From: Hans de Goede <hdegoede@redhat.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org,
halli manjunatha <hallimanju@gmail.com>,
Hans Verkuil <hans.verkuil@cisco.com>
Subject: Re: [RFCv1 PATCH 4/5] videodev2.h: add frequency band information.
Date: Sun, 27 May 2012 20:00:51 +0200 [thread overview]
Message-ID: <4FC26BD3.5080007@redhat.com> (raw)
In-Reply-To: <5b4d3e3600717fb74365814a34a97e8cfefd40f7.1338118975.git.hans.verkuil@cisco.com>
Looks good:
Acked-by: Hans de Goede <hdegoede@redhat.com>
On 05/27/2012 01:50 PM, Hans Verkuil wrote:
> From: Hans Verkuil<hans.verkuil@cisco.com>
>
> Signed-off-by: Hans Verkuil<hans.verkuil@cisco.com>
> ---
> include/linux/videodev2.h | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
> index 2339678..013ee46 100644
> --- a/include/linux/videodev2.h
> +++ b/include/linux/videodev2.h
> @@ -2023,7 +2023,8 @@ struct v4l2_tuner {
> __u32 audmode;
> __s32 signal;
> __s32 afc;
> - __u32 reserved[4];
> + __u32 band;
> + __u32 reserved[3];
> };
>
> struct v4l2_modulator {
> @@ -2033,7 +2034,8 @@ struct v4l2_modulator {
> __u32 rangelow;
> __u32 rangehigh;
> __u32 txsubchans;
> - __u32 reserved[4];
> + __u32 band;
> + __u32 reserved[3];
> };
>
> /* Flags for the 'capability' field */
> @@ -2048,6 +2050,11 @@ struct v4l2_modulator {
> #define V4L2_TUNER_CAP_RDS 0x0080
> #define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100
> #define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200
> +#define V4L2_TUNER_CAP_BAND_FM_EUROPE_US 0x00010000
> +#define V4L2_TUNER_CAP_BAND_FM_JAPAN 0x00020000
> +#define V4L2_TUNER_CAP_BAND_FM_RUSSIAN 0x00040000
> +#define V4L2_TUNER_CAP_BAND_FM_WEATHER 0x00080000
> +#define V4L2_TUNER_CAP_BAND_AM_MW 0x00100000
>
> /* Flags for the 'rxsubchans' field */
> #define V4L2_TUNER_SUB_MONO 0x0001
> @@ -2065,6 +2072,14 @@ struct v4l2_modulator {
> #define V4L2_TUNER_MODE_LANG1 0x0003
> #define V4L2_TUNER_MODE_LANG1_LANG2 0x0004
>
> +/* Values for the 'band' field */
> +#define V4L2_TUNER_BAND_DEFAULT 0
> +#define V4L2_TUNER_BAND_FM_EUROPE_US 1 /* 87.5 Mhz - 108 MHz */
> +#define V4L2_TUNER_BAND_FM_JAPAN 2 /* 76 MHz - 90 MHz */
> +#define V4L2_TUNER_BAND_FM_RUSSIAN 3 /* 65.8 MHz - 74 MHz */
> +#define V4L2_TUNER_BAND_FM_WEATHER 4 /* 162.4 MHz - 162.55 MHz */
> +#define V4L2_TUNER_BAND_AM_MW 5
> +
> struct v4l2_frequency {
> __u32 tuner;
> __u32 type; /* enum v4l2_tuner_type */
next prev parent reply other threads:[~2012-05-27 18:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-27 11:50 [RFCv1 PATCH 0/5] Add hwseek caps and frequency bands Hans Verkuil
2012-05-27 11:50 ` [RFCv1 PATCH 1/5] videodev2.h: add new hwseek capability bits Hans Verkuil
2012-05-27 11:50 ` [RFCv1 PATCH 2/5] v4l2 spec: document the new v4l2_tuner capabilities Hans Verkuil
2012-05-27 17:58 ` Hans de Goede
2012-05-27 11:50 ` [RFCv1 PATCH 3/5] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of EAGAIN Hans Verkuil
2012-05-27 17:59 ` Hans de Goede
2012-05-27 11:50 ` [RFCv1 PATCH 4/5] videodev2.h: add frequency band information Hans Verkuil
2012-05-27 18:00 ` Hans de Goede [this message]
2012-05-27 11:50 ` [RFCv1 PATCH 5/5] V4L2 spec: add frequency band documentation Hans Verkuil
2012-05-27 18:11 ` Hans de Goede
2012-05-27 17:56 ` [RFCv1 PATCH 1/5] videodev2.h: add new hwseek capability bits Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC26BD3.5080007@redhat.com \
--to=hdegoede@redhat.com \
--cc=hallimanju@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.