All of lore.kernel.org
 help / color / mirror / Atom feed
From: stigge@antcom.de (Roland Stigge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] leds: Add DT support for leds-pca9532
Date: Sun, 17 Jun 2012 13:51:05 +0200	[thread overview]
Message-ID: <4FDDC4A9.1040706@antcom.de> (raw)
In-Reply-To: <4FDCA0FC.5000409@wwwdotorg.org>

Hi,

On 16/06/12 17:06, Stephen Warren wrote:
>> +- nxp,typecodes: groups of 2 bits for each of the 16 pins:
>> +  0: None
>> +  1: LED
>> +  2: Beep
>> +  3: GPIO
>> +- nxp,statecodes: groups of 2 bits for each of the 16 pins:
>> +  0: off
>> +  1: on
>> +  2: pwm0
>> +  3: pwm1
>> +
>> +Optional properties:
>> +- nxp,psc: array of 2 numbers: PSC values for the two PWM channels (see datasheet)
>> +- nxp,pwm: array of 2 numbers: PWM values for the two PWM channels (see datasheet)
> 
> Shouldn't that all be exposed using a combination of the pinctrl
> bindings that are in 3.5, and the PWM bindings that should be coming in 3.6?

Thanks for the note! I found a pwm tree that should have this at

http://gitorious.org/linux-pwm/linux-pwm

but it gives me server errors. Is there a place where I can have a look?

Thanks in advance,

Roland

WARNING: multiple messages have this Message-ID (diff)
From: Roland Stigge <stigge@antcom.de>
To: Stephen Warren <swarren@wwwdotorg.org>
Cc: riku.voipio@iki.fi, bryan.wu@canonical.com, rpurdie@rpsys.net,
	linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree-discuss@lists.ozlabs.org, aletes.xgr@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] leds: Add DT support for leds-pca9532
Date: Sun, 17 Jun 2012 13:51:05 +0200	[thread overview]
Message-ID: <4FDDC4A9.1040706@antcom.de> (raw)
In-Reply-To: <4FDCA0FC.5000409@wwwdotorg.org>

Hi,

On 16/06/12 17:06, Stephen Warren wrote:
>> +- nxp,typecodes: groups of 2 bits for each of the 16 pins:
>> +  0: None
>> +  1: LED
>> +  2: Beep
>> +  3: GPIO
>> +- nxp,statecodes: groups of 2 bits for each of the 16 pins:
>> +  0: off
>> +  1: on
>> +  2: pwm0
>> +  3: pwm1
>> +
>> +Optional properties:
>> +- nxp,psc: array of 2 numbers: PSC values for the two PWM channels (see datasheet)
>> +- nxp,pwm: array of 2 numbers: PWM values for the two PWM channels (see datasheet)
> 
> Shouldn't that all be exposed using a combination of the pinctrl
> bindings that are in 3.5, and the PWM bindings that should be coming in 3.6?

Thanks for the note! I found a pwm tree that should have this at

http://gitorious.org/linux-pwm/linux-pwm

but it gives me server errors. Is there a place where I can have a look?

Thanks in advance,

Roland

  reply	other threads:[~2012-06-17 11:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-16 14:10 [PATCH] leds: Add DT support for leds-pca9532 Roland Stigge
2012-06-16 14:10 ` Roland Stigge
2012-06-16 14:10 ` Roland Stigge
2012-06-16 15:06 ` Stephen Warren
2012-06-16 15:06   ` Stephen Warren
2012-06-17 11:51   ` Roland Stigge [this message]
2012-06-17 11:51     ` Roland Stigge
2012-06-17 18:02     ` Stephen Warren
2012-06-17 18:02       ` Stephen Warren
2012-06-19  6:16       ` Thierry Reding
2012-06-19  6:16         ` Thierry Reding
  -- strict thread matches above, loose matches on Subject: below --
2014-09-09 13:28 Roland Stigge
     [not found] ` <1410269280-8761-1-git-send-email-stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>
2014-09-09 18:08   ` Arnd Bergmann
2014-09-09 18:08     ` Arnd Bergmann
2014-09-10 15:22     ` Roland Stigge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FDDC4A9.1040706@antcom.de \
    --to=stigge@antcom.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.