[U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg

[Dirk Behme <dirk.behme@de.bosch.com>]

On 12.06.2012 16:50, Vikram Narayanan wrote:
> If in case this is valid according to the latest datasheet, ignore this patch.
 >
> --
> According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has
> bits 4 and 5 read-only and the value is always set as zero.
> So write '0' to these bits instead of writing '1'.

Jason, Fabio: What do you think? You should be the datasheet 'masters' ;)

Best regards

Dirk


> Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
> Cc: Jason Liu <r64343@freescale.com>
> Cc: Dirk Behme <dirk.behme@googlemail.com>
> ---
>  board/freescale/mx6qarm2/imximage.cfg      |    2 +-
>  board/freescale/mx6qsabrelite/imximage.cfg |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
> index ceecbf9..bf941a3 100644
> --- a/board/freescale/mx6qarm2/imximage.cfg
> +++ b/board/freescale/mx6qarm2/imximage.cfg
> @@ -167,7 +167,7 @@ DATA 4 0x020c407c 0x0F0000C3
>  DATA 4 0x020c4080 0x000003FF
>  
>  # enable AXI cache for VDOA/VPU/IPU
> -DATA 4 0x020e0010 0xF00000FF
> +DATA 4 0x020e0010 0xF00000CF
>  # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>  DATA 4 0x020e0018 0x007F007F
>  DATA 4 0x020e001c 0x007F007F
> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg
> index c389427..62498ab 100644
> --- a/board/freescale/mx6qsabrelite/imximage.cfg
> +++ b/board/freescale/mx6qsabrelite/imximage.cfg
> @@ -164,7 +164,7 @@ DATA 4 0x020c407c 0x0F0000C3
>  DATA 4 0x020c4080 0x000003FF
>  
>  # enable AXI cache for VDOA/VPU/IPU
> -DATA 4 0x020e0010 0xF00000FF
> +DATA 4 0x020e0010 0xF00000CF
>  # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
>  DATA 4 0x020e0018 0x007F007F
>  DATA 4 0x020e001c 0x007F007F