diff for duplicates of <4FE9E907.6050803@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index cce602c..3cd126f 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -11,7 +11,7 @@ On 06/26/2012 02:56 AM, Dong Aisheng wrote: >> >> So, we start off with the plain SDHCI controller node: >> ->> sdhci@78000000 { +>> sdhci at 78000000 { >> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >> reg = <0x78000000 0x200>; >> interrupts = <0 14 0x04>; @@ -19,7 +19,7 @@ On 06/26/2012 02:56 AM, Dong Aisheng wrote: >> >> Then, we add a child node to represent the device that's attached: >> ->> sdhci@78000000 { +>> sdhci at 78000000 { >> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >> reg = <0x78000000 0x200>; >> interrupts = <0 14 0x04>; @@ -40,18 +40,18 @@ On 06/26/2012 02:56 AM, Dong Aisheng wrote: >> different types of device into the socket? Might we end up with >> something like: >> ->> sdhci@78000000 { +>> sdhci at 78000000 { >> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >> reg = <0x78000000 0x200>; >> interrupts = <0 14 0x04>; >> ->> sdio-device-option@0 { +>> sdio-device-option at 0 { >> compatible = "broadcom,bcm4239"; >> reset-gpios = <...>; >> enable-gpios = <...>; >> }; >> ->> sdio-device-option@1 { +>> sdio-device-option at 1 { >> compatible = "broadcom,bcm4330"; >> reset-gpios = <...>; >> enable-gpios = <...>; @@ -78,7 +78,7 @@ would address this issue: http://www.spinics.net/lists/linux-usb/msg66013.html -> sdhci@78000000 { +> sdhci at 78000000 { > compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; > reg = <0x78000000 0x200>; > interrupts = <0 14 0x04>; @@ -95,7 +95,7 @@ http://www.spinics.net/lists/linux-usb/msg66013.html > */ > hub { > hub { /* also dynamic */ -> port@2 { +> port at 2 { > child-supply = <®ulator>; > reset-gpios = <&gpio 0 0>; > }; diff --git a/a/content_digest b/N1/content_digest index 3fa9ae1..39b491a 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -9,31 +9,10 @@ "ref\06B4D417B830BC44B8026029FD256F7F1C6EE2DD626@HKMAIL01.nvidia.com\0" "ref\04FE112F2.7000506@wwwdotorg.org\0" "ref\020120626085605.GA6047@shlinux2.ap.freescale.net\0" - "ref\020120626085605.GA6047-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org\0" - "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" - "Subject\0Re: Where to power on the wifi device before loading the driver.\0" + "From\0swarren@wwwdotorg.org (Stephen Warren)\0" + "Subject\0Where to power on the wifi device before loading the driver.\0" "Date\0Tue, 26 Jun 2012 10:53:27 -0600\0" - "To\0Dong Aisheng <aisheng.dong-KZfg59tc24xl57MIdRCFDg@public.gmane.org>\0" - "Cc\0USB list <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>" - alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> - b29397-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Mursalin Akon <makon-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> - 'linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org' <linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - 'Philip Rakity' <prakity-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> - Li Frank-B20596 <B20596-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org> - Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> - 'frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org' <frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> - linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Rakesh Kumar <krakesh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - ARM kernel mailing list <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - r65037-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - Estevam Fabio-R49496 <r49496-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - " 'Mark Brown' <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>'linu\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "(I'm adding everyone on thread \"ARM: imx6q: add config-on-boot gpios\" to\n" @@ -49,7 +28,7 @@ ">>\n" ">> So, we start off with the plain SDHCI controller node:\n" ">>\n" - ">> sdhci@78000000 {\n" + ">> sdhci at 78000000 {\n" ">> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">> \treg = <0x78000000 0x200>;\n" ">> \tinterrupts = <0 14 0x04>;\n" @@ -57,7 +36,7 @@ ">>\n" ">> Then, we add a child node to represent the device that's attached:\n" ">>\n" - ">> sdhci@78000000 {\n" + ">> sdhci at 78000000 {\n" ">> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">> \treg = <0x78000000 0x200>;\n" ">> \tinterrupts = <0 14 0x04>;\n" @@ -78,18 +57,18 @@ ">> different types of device into the socket? Might we end up with\n" ">> something like:\n" ">>\n" - ">> sdhci@78000000 {\n" + ">> sdhci at 78000000 {\n" ">> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">> \treg = <0x78000000 0x200>;\n" ">> \tinterrupts = <0 14 0x04>;\n" ">>\n" - ">> \tsdio-device-option@0 {\n" + ">> \tsdio-device-option at 0 {\n" ">> \t\tcompatible = \"broadcom,bcm4239\";\n" ">> \t\treset-gpios = <...>;\n" ">> \t\tenable-gpios = <...>;\n" ">> \t};\n" ">>\n" - ">> \tsdio-device-option@1 {\n" + ">> \tsdio-device-option at 1 {\n" ">> \t\tcompatible = \"broadcom,bcm4330\";\n" ">> \t\treset-gpios = <...>;\n" ">> \t\tenable-gpios = <...>;\n" @@ -116,7 +95,7 @@ "\n" "http://www.spinics.net/lists/linux-usb/msg66013.html\n" "\n" - "> sdhci@78000000 {\n" + "> sdhci at 78000000 {\n" "> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" "> \treg = <0x78000000 0x200>;\n" "> \tinterrupts = <0 14 0x04>;\n" @@ -133,7 +112,7 @@ "> */\n" "> hub {\n" "> hub { /* also dynamic */\n" - "> port@2 {\n" + "> port at 2 {\n" "> child-supply = <®ulator>;\n" "> reset-gpios = <&gpio 0 0>;\n" "> };\n" @@ -153,4 +132,4 @@ "SD and USB call into, rather than having them both re-implement it from\n" scratch. -33fb2f99444ad788394351cbd0d59e88a3913a665e8483de02292068e4ffece1 +54cbaee0243ae1cdb58639419c3ca758f674788221a8b4bb652e10d8fd73c3b0
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.