All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Sébastien Bernard" <sbernard@nerim.net>
To: sparclinux@vger.kernel.org
Subject: Kernel panic on V240 while compiling kernel 3.4.
Date: Tue, 05 Jun 2012 13:52:11 +0000	[thread overview]
Message-ID: <4FCE0F0B.7010903@nerim.net> (raw)

[-- Attachment #1: Type: text/plain, Size: 1962 bytes --]

Hello,
I got today two kernel panic in a row on a 2xV240 with 4go RAM.
Twice the same. This machine is completely headless.
I joined the dmesg log.
Here's the extract :
[ 3844.604607] ERROR(0): Cheetah error trap taken afsr[0010100000000000] 
afar[0000000040000000] TL1(0)
[ 3844.604624] ERROR(0): TPC[407bd0] TNPC[407bd4] O7[448c84] 
TSTATE[411e01602]
[ 3844.604631] ERROR(0): TPC<copy_tsb+0x30/0x80>
[ 3844.604652] ERROR(0): M_SYND(0),  E_SYND(0), Privileged
[ 3844.604661] ERROR(0): Highest priority error (0000100000000000) 
"Unmapped error from system bus"
[ 3844.604671] ERROR(0): D-cache idx[0] tag[0000000000000000] 
utag[0000000000000000] stag[0000000000000000]
[ 3844.604681] ERROR(0): D-cache data0[0000000000000000] 
data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
[ 3844.604692] ERROR(0): I-cache idx[0] tag[0000000000000000] 
utag[0000000000000000] stag[0000000000000000] u[0000000000000000] 
l[0000000000000000]
[ 3844.604703] ERROR(0): I-cache INSN0[0000000000000000] 
INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
[ 3844.604714] ERROR(0): I-cache INSN4[0000000000000000] 
INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
[ 3844.604723] ERROR(0): E-cache idx[40000000] tag[000000001e040efd]
[ 3844.604731] ERROR(0): E-cache data0[00000000000001c0] 
data1[80000003385a0fb2] data2[00000000000001c0] data3[8000000334834fb2]
[ 3844.604743] Kernel panic - not syncing: Irrecoverable deferred error 
trap.
[ 3844.604747]
[ 3844.714568] Call Trace:
[ 3844.746602]  [0000000000428e28] cheetah_deferred_handler+0x32c/0x364
[ 3844.830097]  [0000000000405e50] c_deferred+0x18/0x24
[ 3844.895282]  [0000000000407bd0] copy_tsb+0x30/0x80
[ 3844.958196]  [0000000000793ef8] do_sparc64_fault+0x5a8/0x798
[ 3845.032533]  [00000000004079c8] sparc64_realfault_common+0x10/0x20
[ 3845.113759] Press Stop-A (L1-A) to return to the boot prom

I'll tell if the 3.4 has the same problem or not.



[-- Attachment #2: kernel.panic.v240.050602012 --]
[-- Type: text/plain, Size: 20682 bytes --]

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:45'
[    0.000000] PROMLIB: Root node compatible:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-sparc64-smp (Debian 3.2.19-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Sat Jun 2 02:13:51 UTC 2012
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 00:03:ba:83:a3:0d
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@1e,600000/isa@7/serial@0,3f8
[    0.000000] PROM: Built device tree with 80248 bytes of memory.
[    0.000000] Top of RAM: 0x103feee000, Total RAM: 0xffea2000
[    0.000000] Memory hole size: 62464MB
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/8192
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/8192
[    0.000000] [0000010004000000-fffff80000c00000] page_structs=131072 node=0 entry=16/8192
[    0.000000] [0000010004000000-fffff80001000000] page_structs=131072 node=0 entry=17/8192
[    0.000000] [0000010006000000-fffff80001400000] page_structs=131072 node=0 entry=24/8192
[    0.000000] [0000010006000000-fffff80001800000] page_structs=131072 node=0 entry=25/8192
[    0.000000] [0000010020000000-fffff80001c00000] page_structs=131072 node=0 entry=128/8192
[    0.000000] [0000010020000000-fffff80002000000] page_structs=131072 node=0 entry=129/8192
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0081ff77
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000]     0: 0x00180000 -> 0x001a0000
[    0.000000]     0: 0x00800000 -> 0x0081f7ff
[    0.000000]     0: 0x0081f800 -> 0x0081ff45
[    0.000000]     0: 0x0081ff48 -> 0x0081ff50
[    0.000000]     0: 0x0081ff70 -> 0x0081ff74
[    0.000000]     0: 0x0081ff76 -> 0x0081ff77
[    0.000000] On node 0 totalpages: 524113
[    0.000000]   Normal zone: 66559 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 457554 pages, LIFO batch:15
[    0.000000] Booting Linux...
[    0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[    0.000000] CPU CAPS: [v8plus,vis,vis2]
[    0.000000] PERCPU: Embedded 6 pages/cpu @fffff80002400000 s20096 r8192 d20864 u2097152
[    0.000000] pcpu-alloc: s20096 r8192 d20864 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 457554
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-sparc64-smp root=/dev/mapper/raptor-root ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes)
[    0.000000] Memory: 4136120k available (3656k kernel code, 1568k data, 232k init) [fffff80000000000,000000103feee000]
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[53555555] shift[24]
[    0.000000] clockevent: mult[3126e98] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[   39.876653] Calibrating delay using timer specific routine.. 24.00 BogoMIPS (lpj=48008)
[   39.876665] pid_max: default: 32768 minimum: 301
[   39.876804] Security Framework initialized
[   39.876822] AppArmor: AppArmor disabled by boot time parameter
[   39.876880] Mount-cache hash table entries: 512
[   39.877415] Initializing cgroup subsys cpuacct
[   39.877444] Initializing cgroup subsys memory
[   39.877481] Initializing cgroup subsys devices
[   39.877488] Initializing cgroup subsys freezer
[   39.877494] Initializing cgroup subsys net_cls
[   39.877500] Initializing cgroup subsys blkio
[   39.877524] Initializing cgroup subsys perf_event
[   39.877714] Performance events: Supported PMU type is 'ultra3i'
[   39.879296] CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 6 cycles)
[   39.879343] Brought up 2 CPUs
[   39.879358] Testing NMI watchdog ... OK.
[   39.960160] devtmpfs: initialized
[   39.960783] print_constraints: dummy:
[   39.960976] NET: Registered protocol family 16
[   39.964518] /pci@1f,700000: TOMATILLO PCI Bus Module ver[4:0]
[   39.964529] /pci@1f,700000: PCI IO[7f601000000] MEM[7f700000000]
[   39.966520] PCI: Scanning PBM /pci@1f,700000
[   39.966700] pci 0000:00:02.0: PME# supported from D3hot
[   39.966710] pci 0000:00:02.0: PME# disabled
[   39.966793] pci 0000:00:02.1: PME# supported from D3hot
[   39.966801] pci 0000:00:02.1: PME# disabled
[   39.967075] /pci@1e,600000: TOMATILLO PCI Bus Module ver[4:0]
[   39.967085] /pci@1e,600000: PCI IO[7fe01000000] MEM[7ff00000000]
[   39.969095] PCI: Scanning PBM /pci@1e,600000
[   39.969318] pci 0001:00:06.0: quirk: [io  0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI
[   39.969330] pci 0001:00:06.0: quirk: [io  0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB
[   39.969398] pci 0001:00:0a.0: PME# supported from D3cold
[   39.969407] pci 0001:00:0a.0: PME# disabled
[   39.969900] /pci@1c,600000: TOMATILLO PCI Bus Module ver[4:0]
[   39.969911] /pci@1c,600000: PCI IO[7ce01000000] MEM[7cf00000000]
[   39.971897] PCI: Scanning PBM /pci@1c,600000
[   39.972052] pci 0002:00:02.0: supports D1 D2
[   39.972127] pci 0002:00:02.1: supports D1 D2
[   39.972432] /pci@1d,700000: TOMATILLO PCI Bus Module ver[4:0]
[   39.972442] /pci@1d,700000: PCI IO[7c601000000] MEM[7c700000000]
[   39.974463] PCI: Scanning PBM /pci@1d,700000
[   39.974655] pci 0003:00:02.0: PME# supported from D3hot
[   39.974665] pci 0003:00:02.0: PME# disabled
[   39.974762] pci 0003:00:02.1: PME# supported from D3hot
[   39.974770] pci 0003:00:02.1: PME# disabled
[   39.977137] bio: create slab <bio-0> at 0
[   39.977534] vgaarb: loaded
[   39.978071] /pci@1e,600000/isa@7/rtc@0,70: RTC regs at 0x7fe01000070
[   39.978653] Switching to clocksource stick
[   39.987750] NET: Registered protocol family 2
[   39.987989] IP route cache hash table entries: 131072 (order: 7, 1048576 bytes)
[   39.990713] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[   40.008104] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   40.011359] TCP: Hash tables configured (established 524288 bind 65536)
[   40.011367] TCP reno registered
[   40.011381] UDP hash table entries: 2048 (order: 3, 65536 bytes)
[   40.011601] UDP-Lite hash table entries: 2048 (order: 3, 65536 bytes)
[   40.012141] NET: Registered protocol family 1
[   40.012197] pci 0001:00:07.0: Activating ISA DMA hang workarounds
[   40.012223] PCI: Enabling device: (0001:00:0a.0), cmd 2
[   40.066733] PCI: CLS 64 bytes, default 64
[   40.066896] Unpacking initramfs...
[   40.569105] Freeing initrd memory: 11035k freed
[   40.570008] power: Control reg at 7fe01000800
[   40.570319] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0
[   40.570343] chmc: UltraSPARC-IIIi memory controller at /memory-controller@1,0
[   40.570701] audit: initializing netlink socket (disabled)
[   40.570733] type=2000 audit(0.768:1): initialized
[   40.684458] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   40.685106] VFS: Disk quotas dquot_6.5.2
[   40.685256] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[   40.685473] msgmni has been set to 8099
[   40.685961] alg: No test for stdrng (krng)
[   40.686046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   40.686056] io scheduler noop registered
[   40.686062] io scheduler deadline registered
[   40.686097] io scheduler cfq registered (default)
[   40.687120] f00a7730: ttyS0 at MMIO 0x7fe010003f8 (irq = 15) is a 16550A
[   40.687130] Console: ttyS0 (SU)
[   40.687219] console [ttyS0] enabled
[   40.687367] f00a92b0: ttyS1 at MMIO 0x7fe010002e8 (irq = 15) is a 16550A
[   40.687723] [drm] Initialized drm 1.1.0 20060810
[   40.688982] mousedev: PS/2 mouse device common for all mice
[   40.689552] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[   40.689580] rtc0: no alarms, 114 bytes nvram
[   40.690260] TCP cubic registered
[   40.690365] NET: Registered protocol family 10
[   40.691688] Mobile IPv6
[   40.691697] NET: Registered protocol family 17
[   40.691710] Registering the dns_resolver key type
[   40.691796] registered taskstats version 1
[   40.692170] rtc_cmos rtc_cmos: setting system clock to 2012-06-05 07:58:09 UTC (1338883089)
[   40.692205] Initializing network drop monitor service
[   40.731706] udevd[48]: starting version 175
[   40.894043] tg3.c:v3.121 (November 2, 2011)
[   40.894064] PCI: Enabling device: (0000:00:02.0), cmd 2
[   40.936282] SCSI subsystem initialized
[   40.950617] libata version 3.00 loaded.
[   40.951263] PCI: Enabling device: (0001:00:0d.0), cmd 5
[   40.951899] scsi0 : pata_ali
[   40.952128] scsi1 : pata_ali
[   40.952215] ata1: PATA max UDMA/100 cmd 0x7fe01000900 ctl 0x7fe01000918 bmdma 0x7fe01000920 irq 18
[   40.952225] ata2: PATA max UDMA/100 cmd 0x7fe01000910 ctl 0x7fe01000908 bmdma 0x7fe01000928 irq 18
[   40.982790] usbcore: registered new interface driver usbfs
[   40.982862] usbcore: registered new interface driver hub
[   40.983000] usbcore: registered new device driver usb
[   41.071055] tg3 0000:00:02.0: (unregistered net_device): Cannot get nvram lock, tg3_nvram_init failed
[   41.273100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   41.273764] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   41.273826] ohci_hcd 0001:00:0a.0: OHCI Host Controller
[   41.273913] ohci_hcd 0001:00:0a.0: new USB bus registered, assigned bus number 1
[   41.273985] ohci_hcd 0001:00:0a.0: irq 17, io mem 0x7ff01000000
[   41.330754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[   41.330766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   41.330774] usb usb1: Product: OHCI Host Controller
[   41.330780] usb usb1: Manufacturer: Linux 3.2.0-2-sparc64-smp ohci_hcd
[   41.330787] usb usb1: SerialNumber: 0001:00:0a.0
[   41.331288] hub 1-0:1.0: USB hub found
[   41.331316] hub 1-0:1.0: 2 ports detected
[   41.408958] tg3 0000:00:02.0: eth0: Tigon3 [partno(none) rev 2003] (PCI:66MHz:64-bit) MAC address 00:03:ba:83:a3:0d
[   41.408973] tg3 0000:00:02.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   41.408984] tg3 0000:00:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   41.408993] tg3 0000:00:02.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[   41.409041] PCI: Enabling device: (0000:00:02.1), cmd 2
[   41.579641] tg3 0000:00:02.1: (unregistered net_device): Cannot get nvram lock, tg3_nvram_init failed
[   41.921342] tg3 0000:00:02.1: eth1: Tigon3 [partno(none) rev 2003] (PCI:66MHz:64-bit) MAC address 00:03:ba:83:a3:0e
[   41.921360] tg3 0000:00:02.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   41.921371] tg3 0000:00:02.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   41.921381] tg3 0000:00:02.1: eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
[   41.921449] PCI: Enabling device: (0003:00:02.0), cmd 2
[   41.926593] PCI: Enabling device: (0002:00:02.0), cmd 147
[   41.927209] sym0: <1010-66> rev 0x1 at pci 0002:00:02.0 irq 24
[   41.931816] sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
[   41.972829] sym0: SCSI BUS has been reset.

[   41.976062] sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
[   42.016427] sym1: SCSI BUS has been reset.
[   42.016447] scsi3 : sym-2.2.3
[   42.095966] tg3 0003:00:02.0: (unregistered net_device): Cannot get nvram lock, tg3_nvram_init failed
[   42.434145] tg3 0003:00:02.0: eth2: Tigon3 [partno(none) rev 2003] (PCI:66MHz:64-bit) MAC address 00:03:ba:83:a3:0f
[   42.434158] tg3 0003:00:02.0: eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   42.434169] tg3 0003:00:02.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   42.434179] tg3 0003:00:02.0: eth2: dma_rwctrl[763f0000] dma_mask[32-bit]
[   42.434237] PCI: Enabling device: (0003:00:02.1), cmd 2
[   42.607688] tg3 0003:00:02.1: (unregistered net_device): Cannot get nvram lock, tg3_nvram_init failed
[   42.946059] tg3 0003:00:02.1: eth3: Tigon3 [partno(none) rev 2003] (PCI:66MHz:64-bit) MAC address 00:03:ba:83:a3:10
[   42.946072] tg3 0003:00:02.1: eth3: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   42.946084] tg3 0003:00:02.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   42.946093] tg3 0003:00:02.1: eth3: dma_rwctrl[763f0000] dma_mask[32-bit]
[   42.995354] scsi: waiting for bus probes to complete ...
[   44.983774] scsi 2:0:0:0: Direct-Access     SEAGATE  ST336607LSUN36G  0507 PQ: 0 ANSI: 3
[   44.983799] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[   44.983821] scsi target2:0:0: Beginning Domain Validation
[   44.988707] scsi target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   44.994542] scsi target2:0:0: Ending Domain Validation
[   44.995905] scsi 2:0:1:0: Direct-Access     SEAGATE  ST336607LSUN36G  0507 PQ: 0 ANSI: 3
[   44.995917] scsi target2:0:1: tagged command queuing enabled, command queue depth 16.
[   44.995932] scsi target2:0:1: Beginning Domain Validation
[   45.000772] scsi target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   45.006588] scsi target2:0:1: Ending Domain Validation
[   45.007932] scsi 2:0:2:0: Direct-Access     SEAGATE  ST336607LSUN36G  0507 PQ: 0 ANSI: 3
[   45.007944] scsi target2:0:2: tagged command queuing enabled, command queue depth 16.
[   45.007960] scsi target2:0:2: Beginning Domain Validation
[   45.012812] scsi target2:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   45.018660] scsi target2:0:2: Ending Domain Validation
[   45.020002] scsi 2:0:3:0: Direct-Access     SEAGATE  ST336607LSUN36G  0507 PQ: 0 ANSI: 3
[   45.020014] scsi target2:0:3: tagged command queuing enabled, command queue depth 16.
[   45.020030] scsi target2:0:3: Beginning Domain Validation
[   45.024896] scsi target2:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
[   45.030753] scsi target2:0:3: Ending Domain Validation
[   48.280757] sd 2:0:0:0: [sda] 71132959 512-byte logical blocks: (36.4 GB/33.9 GiB)
[   48.282379] sd 2:0:0:0: [sda] Write Protect is off
[   48.282392] sd 2:0:0:0: [sda] Mode Sense: db 00 10 08
[   48.284615] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   48.288287] sd 2:0:1:0: [sdb] 71132959 512-byte logical blocks: (36.4 GB/33.9 GiB)
[   48.289097] sd 2:0:2:0: [sdc] 71132959 512-byte logical blocks: (36.4 GB/33.9 GiB)
[   48.289154] sd 2:0:3:0: [sdd] 71132959 512-byte logical blocks: (36.4 GB/33.9 GiB)
[   48.289904] sd 2:0:1:0: [sdb] Write Protect is off
[   48.289916] sd 2:0:1:0: [sdb] Mode Sense: db 00 10 08
[   48.290753] sd 2:0:2:0: [sdc] Write Protect is off
[   48.290762] sd 2:0:2:0: [sdc] Mode Sense: db 00 10 08
[   48.290801] sd 2:0:3:0: [sdd] Write Protect is off
[   48.290809] sd 2:0:3:0: [sdd] Mode Sense: db 00 10 08
[   48.292329] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   48.292972] sd 2:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   48.293115] sd 2:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   48.302384]  sda: sda1 sda2 sda3
[   48.307453] sd 2:0:0:0: [sda] Attached SCSI disk
[   48.307557]  sdb: sdb3
[   48.310731]  sdd: sdd3
[   48.310849]  sdc: sdc1 sdc2 sdc3
[   48.315723] sd 2:0:1:0: [sdb] Attached SCSI disk
[   48.315920] sd 2:0:3:0: [sdd] Attached SCSI disk
[   48.317000] sd 2:0:2:0: [sdc] Attached SCSI disk
[   49.511023] device-mapper: uevent: version 1.0.3
[   49.512020] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   50.022523] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   50.943894] udevd[316]: starting version 175
[   52.705859] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   52.810398] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   52.875180] loop: module loaded
[   53.475928] Adding 3592184k swap on /dev/mapper/raptor-swap_1.  Priority:-1 extents:1 across:3592184k 
[   53.878226] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
[   53.898425] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[   53.932915] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   53.974964] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[   56.282944] tg3 0000:00:02.0: eth0: No firmware running
[   56.492089] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.002854] RPC: Registered named UNIX socket transport module.
[   57.002866] RPC: Registered udp transport module.
[   57.002872] RPC: Registered tcp transport module.
[   57.002877] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   57.040644] FS-Cache: Loaded
[   57.079556] FS-Cache: Netfs 'nfs' registered for caching
[   57.094524] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   58.067531] tg3 0000:00:02.0: eth0: Link is up at 100 Mbps, full duplex
[   58.067546] tg3 0000:00:02.0: eth0: Flow control is on for TX and on for RX
[   58.071382] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  956.866068] sched: RT throttling activated
[  958.551117] tg3 0000:00:02.0: BAR 0: set to [mem 0x7f700200000-0x7f7003fffff] (PCI address [0x200000-0x3fffff])
[  958.551137] tg3 0000:00:02.0: BAR 2: set to [mem 0x7f700110000-0x7f70011ffff] (PCI address [0x110000-0x11ffff])
[  960.208248] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  961.847451] tg3 0000:00:02.0: eth0: Link is up at 100 Mbps, full duplex
[  961.847466] tg3 0000:00:02.0: eth0: Flow control is on for TX and on for RX
[  961.851679] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1011.122903] tg3 0000:00:02.0: BAR 0: set to [mem 0x7f700200000-0x7f7003fffff] (PCI address [0x200000-0x3fffff])
[ 1011.122921] tg3 0000:00:02.0: BAR 2: set to [mem 0x7f700110000-0x7f70011ffff] (PCI address [0x110000-0x11ffff])
[ 1012.779480] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1014.334251] tg3 0000:00:02.0: eth0: Link is up at 100 Mbps, full duplex
[ 1014.334267] tg3 0000:00:02.0: eth0: Flow control is on for TX and on for RX
[ 1014.338039] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3844.604607] ERROR(0): Cheetah error trap taken afsr[0010100000000000] afar[0000000040000000] TL1(0)
[ 3844.604624] ERROR(0): TPC[407bd0] TNPC[407bd4] O7[448c84] TSTATE[411e01602]
[ 3844.604631] ERROR(0): TPC<copy_tsb+0x30/0x80>
[ 3844.604652] ERROR(0): M_SYND(0),  E_SYND(0), Privileged
[ 3844.604661] ERROR(0): Highest priority error (0000100000000000) "Unmapped error from system bus"
[ 3844.604671] ERROR(0): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000]
[ 3844.604681] ERROR(0): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
[ 3844.604692] ERROR(0): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[0000000000000000]
[ 3844.604703] ERROR(0): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
[ 3844.604714] ERROR(0): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
[ 3844.604723] ERROR(0): E-cache idx[40000000] tag[000000001e040efd]
[ 3844.604731] ERROR(0): E-cache data0[00000000000001c0] data1[80000003385a0fb2] data2[00000000000001c0] data3[8000000334834fb2]
[ 3844.604743] Kernel panic - not syncing: Irrecoverable deferred error trap.
[ 3844.604747] 
[ 3844.714568] Call Trace:
[ 3844.746602]  [0000000000428e28] cheetah_deferred_handler+0x32c/0x364
[ 3844.830097]  [0000000000405e50] c_deferred+0x18/0x24
[ 3844.895282]  [0000000000407bd0] copy_tsb+0x30/0x80
[ 3844.958196]  [0000000000793ef8] do_sparc64_fault+0x5a8/0x798
[ 3845.032533]  [00000000004079c8] sparc64_realfault_common+0x10/0x20
[ 3845.113759] Press Stop-A (L1-A) to return to the boot prom

                 reply	other threads:[~2012-06-05 13:52 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FCE0F0B.7010903@nerim.net \
    --to=sbernard@nerim.net \
    --cc=sparclinux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.