From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Mon, 25 Jun 2012 10:34:26 +0200 Subject: [PATCH v3 3/7] ARM: at91: remove static irq priorities for sam9x5 In-Reply-To: <1340467539-12294-4-git-send-email-ludovic.desroches@atmel.com> References: <1340467539-12294-1-git-send-email-ludovic.desroches@atmel.com> <1340467539-12294-4-git-send-email-ludovic.desroches@atmel.com> Message-ID: <4FE82292.9050406@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 06/23/2012 06:05 PM, ludovic.desroches at atmel.com : > From: Ludovic Desroches > > Since irq priorites are managed in DT, static ones are no more required for > sam9x5 which only has DT support. > > Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre > --- > arch/arm/mach-at91/at91sam9x5.c | 38 -------------------------------------- > 1 files changed, 0 insertions(+), 38 deletions(-) > > diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c > index 537710b..477cf9d 100644 > --- a/arch/arm/mach-at91/at91sam9x5.c > +++ b/arch/arm/mach-at91/at91sam9x5.c > @@ -319,47 +319,9 @@ void __init at91sam9x5_initialize(void) > /* -------------------------------------------------------------------- > * Interrupt initialization > * -------------------------------------------------------------------- */ > -/* > - * The default interrupt priority levels (0 = lowest, 7 = highest). > - */ > -static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { > - 7, /* Advanced Interrupt Controller (FIQ) */ > - 7, /* System Peripherals */ > - 1, /* Parallel IO Controller A and B */ > - 1, /* Parallel IO Controller C and D */ > - 4, /* Soft Modem */ > - 5, /* USART 0 */ > - 5, /* USART 1 */ > - 5, /* USART 2 */ > - 5, /* USART 3 */ > - 6, /* Two-Wire Interface 0 */ > - 6, /* Two-Wire Interface 1 */ > - 6, /* Two-Wire Interface 2 */ > - 0, /* Multimedia Card Interface 0 */ > - 5, /* Serial Peripheral Interface 0 */ > - 5, /* Serial Peripheral Interface 1 */ > - 5, /* UART 0 */ > - 5, /* UART 1 */ > - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ > - 0, /* Pulse Width Modulation Controller */ > - 0, /* ADC Controller */ > - 0, /* DMA Controller 0 */ > - 0, /* DMA Controller 1 */ > - 2, /* USB Host High Speed port */ > - 2, /* USB Device High speed port */ > - 3, /* Ethernet MAC 0 */ > - 3, /* LDC Controller or Image Sensor Interface */ > - 0, /* Multimedia Card Interface 1 */ > - 3, /* Ethernet MAC 1 */ > - 4, /* Synchronous Serial Interface */ > - 4, /* CAN Controller 0 */ > - 4, /* CAN Controller 1 */ > - 0, /* Advanced Interrupt Controller (IRQ0) */ > -}; > > struct at91_init_soc __initdata at91sam9x5_soc = { > .map_io = at91sam9x5_map_io, > - .default_irq_priority = at91sam9x5_default_irq_priority, > .register_clocks = at91sam9x5_register_clocks, > .init = at91sam9x5_initialize, > }; > -- Nicolas Ferre