From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: devicetree-discuss@lists.ozlabs.org, alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Benoit Cousson <b-cousson@ti.com>
Subject: Re: [PATCH v2 4/4] ASoC: omap-abe-twl6040: Add device tree support
Date: Tue, 05 Jun 2012 16:06:01 +0300 [thread overview]
Message-ID: <4FCE0439.8000006@ti.com> (raw)
In-Reply-To: <1337169425-9449-5-git-send-email-peter.ujfalusi@ti.com>
Hi Mark, Liam,
On 05/16/2012 02:57 PM, Peter Ujfalusi wrote:
> When the board boots with device tree the driver will receive the name of the
> card, DAPM routing map, phandle for the audio components described in the dts
> file, mclk speed, and the possibility of detecting the jack detection.
>
> The card will be set up based on this information.
> Since the routing is provided via DT we can mark the card fully routed so
> core can take care of disconnecting the unused pins.
Would you be able to take a look at this patch? The rest of the series has
been already applied for 3.5 but this somehow missed the review.
Thank you,
Péter
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> .../devicetree/bindings/sound/omap-abe-twl6040.txt | 91 ++++++++++++
> sound/soc/omap/omap-abe-twl6040.c | 145 ++++++++++++++++----
> 2 files changed, 206 insertions(+), 30 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
> new file mode 100644
> index 0000000..65dec87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
> @@ -0,0 +1,91 @@
> +* Texas Instruments OMAP4+ and twl6040 based audio setups
> +
> +Required properties:
> +- compatible: "ti,abe-twl6040"
> +- ti,model: Name of the sound card ( for example "SDP4430")
> +- ti,mclk-freq: MCLK frequency for HPPLL operation
> +- ti,mcpdm: phandle for the McPDM node
> +- ti,twl6040: phandle for the twl6040 core node
> +- ti,audio-routing: List of connections between audio components.
> + Each entry is a pair of strings, the first being the connection's sink,
> + the second being the connection's source.
> +
> +Optional properties:
> +- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
> +- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
> + insertion, removal.
> +
> +Available audio endpoints for the audio-routing table:
> +
> +Board connectors:
> + * Headset Stereophone
> + * Earphone Spk
> + * Ext Spk
> + * Line Out
> + * Vibrator
> + * Headset Mic
> + * Main Handset Mic
> + * Sub Handset Mic
> + * Line In
> + * Digital Mic
> +
> +twl6040 pins:
> + * HSOL
> + * HSOR
> + * EP
> + * HFL
> + * HFR
> + * AUXL
> + * AUXR
> + * VIBRAL
> + * VIBRAR
> + * HSMIC
> + * MAINMIC
> + * SUBMIC
> + * AFML
> + * AFMR
> +
> + * Headset Mic Bias
> + * Main Mic Bias
> + * Digital Mic1 Bias
> + * Digital Mic2 Bias
> +
> +Digital mic pins:
> + * DMic
> +
> +Example:
> +
> +sound {
> + compatible = "ti,abe-twl6040";
> + ti,model = "SDP4430";
> +
> + ti,jack-detection = <1>;
> + ti,mclk-freq = <38400000>;
> +
> + ti,mcpdm = <&mcpdm>;
> + ti,dmic = <&dmic>;
> +
> + ti,twl6040 = <&twl6040>;
> +
> + /* Audio routing */
> + ti,audio-routing =
> + "Headset Stereophone", "HSOL",
> + "Headset Stereophone", "HSOR",
> + "Earphone Spk", "EP",
> + "Ext Spk", "HFL",
> + "Ext Spk", "HFR",
> + "Line Out", "AUXL",
> + "Line Out", "AUXR",
> + "Vibrator", "VIBRAL",
> + "Vibrator", "VIBRAR",
> + "HSMIC", "Headset Mic",
> + "Headset Mic", "Headset Mic Bias",
> + "MAINMIC", "Main Handset Mic",
> + "Main Handset Mic", "Main Mic Bias",
> + "SUBMIC", "Sub Handset Mic",
> + "Sub Handset Mic", "Main Mic Bias",
> + "AFML", "Line In",
> + "AFMR", "Line In",
> + "DMic", "Digital Mic",
> + "Digital Mic", "Digital Mic1 Bias";
> +};
> diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c
> index 9d93793..1995a7f 100644
> --- a/sound/soc/omap/omap-abe-twl6040.c
> +++ b/sound/soc/omap/omap-abe-twl6040.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/twl6040.h>
> #include <linux/platform_data/omap-abe-twl6040.h>
> #include <linux/module.h>
> +#include <linux/of.h>
>
> #include <sound/core.h>
> #include <sound/pcm.h>
> @@ -43,6 +44,8 @@
> struct abe_twl6040 {
> int jack_detection; /* board can detect jack events */
> int mclk_freq; /* MCLK frequency speed for twl6040 */
> +
> + struct platform_device *dmic_codec_dev;
> };
>
> static int omap_abe_hw_params(struct snd_pcm_substream *substream,
> @@ -185,17 +188,6 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
> int hs_trim;
> int ret = 0;
>
> - /* Disable not connected paths if not used */
> - twl6040_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
> - twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk");
> - twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk");
> - twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out");
> - twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator");
> - twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_afm, "Line In");
> -
> /*
> * Configure McPDM offset cancellation based on the HSOTRIM value from
> * twl6040.
> @@ -216,6 +208,24 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
> twl6040_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET);
> }
>
> + /*
> + * NULL pdata means we booted with DT. In this case the routing is
> + * provided and the card is fully routed, no need to mark pins.
> + */
> + if (!pdata)
> + return ret;
> +
> + /* Disable not connected paths if not used */
> + twl6040_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
> + twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk");
> + twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk");
> + twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out");
> + twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator");
> + twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_afm, "Line In");
> +
> return ret;
> }
>
> @@ -270,52 +280,116 @@ static struct snd_soc_card omap_abe_card = {
> static __devinit int omap_abe_probe(struct platform_device *pdev)
> {
> struct omap_abe_twl6040_data *pdata = dev_get_platdata(&pdev->dev);
> + struct device_node *node = pdev->dev.of_node;
> struct snd_soc_card *card = &omap_abe_card;
> struct abe_twl6040 *priv;
> int num_links = 0;
> - int ret;
> + int ret = 0;
>
> card->dev = &pdev->dev;
>
> - if (!pdata) {
> - dev_err(&pdev->dev, "Missing pdata\n");
> - return -ENODEV;
> - }
> -
> priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL);
> if (priv == NULL)
> return -ENOMEM;
>
> - if (pdata->card_name) {
> - card->name = pdata->card_name;
> + priv->dmic_codec_dev = ERR_PTR(-EINVAL);
> +
> + if (node) {
> + struct device_node *dai_node;
> +
> + if (snd_soc_of_parse_card_name(card, "ti,model")) {
> + dev_err(&pdev->dev, "Card name is not provided\n");
> + return -ENODEV;
> + }
> +
> + ret = snd_soc_of_parse_audio_routing(card,
> + "ti,audio-routing");
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Error while parsing DAPM routing\n");
> + return -EINVAL;
> + }
> +
> + dai_node = of_parse_phandle(node, "ti,mcpdm", 0);
> + if (!dai_node) {
> + dev_err(&pdev->dev, "McPDM node is not provided\n");
> + return -EINVAL;
> + }
> + abe_twl6040_dai_links[0].cpu_dai_name = NULL;
> + abe_twl6040_dai_links[0].cpu_dai_of_node = dai_node;
> +
> + dai_node = of_parse_phandle(node, "ti,dmic", 0);
> + if (dai_node) {
> + num_links = 2;
> + abe_twl6040_dai_links[1].cpu_dai_name = NULL;
> + abe_twl6040_dai_links[1].cpu_dai_of_node = dai_node;
> +
> + priv->dmic_codec_dev = platform_device_register_simple(
> + "dmic-codec", -1, NULL, 0);
> + if (IS_ERR(priv->dmic_codec_dev)) {
> + dev_err(&pdev->dev,
> + "Can't instantiate dmic-codec\n");
> + return PTR_ERR(priv->dmic_codec_dev);
> + }
> + } else {
> + num_links = 1;
> + }
> +
> + of_property_read_u32(node, "ti,jack-detection",
> + &priv->jack_detection);
> + of_property_read_u32(node, "ti,mclk-freq",
> + &priv->mclk_freq);
> + if (!priv->mclk_freq) {
> + dev_err(&pdev->dev, "MCLK frequency not provided\n");
> + ret = -EINVAL;
> + goto err_unregister;
> + }
> +
> + omap_abe_card.fully_routed = 1;
> + } else if (pdata) {
> + if (pdata->card_name) {
> + card->name = pdata->card_name;
> + } else {
> + dev_err(&pdev->dev, "Card name is not provided\n");
> + return -ENODEV;
> + }
> +
> + if (pdata->has_dmic)
> + num_links = 2;
> + else
> + num_links = 1;
> +
> + priv->jack_detection = pdata->jack_detection;
> + priv->mclk_freq = pdata->mclk_freq;
> } else {
> - dev_err(&pdev->dev, "Card name is not provided\n");
> + dev_err(&pdev->dev, "Missing pdata\n");
> return -ENODEV;
> }
>
> - priv->jack_detection = pdata->jack_detection;
> - priv->mclk_freq = pdata->mclk_freq;
> -
>
> if (!priv->mclk_freq) {
> dev_err(&pdev->dev, "MCLK frequency missing\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto err_unregister;
> }
>
> - if (pdata->has_dmic)
> - num_links = 2;
> - else
> - num_links = 1;
> -
> card->dai_link = abe_twl6040_dai_links;
> card->num_links = num_links;
>
> snd_soc_card_set_drvdata(card, priv);
>
> ret = snd_soc_register_card(card);
> - if (ret)
> + if (ret) {
> dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
> ret);
> + goto err_unregister;
> + }
> +
> + return 0;
> +
> +err_unregister:
> + if (!IS_ERR(priv->dmic_codec_dev))
> + platform_device_unregister(priv->dmic_codec_dev);
>
> return ret;
> }
> @@ -323,17 +397,28 @@ static __devinit int omap_abe_probe(struct platform_device *pdev)
> static int __devexit omap_abe_remove(struct platform_device *pdev)
> {
> struct snd_soc_card *card = platform_get_drvdata(pdev);
> + struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
>
> snd_soc_unregister_card(card);
>
> + if (!IS_ERR(priv->dmic_codec_dev))
> + platform_device_unregister(priv->dmic_codec_dev);
> +
> return 0;
> }
>
> +static const struct of_device_id omap_abe_of_match[] = {
> + {.compatible = "ti,abe-twl6040", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, omap_abe_of_match);
> +
> static struct platform_driver omap_abe_driver = {
> .driver = {
> .name = "omap-abe-twl6040",
> .owner = THIS_MODULE,
> .pm = &snd_soc_pm_ops,
> + .of_match_table = omap_abe_of_match,
> },
> .probe = omap_abe_probe,
> .remove = __devexit_p(omap_abe_remove),
next prev parent reply other threads:[~2012-06-05 13:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 11:57 [PATCH v2 0/4] omap-abe-twl6040: Device tree support Peter Ujfalusi
2012-05-16 11:57 ` [PATCH v2 1/4] ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structure Peter Ujfalusi
2012-05-16 11:57 ` [PATCH v2 2/4] ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm table Peter Ujfalusi
2012-05-16 11:57 ` [PATCH v2 3/4] ASoC: omap-abe-twl6040: Introduce driver data for runtime parameters Peter Ujfalusi
2012-05-16 11:57 ` [PATCH v2 4/4] ASoC: omap-abe-twl6040: Add device tree support Peter Ujfalusi
2012-06-05 13:06 ` Peter Ujfalusi [this message]
2012-06-05 13:10 ` Mark Brown
2012-06-05 12:46 ` [PATCH v2 0/4] omap-abe-twl6040: Device " Peter Ujfalusi
2012-06-05 12:48 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FCE0439.8000006@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.