From: "Prchal Jiří" <jiri.prchal@aksignal.cz>
To: alsa-devel@alsa-project.org, vbarinov@embeddedalley.com,
mr.swami.reddy@ti.com, peter.ujfalusi@ti.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
sudhakar.raj@ti.com, nsekhar@ti.com, lrg@ti.com
Subject: [PATCH] ASoC: tlv320aic3x: add input clock selection
Date: Tue, 26 Jun 2012 12:21:28 +0200 [thread overview]
Message-ID: <4FE98D28.8050908@aksignal.cz> (raw)
This patch adds input selection of main codec clock - from what pin.
Tested with TLV320AIC3106 on BCLK and MCLK.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
--- /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.c.orig
+++ /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.c
@@ -972,6 +972,10 @@
struct snd_soc_codec *codec = codec_dai->codec;
struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
+ /* set clock on MCLK or GPIO2 or BCLK */
+ snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, PLLCLK_IN_MASK, clk_id);
+ snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, CLKDIV_IN_MASK, clk_id);
+
aic3x->sysclk = freq;
return 0;
}
--- /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.h.orig
+++ /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.h
@@ -178,6 +178,13 @@
#define PLL_CLKIN_SHIFT 4
#define MCLK_SOURCE 0x0
#define PLL_CLKDIV_SHIFT 0
+#define PLLCLK_IN_MASK 0x30
+#define CLKDIV_IN_MASK 0xc0
+/* clock in source */
+#define CLKIN_MCLK 0
+#define CLKIN_GPIO2 1
+#define CLKIN_BCLK 2
+
/* Software reset register bits */
#define SOFT_RESET 0x80
next reply other threads:[~2012-06-26 10:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 10:21 Prchal Jiří [this message]
2012-06-26 10:26 ` [PATCH] ASoC: tlv320aic3x: add input clock selection Mark Brown
2012-06-26 11:47 ` Prchal Jiří
-- strict thread matches above, loose matches on Subject: below --
2012-07-10 12:36 Jiri Prchal
2012-07-10 13:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE98D28.8050908@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=mr.swami.reddy@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=sudhakar.raj@ti.com \
--cc=vbarinov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.