From: "Wouter M. Koolen" <W.M.Koolen-Wijkstra@cwi.nl>
To: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>,
"Wouter M. Koolen" <W.M.Koolen-Wijkstra@cwi.nl>,
intergalactic.anonymous@gmail.com, len.brown@intel.com,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
"Barnes, Jesse" <jbarnes@virtuousgeek.org>,
"Wilson, Chris" <chris.wilson@intel.com>
Subject: Re: [3.4 regression] [bisected] DisplayPort fails to come on
Date: Thu, 14 Jun 2012 15:48:16 +0100 [thread overview]
Message-ID: <4FD9F9B0.9030204@cwi.nl> (raw)
In-Reply-To: <CAKMK7uGokt5cW0R+LKXRmE_kecqmnv4Zgy-WiSZA-GPP8htE-A@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1027 bytes --]
On 06/14/2012 03:05 PM, Daniel Vetter wrote:
> Can you please boot with drm.debug=0xe added to your kernel
> cmdline and attach the full dmesg, so we know a bit what your display
> hw looks like?
Please find attached dmesg output with drm.debug=0xe.
3.3.8 is the baseline, on which the display port monitor works fine.
3.4.2.cold is a cold boot into 3.4.2. The monitor on the display port
remains blank. That is, it displays "No Signal Input" and then enters
power saving mode.
3.4.2 is a reboot after running 3.3.8 first. Now the monitor attached to
the display port works too.
The main difference between 3.4.2 and 3.4.2.cold seems to be that a warm
boot reports "clock recovery OK", whereas a cold boot fails trying to
train the link.
I did have a look at the (many) differences between 3.3.8 and 3.4.2, but
I can't see anything that looks important. I will happily leave further
interpretation to you.
I hope this will give someone an idea. In the mean while I will redo the
bisect.
With kind regards,
Wouter
[-- Attachment #2: 3.3.8 --]
[-- Type: text/plain, Size: 83503 bytes --]
Initializing cgroup subsys cpu
Linux version 3.3.8.git (root@wensxps) (gcc version 4.6.3 (Debian 4.6.3-1) ) #42 SMP Wed Jun 6 17:12:38 BST 2012
Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.8.git root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro drm.debug=0xe
KERNEL supported cpus:
Intel GenuineIntel
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable)
BIOS-e820: 00000000bac8f000 - 00000000bade2000 (reserved)
BIOS-e820: 00000000bade2000 - 00000000badea000 (ACPI NVS)
BIOS-e820: 00000000badea000 - 00000000baf1f000 (reserved)
BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023e9ff000 (usable)
BIOS-e820: 000000023e9ff000 - 000000023fe00000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Dell Inc. Dell System XPS L702X/0XN71K, BIOS A17 02/22/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x23e9ff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23FE00000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000bb000000
0000000000 - 00bb000000 page 2M
kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-000000023e9ff000
0100000000 - 023e800000 page 2M
023e800000 - 023e9ff000 page 4k
kernel direct mapping tables up to 23e9ff000 @ bac84000-bac8f000
RAMDISK: 37aec000 - 37d6e000
ACPI: RSDP 00000000000f00e0 00024 (v02 DELL )
ACPI: XSDT 00000000baffe120 0008C (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: FACP 00000000bafef000 000F4 (v03 DELL QA09 00000002 PTL 00000002)
ACPI: DSDT 00000000baff2000 09178 (v02 DELL SNB-CPT 00000000 INTL 20061109)
ACPI: FACS 00000000baf40000 00040
ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)
ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000002 PTL 00000002)
ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000002 PTL 00000002)
ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000002 PTL 00000002)
ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000002 PTL 00000002)
ACPI: SSDT 00000000bafea000 012AD (v01 NvORef NvOptTbl 00001000 INTL 20061109)
ACPI: SSDT 00000000bafe9000 0094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002)
ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000bafe5000 0026A (v01 DELL QA09 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000023e9ff000
Initmem setup node 0 0000000000000000-000000023e9ff000
NODE_DATA [000000023e9fa000 - 000000023e9fefff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236000000-ffff88023cffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023e9ff
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bac8f
0: 0x000bafff -> 0x000bb000
0: 0x00100000 -> 0x0023e9ff
On node 0 totalpages: 2070044
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 746696 pages, LIFO batch:31
Normal zone: 17843 pages used for memmap
Normal zone: 1287244 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bac8f000 - 00000000bade2000
PM: Registered nosave memory: 00000000bade2000 - 00000000badea000
PM: Registered nosave memory: 00000000badea000 - 00000000baf1f000
PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000
PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88023e600000 s77440 r8192 d20864 u262144
pcpu-alloc: s77440 r8192 d20864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037860
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.8.git root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro drm.debug=0xe
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8085788k/9414652k available (4110k kernel code, 1134476k absent, 194388k reserved, 4571k data, 468k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2195.009 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.01 BogoMIPS (lpj=8780036)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20120111
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
Disabled fast string operations
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
Disabled fast string operations
CPU2: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 98000
Disabled fast string operations
CPU3: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 98000
Disabled fast string operations
CPU4: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 98000
Disabled fast string operations
CPU5: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 98000
Disabled fast string operations
CPU6: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
#7 Ok.
smpboot cpu 7: start_ip = 98000
Disabled fast string operations
CPU7: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (35120.14 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bade2000 (32768 bytes)
PM: Registering ACPI NVS region at baf1f000 (524288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000baf10718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000baf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000baf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf2400000-0xf27fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf3c05000-0xf3c0500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf3c0a000-0xf3c0a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf3c00000-0xf3c03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf3c09000-0xf3c093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 24: [mem 0xf3c08000-0xf3c087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf3c04000-0xf3c040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:124d] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf1ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:0091] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xf3b00000-0xf3b01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0xf3a00000-0xf3a01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:0a:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:0a:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:0a:00.0: reg 18: [mem 0xf3004000-0xf3004fff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf3000000-0xf3003fff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
reserve RAM buffer: 000000023e9ff000 - 000000023fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x1003]
pnp 00:04: [io 0x1004-0x1013]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x1003] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs DLL0571 PNP0f13 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed17fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf8000000-0xfbffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed93fff]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfffff000-0xffffffff]
pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [irq 20]
pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:04: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf39fffff]
pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf2ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 2 [mem 0xf3000000-0xf30fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2568k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b6c84000 - ffff8800bac84000
software IO TLB at phys 0xb6c84000 - 0xbac84000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 15797
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: setting latency timer to 64
[drm:intel_opregion_setup], graphic opregion physical addr: 0xbaf27018
[drm:intel_opregion_setup], Public ACPI methods supported
[drm:intel_opregion_setup], SWSCI supported
[drm:intel_opregion_setup], ASLE supported
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_detect_pch], Found CougarPoint PCH
[drm:init_vbt_defaults], Set default to SSC at 100MHz
[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
[drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x8 0xa
[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_detect], VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.PEGP handle
[drm:intel_modeset_init], 2 display pipes available.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_crt_init], pch crt adpa set to 0xf40000
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:i915_get_vblank_timestamp], crtc 0 is disabled
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:i915_get_vblank_timestamp], crtc 1 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:intel_enable_rc6], Sandybridge: RC6 disabled
[drm:init_status_page], render ring hws offset: 0x00000000
[drm:init_status_page], gen6 bsd ring hws offset: 0x00022000
[drm:init_status_page], blt ring hws offset: 0x00043000
[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_setup_crtcs],
[drm:drm_enable_connectors], connector 7 enabled? yes
[drm:drm_enable_connectors], connector 14 enabled? no
[drm:drm_enable_connectors], connector 17 enabled? no
[drm:drm_enable_connectors], connector 20 enabled? yes
[drm:drm_target_preferred], looking for cmdline mode on connector 7
[drm:drm_target_preferred], looking for preferred mode on connector 7
[drm:drm_target_preferred], found mode 1920x1080
[drm:drm_target_preferred], looking for cmdline mode on connector 20
[drm:drm_target_preferred], looking for preferred mode on connector 20
[drm:drm_target_preferred], found mode 1280x1024
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 5
[drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo ffff88023448cc00
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:11:1920x1080]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:22:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
Refined TSC clocksource calibration: 2195.014 MHz.
Switching to clocksource tsc
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], clock recovery OK
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
Console: switching to colour frame buffer device 160x64
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:2f: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input4
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
acpi device:31: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2012-06-14 14:23:26 UTC (1339683806)
Initializing network drop monitor service
Freeing unused kernel memory: 468k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 2012k freed
Freeing unused kernel memory: 744k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
udevd[74]: starting version 175
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (53 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (53 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08380 irq 42
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT50N A101 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[320]: starting version 175
ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 43 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: PC Speaker as /devices/platform/pcspkr/input/input7
iTCO_vendor_support: vendor-support=0
cfg80211: Calling CRDA to update world regulatory domain
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: irq 44 for MSI/MSI-X
r8169 0000:0a:00.0: eth0: RTL8168e/8111e at 0xffffc900057fc000, 84:8f:69:c4:09:63, XID 0c200000 IRQ 44
r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3c0a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.3.8.git ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3c09000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.3.8.git ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: Dell WMI hotkeys as /devices/virtual/input/input8
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057e4000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 19, io mem 0xf3a00000
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
usb usb3: Manufacturer: Linux 3.3.8.git xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.3.8.git xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
Registered led device: phy0-led
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=045e, idProduct=0040
usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 3-1: Manufacturer: Microsoft
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
usb 3-2: new low-speed USB device number 3 using xhci_hcd
hda_codec: ALC665: SKU not ready 0x598301f0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
usb 3-2: New USB device found, idVendor=0a81, idProduct=0205
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: PS2 to USB Converter
usb 3-2: Manufacturer: CHESEN
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input15
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:04:00.0-1/input0
usb 1-1.4: New USB device found, idVendor=0408, idProduct=2fb1
usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
usb 1-1.4: Manufacturer: CN07CN2C7866421A1605A00
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.0/input/input16
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.1/input/input17
generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
uvcvideo: No streaming interface found for terminal 6.
input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Adding 15007740k swap on /dev/sda6. Priority:-1 extents:1 across:15007740k
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
fuse init (API version 7.18)
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:0a:00.0: eth0: link down
r8169 0000:0a:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:i915_getparam], Unknown parameter 17
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_mode_addfb], [FB:25]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:26:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:i915_getparam], Unknown parameter 17
[drm:i915_getparam], Unknown parameter 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
r8169 0000:0a:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:11:1920x1080]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
microcode: CPU4 updated to revision 0x28, date = 2012-04-24
microcode: CPU5 updated to revision 0x28, date = 2012-04-24
microcode: CPU6 updated to revision 0x28, date = 2012-04-24
microcode: CPU7 updated to revision 0x28, date = 2012-04-24
eth0: no IPv6 routers present
wlan0: authenticate with d8:c7:c8:ad:e3:a9 (try 1)
wlan0: authenticate with d8:c7:c8:ad:e3:a9 (try 2)
wlan0: authenticated
wlan0: associate with d8:c7:c8:ad:e3:a9 (try 1)
wlan0: associate with d8:c7:c8:ad:e3:a9 (try 2)
wlan0: RX AssocResp from d8:c7:c8:ad:e3:a9 (capab=0x401 status=0 aid=4)
wlan0: associated
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 1
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 2
wlan0: Wrong control channel in association response: configured center-freq: 5180 hti-cfreq: 5540 hti->control_chan: 108 band: 1. Disabling HT.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 3
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 2
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 1
wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1)
wlan0: authenticated
wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1)
wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2)
wlan0: associated
wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1
wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2
wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 3
[-- Attachment #3: 3.4.2 --]
[-- Type: text/plain, Size: 111506 bytes --]
Initializing cgroup subsys cpu
Linux version 3.4.2.git (root@wensxps) (gcc version 4.6.3 (Debian 4.6.3-1) ) #46 SMP Mon Jun 11 15:44:57 CEST 2012
Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.2.git root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro drm.debug=0xe
KERNEL supported cpus:
Intel GenuineIntel
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable)
BIOS-e820: 00000000bac8f000 - 00000000bade2000 (reserved)
BIOS-e820: 00000000bade2000 - 00000000badea000 (ACPI NVS)
BIOS-e820: 00000000badea000 - 00000000baf1f000 (reserved)
BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023e9ff000 (usable)
BIOS-e820: 000000023e9ff000 - 000000023fe00000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Dell Inc. Dell System XPS L702X/0XN71K, BIOS A17 02/22/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x23e9ff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23FE00000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000bb000000
0000000000 - 00bb000000 page 2M
kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-000000023e9ff000
0100000000 - 023e800000 page 2M
023e800000 - 023e9ff000 page 4k
kernel direct mapping tables up to 23e9ff000 @ bac84000-bac8f000
RAMDISK: 37adc000 - 37d66000
ACPI: RSDP 00000000000f00e0 00024 (v02 DELL )
ACPI: XSDT 00000000baffe120 0008C (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: FACP 00000000bafef000 000F4 (v03 DELL QA09 00000002 PTL 00000002)
ACPI: DSDT 00000000baff2000 09178 (v02 DELL SNB-CPT 00000000 INTL 20061109)
ACPI: FACS 00000000baf40000 00040
ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)
ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000002 PTL 00000002)
ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000002 PTL 00000002)
ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000002 PTL 00000002)
ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000002 PTL 00000002)
ACPI: SSDT 00000000bafea000 012AD (v01 NvORef NvOptTbl 00001000 INTL 20061109)
ACPI: SSDT 00000000bafe9000 0094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002)
ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000bafe5000 0026A (v01 DELL QA09 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000023e9ff000
Initmem setup node 0 0000000000000000-000000023e9ff000
NODE_DATA [000000023e9fb000 - 000000023e9fefff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236000000-ffff88023cffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023e9ff
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bac8f
0: 0x000bafff -> 0x000bb000
0: 0x00100000 -> 0x0023e9ff
On node 0 totalpages: 2070044
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 746696 pages, LIFO batch:31
Normal zone: 17843 pages used for memmap
Normal zone: 1287244 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bac8f000 - 00000000bade2000
PM: Registered nosave memory: 00000000bade2000 - 00000000badea000
PM: Registered nosave memory: 00000000badea000 - 00000000baf1f000
PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000
PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88023e600000 s78016 r8192 d24384 u262144
pcpu-alloc: s78016 r8192 d24384 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037860
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.2.git root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro drm.debug=0xe
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8085692k/9414652k available (4137k kernel code, 1134476k absent, 194484k reserved, 4574k data, 472k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.857 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.71 BogoMIPS (lpj=8779428)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Disabled fast string operations
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#2
Disabled fast string operations
CPU2: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#3
Disabled fast string operations
CPU3: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#4
Disabled fast string operations
CPU4: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#5
Disabled fast string operations
CPU5: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#6
Disabled fast string operations
CPU6: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#7 Ok.
Disabled fast string operations
CPU7: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (35117.71 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbade2000-0xbade9fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000baf10718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000baf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000baf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf2400000-0xf27fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf3c05000-0xf3c0500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf3c0a000-0xf3c0a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3c00000-0xf3c03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf3c09000-0xf3c093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 24: [mem 0xf3c08000-0xf3c087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3c04000-0xf3c040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:124d] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf1ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:0091] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf3b00000-0xf3b01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf3a00000-0xf3a01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:0a:00.0: reg 18: [mem 0xf3004000-0xf3004fff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf3000000-0xf3003fff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
reserve RAM buffer: 000000023e9ff000 - 000000023fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x1003]
pnp 00:04: [io 0x1004-0x1013]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x1003] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs DLL0571 PNP0f13 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed17fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf8000000-0xfbffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed93fff]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfffff000-0xffffffff]
pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [irq 20]
pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:04: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf39fffff]
pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf2ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 2 [mem 0xf3000000-0xf30fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2600k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b6c84000 - ffff8800bac84000
software IO TLB at phys 0xb6c84000 - 0xbac84000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 15797
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: setting latency timer to 64
[drm:intel_opregion_setup], graphic opregion physical addr: 0xbaf27018
[drm:intel_opregion_setup], Public ACPI methods supported
[drm:intel_opregion_setup], SWSCI supported
[drm:intel_opregion_setup], ASLE supported
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_detect_pch], Found CougarPoint PCH
[drm:init_vbt_defaults], Set default to SSC at 100MHz
[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
[drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x8 0xa
[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_detect], VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.PEGP handle
[drm:intel_modeset_init], 2 display pipes available.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_crt_init], pch crt adpa set to 0xf40000
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:i915_get_vblank_timestamp], crtc 0 is disabled
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:i915_get_vblank_timestamp], crtc 1 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm:init_status_page], render ring hws offset: 0x00000000
[drm:init_status_page], gen6 bsd ring hws offset: 0x00022000
[drm:init_status_page], blt ring hws offset: 0x00043000
[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_setup_crtcs],
[drm:drm_enable_connectors], connector 7 enabled? yes
[drm:drm_enable_connectors], connector 14 enabled? no
[drm:drm_enable_connectors], connector 17 enabled? no
[drm:drm_enable_connectors], connector 20 enabled? yes
[drm:drm_target_preferred], looking for cmdline mode on connector 7
[drm:drm_target_preferred], looking for preferred mode on connector 7
[drm:drm_target_preferred], found mode 1920x1080
[drm:drm_target_preferred], looking for cmdline mode on connector 20
[drm:drm_target_preferred], looking for preferred mode on connector 20
[drm:drm_target_preferred], found mode 1280x1024
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 5
[drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo ffff88023466ec00
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:11:1920x1080]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:22:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
Refined TSC clocksource calibration: 2195.013 MHz.
Switching to clocksource tsc
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], clock recovery OK
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
Console: switching to colour frame buffer device 160x64
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:2f: registered as cooling_device0
video: probe of LNXVIDEO:00 failed with error -5
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
acpi device:31: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2012-06-14 14:24:26 UTC (1339683866)
Initializing network drop monitor service
Freeing unused kernel memory: 472k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1988k freed
Freeing unused kernel memory: 728k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
udevd[75]: starting version 175
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (55 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (55 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08380 irq 42
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT50N A101 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[327]: starting version 175
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
mei: module is from the staging directory, the quality is unknown, you have been warned.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 43 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI: Requesting acpi_cpufreq
iTCO_vendor_support: vendor-support=0
wmi: Mapper loaded
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: irq 44 for MSI/MSI-X
r8169 0000:0a:00.0: eth0: RTL8168e/8111e at 0xffffc900057b6000, 84:8f:69:c4:09:63, XID 0c200000 IRQ 44
r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3c0a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.2.git ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3c09000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
ACPI: AC Adapter [ADP0] (on-line)
usb usb2: Manufacturer: Linux 3.4.2.git ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Battery Slot [BAT0] (battery present)
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 19, io mem 0xf3a00000
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.2.git xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.2.git xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: Dell WMI hotkeys as /devices/virtual/input/input7
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057e4000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 54 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci_hcd
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Registered led device: phy0-led
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=045e, idProduct=0040
usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 3-1: Manufacturer: Microsoft
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
hda_codec: ALC665: SKU not ready 0x598301f0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
usb 3-2: new low-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=0a81, idProduct=0205
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: PS2 to USB Converter
usb 3-2: Manufacturer: CHESEN
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=0408, idProduct=2fb1
usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
usb 1-1.4: Manufacturer: CN07CN2C7866421A1605A00
Linux media interface: v0.10
usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
Linux video capture interface: v2.00
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input14
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:04:00.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.0/input/input15
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.1/input/input16
generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
uvcvideo: No streaming interface found for terminal 6.
input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Adding 15007740k swap on /dev/sda6. Priority:-1 extents:1 across:15007740k
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
fuse init (API version 7.18)
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:0a:00.0: eth0: link down
r8169 0000:0a:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
NOHZ: local_softirq_pending 08
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_mode_addfb], [FB:25]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:26:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
r8169 0000:0a:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
microcode: CPU4 updated to revision 0x28, date = 2012-04-24
microcode: CPU5 updated to revision 0x28, date = 2012-04-24
microcode: CPU6 updated to revision 0x28, date = 2012-04-24
microcode: CPU7 updated to revision 0x28, date = 2012-04-24
eth0: no IPv6 routers present
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_addfb], [FB:26]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0125F000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0125F000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0125F000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:25:]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_addfb], [FB:25]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01A5F000 00000000 0 0 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01A5F000 00000000 0 0 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (1920 56)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_dp_link_down],
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:pch_irq_handler], PCH HDCP audio interrupt
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 01A5F000 000B0E00 1920 56 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:26:]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], clock recovery OK
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on
[drm:i915_hotplug_work_func], running encoder hotplug functions
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
wlan0: authenticate with d8:c7:c8:ad:e3:a9
wlan0: send auth to d8:c7:c8:ad:e3:a9 (try 1/3)
wlan0: send auth to d8:c7:c8:ad:e3:a9 (try 2/3)
wlan0: authenticated
wlan0: associate with d8:c7:c8:ad:e3:a9 (try 1/3)
wlan0: RX AssocResp from d8:c7:c8:ad:e3:a9 (capab=0x401 status=0 aid=4)
wlan0: associated
wlan0: Wrong control channel in association response: configured center-freq: 5180 hti-cfreq: 5540 hti->control_chan: 108 band: 1. Disabling HT.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with d8:c7:c8:ad:e3:a1
wlan0: send auth to d8:c7:c8:ad:e3:a1 (try 1/3)
wlan0: authenticated
wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1/3)
wlan0: RX AssocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2)
wlan0: associated
wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
wlan0: no IPv6 routers present
[drm:i915_driver_open],
[drm:i915_driver_open],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[-- Attachment #4: 3.4.2.cold --]
[-- Type: text/plain, Size: 125238 bytes --]
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.2.git root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro drm.debug=0xe
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8085692k/9414652k available (4137k kernel code, 1134476k absent, 194484k reserved, 4574k data, 472k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2195.025 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.05 BogoMIPS (lpj=8780100)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Disabled fast string operations
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#2
Disabled fast string operations
CPU2: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#3
Disabled fast string operations
CPU3: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#4
Disabled fast string operations
CPU4: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#5
Disabled fast string operations
CPU5: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#6
Disabled fast string operations
CPU6: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
#7 Ok.
Disabled fast string operations
CPU7: Thermal monitoring handled by SMI
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (35120.40 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbade2000-0xbade9fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000baf10718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000baf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000baf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf2400000-0xf27fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf3c05000-0xf3c0500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf3c0a000-0xf3c0a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3c00000-0xf3c03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf3c09000-0xf3c093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 24: [mem 0xf3c08000-0xf3c087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3c04000-0xf3c040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:124d] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf1ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:0091] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf3b00000-0xf3b01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf3a00000-0xf3a01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:0a:00.0: reg 18: [mem 0xf3004000-0xf3004fff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf3000000-0xf3003fff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
reserve RAM buffer: 000000023e9ff000 - 000000023fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x1003]
pnp 00:04: [io 0x1004-0x1013]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x1003] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs DLL0571 PNP0f13 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed17fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf8000000-0xfbffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed93fff]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfffff000-0xffffffff]
pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [irq 20]
pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:04: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf39fffff]
pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf2ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 2 [mem 0xf3000000-0xf30fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2600k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b6c84000 - ffff8800bac84000
software IO TLB at phys 0xb6c84000 - 0xbac84000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 15797
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: setting latency timer to 64
[drm:intel_opregion_setup], graphic opregion physical addr: 0xbaf27018
[drm:intel_opregion_setup], Public ACPI methods supported
[drm:intel_opregion_setup], SWSCI supported
[drm:intel_opregion_setup], ASLE supported
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_detect_pch], Found CougarPoint PCH
[drm:init_vbt_defaults], Set default to SSC at 100MHz
[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
[drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x8 0xa
[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[drm:intel_dsm_detect], VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.PEGP handle
[drm:intel_modeset_init], 2 display pipes available.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_get_backlight], get backlight PWM = 4648
[drm:intel_crt_init], pch crt adpa set to 0xf40000
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:i915_get_vblank_timestamp], crtc 0 is disabled
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:i915_get_vblank_timestamp], crtc 1 is disabled
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[drm:intel_update_fbc],
[drm:intel_update_fbc], no output, disabling
[drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm:init_status_page], render ring hws offset: 0x00000000
[drm:init_status_page], gen6 bsd ring hws offset: 0x00022000
[drm:init_status_page], blt ring hws offset: 0x00043000
[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_setup_crtcs],
[drm:drm_enable_connectors], connector 7 enabled? yes
[drm:drm_enable_connectors], connector 14 enabled? no
[drm:drm_enable_connectors], connector 17 enabled? no
[drm:drm_enable_connectors], connector 20 enabled? yes
[drm:drm_target_preferred], looking for cmdline mode on connector 7
[drm:drm_target_preferred], looking for preferred mode on connector 7
[drm:drm_target_preferred], found mode 1920x1080
[drm:drm_target_preferred], looking for cmdline mode on connector 20
[drm:drm_target_preferred], looking for preferred mode on connector 20
[drm:drm_target_preferred], found mode 1280x1024
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 5
[drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo ffff88023466ec00
fbcon: inteldrmfb (fb0) is primary device
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:11:1920x1080]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[drm:ironlake_check_srwm], watermark 3: display plane 99, fbc lines 3, cursor 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], fbc set to per-chip default
[drm:intel_update_fbc], fbc disabled per module param
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:22:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
Refined TSC clocksource calibration: 2195.013 MHz.
Switching to clocksource tsc
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[drm:intel_dp_link_down],
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
Console: switching to colour frame buffer device 160x64
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:2f: registered as cooling_device0
video: probe of LNXVIDEO:00 failed with error -5
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
acpi device:31: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2012-06-14 14:31:22 UTC (1339684282)
Initializing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Freeing unused kernel memory: 472k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1988k freed
Freeing unused kernel memory: 728k freed
udevd[80]: starting version 175
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (44 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (44 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08380 irq 42
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT50N A101 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
udevd[330]: starting version 175
input: PC Speaker as /devices/platform/pcspkr/input/input6
mei: module is from the staging directory, the quality is unknown, you have been warned.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 43 for MSI/MSI-X
ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
wmi: Mapper loaded
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: irq 45 for MSI/MSI-X
r8169 0000:0a:00.0: eth0: RTL8168e/8111e at 0xffffc900057ac000, 84:8f:69:c4:09:63, XID 0c200000 IRQ 45
r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI: Requesting acpi_cpufreq
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057b8000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
usbcore: registered new interface driver usbfs
iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.0: irq 19, io mem 0xf3a00000
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.2.git xhci_hcd
usb usb1: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.2.git xhci_hcd
usb usb2: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
input: Dell WMI hotkeys as /devices/virtual/input/input7
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Registered led device: phy0-led
hda_codec: ALC665: SKU not ready 0x598301f0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3c0a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.2.git ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3c09000
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
usb 1-1: new low-speed USB device number 2 using xhci_hcd
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.2.git ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: New USB device found, idVendor=045e, idProduct=0040
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-1: Manufacturer: Microsoft
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2: new low-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=0a81, idProduct=0205
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: PS2 to USB Converter
usb 1-2: Manufacturer: CHESEN
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: new high-speed USB device number 2 using ehci_hcd
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 4-1: new high-speed USB device number 2 using ehci_hcd
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-1/1-1:1.0/input/input14
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:04:00.0-1/input0
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.0/input/input15
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.1/input/input16
generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-1.4: new high-speed USB device number 3 using ehci_hcd
usb 3-1.4: New USB device found, idVendor=0408, idProduct=2fb1
usb 3-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 3-1.4: Product: Laptop_Integrated_Webcam_2HDM
usb 3-1.4: Manufacturer: CN07CN2C7866421A1605A00
Linux media interface: v0.10
Linux video capture interface: v2.00
usb 4-1.5: new full-speed USB device number 3 using ehci_hcd
usb 4-1.5: New USB device found, idVendor=8086, idProduct=0189
usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
uvcvideo: No streaming interface found for terminal 6.
input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Adding 15007740k swap on /dev/sda6. Priority:-1 extents:1 across:15007740k
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
fuse init (API version 7.18)
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:0a:00.0: eth0: link down
r8169 0000:0a:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:24] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:i915_driver_open],
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_mode_addfb], [FB:25]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:26:1280x1024]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 0084D000 00000000 0 0 5120
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:0a:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
eth0: no IPv6 routers present
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
microcode: CPU4 updated to revision 0x28, date = 2012-04-24
microcode: CPU5 updated to revision 0x28, date = 2012-04-24
microcode: CPU6 updated to revision 0x28, date = 2012-04-24
microcode: CPU7 updated to revision 0x28, date = 2012-04-24
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_addfb], [FB:26]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01263000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01263000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm:drm_crtc_helper_set_mode], [CRTC:3]
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[drm:ironlake_crtc_mode_set], Mode for pipe 0:
[drm:drm_mode_debug_printmodeline], Modeline 25:"" 0 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x0 0xa
[drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 01263000 00000000 0 0 7680
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:8:LVDS-8] set [MODE:25:]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] set DPMS on
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_addfb], [FB:25]
[drm:drm_mode_setcrtc], [CRTC:3]
[drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01A63000 00000000 0 0 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:ironlake_update_plane], Writing base 01A63000 00000000 0 0 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:drm_mode_setcrtc], [CRTC:5]
[drm:drm_mode_setcrtc], [CONNECTOR:20:DP-1]
[drm:drm_crtc_helper_set_config],
[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (1920 56)
[drm:drm_crtc_helper_set_config], modes are different, full mode set
[drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:drm_crtc_helper_set_config], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] to [CRTC:5]
[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
[drm:drm_crtc_helper_set_mode], [CRTC:5]
[drm:intel_dp_link_down],
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
[drm:ironlake_crtc_mode_set], Mode for pipe 1:
[drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x0 0x5
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:ironlake_update_plane], Writing base 01A63000 000B0E00 1920 56 12800
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:drm_crtc_helper_set_mode], [ENCODER:21:TMDS-21] set [MODE:26:]
[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:intel_wait_for_vblank], vblank wait timed out
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[drm:gen6_fdi_link_train], FDI train 1 done.
[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[drm:gen6_fdi_link_train], FDI train 2 done.
[drm:gen6_fdi_link_train], FDI train done.
[drm:intel_update_fbc],
[drm:intel_update_fbc], more than one pipe active, disabling compression
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 02000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 04000000
[drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000
[drm:intel_dp_start_link_train], too many full retries, give up
[drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[drm:intel_dp_link_down],
[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[drm:drm_crtc_helper_set_config], [CONNECTOR:20:DP-1] set DPMS on
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:intel_prepare_page_flip], preparing flip with no unpin work?
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
wlan0: authenticate with d8:c7:c8:ad:e3:a9
wlan0: send auth to d8:c7:c8:ad:e3:a9 (try 1/3)
wlan0: send auth to d8:c7:c8:ad:e3:a9 (try 2/3)
wlan0: authenticated
wlan0: associate with d8:c7:c8:ad:e3:a9 (try 1/3)
wlan0: RX AssocResp from d8:c7:c8:ad:e3:a9 (capab=0x401 status=0 aid=4)
wlan0: associated
wlan0: Wrong control channel in association response: configured center-freq: 5180 hti-cfreq: 5540 hti->control_chan: 108 band: 1. Disabling HT.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with d8:c7:c8:ad:e3:a1
wlan0: send auth to d8:c7:c8:ad:e3:a1 (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from d8:c7:c8:ad:e3:a1
wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1/3)
wlan0: RX AssocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2)
wlan0: associated
wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
[drm:intel_panel_get_max_backlight], max backlight PWM = 4648
[drm:intel_panel_actually_set_backlight], set backlight PWM = 4648
wlan0: no IPv6 routers present
[drm:i915_driver_open],
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 140000 1920 1968 2000 2096 1080 1083 1088 1113 0x48 0xa
[drm:drm_mode_getconnector], [CONNECTOR:7:?]
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:14:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:17:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:drm_edid_to_eld], ELD: no CEA Extension found
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] probed modes :
[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[drm:drm_mode_debug_printmodeline], Modeline 58:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 60:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 59:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 57:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 53:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 52:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 48:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 47:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:drm_mode_getconnector], [CONNECTOR:20:?]
[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[drm:intel_crt_detect], CRT not detected via hotplug
[drm:output_poll_execute], [CONNECTOR:14:VGA-1] status updated from 2 to 2
[drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 2 to 2
[drm:intel_dp_detect], DPCD: 110a824100030181
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[drm:output_poll_execute], [CONNECTOR:20:DP-1] status updated from 1 to 1
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set],
[drm:intel_crtc_cursor_set], cursor off
[drm:intel_crtc_cursor_set],
next prev parent reply other threads:[~2012-06-14 14:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 13:26 [3.4 regression] [bisected] DisplayPort fails to come on Wouter M. Koolen
2012-06-14 14:00 ` Dave Airlie
2012-06-14 14:05 ` Daniel Vetter
2012-06-14 14:48 ` Wouter M. Koolen [this message]
2012-06-14 17:14 ` Wouter M. Koolen
2012-06-14 17:27 ` Daniel Vetter
2012-06-14 18:29 ` Wouter M. Koolen
2012-06-14 21:52 ` Brown, Len
2012-06-15 8:23 ` Wouter M. Koolen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FD9F9B0.9030204@cwi.nl \
--to=w.m.koolen-wijkstra@cwi.nl \
--cc=airlied@gmail.com \
--cc=chris.wilson@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intergalactic.anonymous@gmail.com \
--cc=jbarnes@virtuousgeek.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.