All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Daney <ddaney.cavm@gmail.com>
To: Shane McDonald <mcdonald.shane@gmail.com>
Cc: linux-mips@linux-mips.org, ralf@linux-mips.org
Subject: Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
Date: Mon, 11 Jun 2012 09:21:54 -0700	[thread overview]
Message-ID: <4FD61B22.3040407@gmail.com> (raw)
In-Reply-To: <CACoURw4+N8Nk-N81kryXHOg9O_=ntvqv9prOLAZW6KKEYQ9v+A@mail.gmail.com>

On 06/10/2012 09:16 PM, Shane McDonald wrote:
> I've run into a problem in linux-3.5-rc1, and I've tracked it down
> to this patch, MIPS: Move cache setup to setup_arch().,
> commit 6650df3c380e0db558dbfec63ed860402c6afb2a.
>

Are you permitted to describe the problem in any additional detail?

Knowing what type of system is affected and the nature of the problem 
would be useful in trying to arrive at a good solution.

David Daney

> On Mon, May 14, 2012 at 6:04 PM, David Daney<ddaney.cavm@gmail.com>  wrote:
>> From: David Daney<david.daney@cavium.com>
>>
>> commit 97ce2c88f9ad42e3c60a9beb9fca87abf3639faa (jump-label: initialize
>> jump-label subsystem much earlier) breaks MIPS.  The jump_label_init()
>> call was moved before trap_init() which is where we initialize
>> flush_icache_range().
>>
>> In order to be good citizens, we move cache initialization earlier so
>> that we don't jump through a null flush_icache_range function pointer
>> when doing the jump label initialization.
>>
>> Signed-off-by: David Daney<david.daney@cavium.com>
>> ---
>>   arch/mips/include/asm/setup.h |    3 ++-
>>   arch/mips/kernel/setup.c      |    2 ++
>>   arch/mips/kernel/smp.c        |    2 +-
>>   arch/mips/kernel/traps.c      |    9 +++++----
>>   4 files changed, 10 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
>> index 6dce6d8..2560b6b 100644
>> --- a/arch/mips/include/asm/setup.h
>> +++ b/arch/mips/include/asm/setup.h
>> @@ -14,7 +14,8 @@ extern void *set_vi_handler(int n, vi_handler_t addr);
>>
>>   extern void *set_except_vector(int n, void *addr);
>>   extern unsigned long ebase;
>> -extern void per_cpu_trap_init(void);
>> +extern void per_cpu_trap_init(bool);
>> +extern void cpu_cache_init(void);
>>
>>   #endif /* __KERNEL__ */
>>
>> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
>> index c504b21..a53f8ec 100644
>> --- a/arch/mips/kernel/setup.c
>> +++ b/arch/mips/kernel/setup.c
>> @@ -605,6 +605,8 @@ void __init setup_arch(char **cmdline_p)
>>
>>         resource_init();
>>         plat_smp_setup();
>> +
>> +       cpu_cache_init();
>>   }
>>
>>   unsigned long kernelsp[NR_CPUS];
>> diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
>> index ba9376b..dc019a1 100644
>> --- a/arch/mips/kernel/smp.c
>> +++ b/arch/mips/kernel/smp.c
>> @@ -106,7 +106,7 @@ asmlinkage __cpuinit void start_secondary(void)
>>   #endif /* CONFIG_MIPS_MT_SMTC */
>>         cpu_probe();
>>         cpu_report();
>> -       per_cpu_trap_init();
>> +       per_cpu_trap_init(false);
>>         mips_clockevent_init();
>>         mp_ops->init_secondary();
>>
>> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
>> index 2b5675b..0ba66c0 100644
>> --- a/arch/mips/kernel/traps.c
>> +++ b/arch/mips/kernel/traps.c
>> @@ -1538,7 +1538,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
>>         return set_vi_srs_handler(n, addr, 0);
>>   }
>>
>> -extern void cpu_cache_init(void);
>>   extern void tlb_init(void);
>>   extern void flush_tlb_handlers(void);
>>
>> @@ -1565,7 +1564,7 @@ static int __init ulri_disable(char *s)
>>   }
>>   __setup("noulri", ulri_disable);
>>
>> -void __cpuinit per_cpu_trap_init(void)
>> +void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
>>   {
>>         unsigned int cpu = smp_processor_id();
>>         unsigned int status_set = ST0_CU0;
>> @@ -1664,7 +1663,9 @@ void __cpuinit per_cpu_trap_init(void)
>>   #ifdef CONFIG_MIPS_MT_SMTC
>>         if (bootTC) {
>>   #endif /* CONFIG_MIPS_MT_SMTC */
>> -               cpu_cache_init();
>> +               /* Boot CPU's cache setup in setup_arch(). */
>> +               if (!is_boot_cpu)
>> +                       cpu_cache_init();
>>                 tlb_init();
>>   #ifdef CONFIG_MIPS_MT_SMTC
>>         } else if (!secondaryTC) {
>> @@ -1741,7 +1742,7 @@ void __init trap_init(void)
>>
>>         if (board_ebase_setup)
>>                 board_ebase_setup();
>> -       per_cpu_trap_init();
>> +       per_cpu_trap_init(true);
>>
>>         /*
>>          * Copy the generic exception handlers to their final destination.
>> --
>> 1.7.2.3
>
> I'm running a single-CPU, PMC-Sierra RM7035C-based system.
>
> Before applying this patch, cca_setup() in arch/mips/mm/c-r4k.c
> is called before coherency_setup() (called from rk4_cache_init()).
> After applying the patch, it is called afterwards.  Because
> coherency_setup() relies on cca_setup() properly setting the
> variable cca, it won't use the value of cca supplied on the
> kernel command line.
>
> I haven't verified it, but I suspect the same problem will occur
> with the call to setcoherentio(), also in c-r4k.c.
>
> Unfortunately, I don't have the knowledge to formulate a patch
> to this problem, but I wanted to raise the issue.
>
> Shane McDonald
>

  reply	other threads:[~2012-06-11 16:22 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-15  0:04 [PATCH v2 0/5] MIPS: Move cache setup earlier David Daney
2012-05-15  0:04 ` David Daney
2012-05-15  0:04 ` [PATCH v2 1/5] MIPS: Introduce board_cache_error_setup() hook David Daney
2012-05-15  0:04 ` [PATCH v2 2/5] MIPS: Make set_handler() __cpuinit David Daney
2012-05-15 11:10   ` Sergei Shtylyov
2012-05-15  0:04 ` [PATCH v2 3/5] MIPS: Octeon: Use board_cache_error_setup for cache error handler setup David Daney
2012-05-15  0:04 ` [PATCH v2 4/5] MIPS: Use board_cache_error_setup for r4k " David Daney
2012-05-15  0:04 ` [PATCH v2 5/5] MIPS: Move cache setup to setup_arch() David Daney
2012-06-11  4:16   ` Shane McDonald
2012-06-11 16:21     ` David Daney [this message]
2012-06-11 16:39       ` David Daney
2012-06-11 18:32         ` Shane McDonald
2012-06-13 15:44           ` Shane McDonald
2012-06-13 16:29             ` David Daney
2012-06-13 17:08               ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FD61B22.3040407@gmail.com \
    --to=ddaney.cavm@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=mcdonald.shane@gmail.com \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.