From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <4FD50168.2060205@piments.com>
Date: Sun, 10 Jun 2012 22:19:52 +0200
From: xenophile <xenophile@piments.com>
MIME-Version: 1.0
References: <4FCD0BD8.70103@laposte.net> <4FCD0C4D.6000004@xenomai.org>
	<4FD4EB23.7080203@laposte.net> <4FD4FF04.2030804@xenomai.org>
In-Reply-To: <4FD4FF04.2030804@xenomai.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai] "illegal instruction",
 then "rt_task_start()" error -38 (on a 486/no fpu)
List-Id: Discussions about the Xenomai project <xenomai.xenomai.org>
List-Unsubscribe: <http://www.xenomai.org/mailman/options/xenomai>,
	<mailto:xenomai-request@xenomai.org?subject=unsubscribe>
List-Archive: <http://www.xenomai.org/pipermail/xenomai>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-request@xenomai.org?subject=help>
List-Subscribe: <http://www.xenomai.org/mailman/listinfo/xenomai>,
	<mailto:xenomai-request@xenomai.org?subject=subscribe>
To: xenomai@xenomai.org

On 06/10/12 22:09, Gilles Chanteperdrix wrote:
>   And
> according to what I read, a cyrix 486SLC runs at frequencies under
> 60MHz, not 300 MHz, which the 96.51 bogomips confirms.

Yes, that sort of bogomips figure does not seem anything near what I 
would expect at 300 MHz.

Maybe you should check your into on clock freq.

;)