nativesdk"
>>> PR = "r0"
>>>
>>> SRC_URI = "http://curl.haxx.se/download/curl-${PV}.tar.bz2 \
>>> - file://noldlibpath.patch \
>>> file://pkgconfig_fix.patch"
>>>
>>> -SRC_URI[md5sum] = "f912221d75eb8d8fe08900eaf011b023"
>>> -SRC_URI[sha256sum] =
>>> "ebdb111088ff8b0e05b1d1b075e9f1608285e8105cc51e21caacf33d01812c16"
>>> +SRC_URI[md5sum] = "f0303d47d9d3e6e4f08c2863c6504823"
>>> +SRC_URI[sha256sum] =
>>> "cfb29139dfeb2449bf8a89963c3aed7d87f034013f05564cc0330b435c90b491"
>>>
>>> inherit autotools pkgconfig binconfig
>>>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
next prev parent reply other threads:[~2012-05-24 7:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-23 8:20 [PATCH] curl: Update to version 7.25.0 Radu Moisan
2012-05-23 14:12 ` Saul Wold
2012-05-24 6:32 ` Radu Moisan
2012-05-24 7:01 ` Radu Moisan [this message]
2012-05-24 7:50 ` Khem Raj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBDDCC0.10904@intel.com \
--to=radu.moisan@intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.