diff for duplicates of <4FEA28EC.2080906@gmail.com> diff --git a/a/1.txt b/N1/1.txt index e59ff85..5abedd1 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -12,7 +12,7 @@ On 06/26/2012 11:53 AM, Stephen Warren wrote: >>> >>> So, we start off with the plain SDHCI controller node: >>> ->>> sdhci@78000000 { +>>> sdhci at 78000000 { >>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>> reg = <0x78000000 0x200>; >>> interrupts = <0 14 0x04>; @@ -20,7 +20,7 @@ On 06/26/2012 11:53 AM, Stephen Warren wrote: >>> >>> Then, we add a child node to represent the device that's attached: >>> ->>> sdhci@78000000 { +>>> sdhci at 78000000 { >>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>> reg = <0x78000000 0x200>; >>> interrupts = <0 14 0x04>; @@ -41,18 +41,18 @@ On 06/26/2012 11:53 AM, Stephen Warren wrote: >>> different types of device into the socket? Might we end up with >>> something like: >>> ->>> sdhci@78000000 { +>>> sdhci at 78000000 { >>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>> reg = <0x78000000 0x200>; >>> interrupts = <0 14 0x04>; >>> ->>> sdio-device-option@0 { +>>> sdio-device-option at 0 { >>> compatible = "broadcom,bcm4239"; >>> reset-gpios = <...>; >>> enable-gpios = <...>; >>> }; >>> ->>> sdio-device-option@1 { +>>> sdio-device-option at 1 { >>> compatible = "broadcom,bcm4330"; >>> reset-gpios = <...>; >>> enable-gpios = <...>; @@ -79,7 +79,7 @@ On 06/26/2012 11:53 AM, Stephen Warren wrote: > > http://www.spinics.net/lists/linux-usb/msg66013.html > ->> sdhci@78000000 { +>> sdhci at 78000000 { >> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >> reg = <0x78000000 0x200>; >> interrupts = <0 14 0x04>; @@ -104,7 +104,7 @@ requirements. If so then that would be difficult to describe generically. >> */ >> hub { >> hub { /* also dynamic */ ->> port@2 { +>> port at 2 { >> child-supply = <®ulator>; >> reset-gpios = <&gpio 0 0>; >> }; diff --git a/a/content_digest b/N1/content_digest index c740648..6589604 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -10,31 +10,10 @@ "ref\04FE112F2.7000506@wwwdotorg.org\0" "ref\020120626085605.GA6047@shlinux2.ap.freescale.net\0" "ref\04FE9E907.6050803@wwwdotorg.org\0" - "ref\04FE9E907.6050803-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org\0" - "From\0Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Subject\0Re: Where to power on the wifi device before loading the driver.\0" + "From\0robherring2@gmail.com (Rob Herring)\0" + "Subject\0Where to power on the wifi device before loading the driver.\0" "Date\0Tue, 26 Jun 2012 16:26:04 -0500\0" - "To\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" - "Cc\0Dong Aisheng <aisheng.dong-KZfg59tc24xl57MIdRCFDg@public.gmane.org>" - 'linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org' <linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - USB list <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> - b29397-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Mursalin Akon <makon-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> - 'Philip Rakity' <prakity-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> - Li Frank-B20596 <B20596-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org> - 'frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org' <frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> - linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Rakesh Kumar <krakesh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - r65037-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - Estevam Fabio-R49496 <r49496-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - " 'Mark Brown' <broonie@opensour>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 06/26/2012 11:53 AM, Stephen Warren wrote:\n" @@ -51,7 +30,7 @@ ">>>\n" ">>> So, we start off with the plain SDHCI controller node:\n" ">>>\n" - ">>> sdhci@78000000 {\n" + ">>> sdhci at 78000000 {\n" ">>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>> \treg = <0x78000000 0x200>;\n" ">>> \tinterrupts = <0 14 0x04>;\n" @@ -59,7 +38,7 @@ ">>>\n" ">>> Then, we add a child node to represent the device that's attached:\n" ">>>\n" - ">>> sdhci@78000000 {\n" + ">>> sdhci at 78000000 {\n" ">>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>> \treg = <0x78000000 0x200>;\n" ">>> \tinterrupts = <0 14 0x04>;\n" @@ -80,18 +59,18 @@ ">>> different types of device into the socket? Might we end up with\n" ">>> something like:\n" ">>>\n" - ">>> sdhci@78000000 {\n" + ">>> sdhci at 78000000 {\n" ">>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>> \treg = <0x78000000 0x200>;\n" ">>> \tinterrupts = <0 14 0x04>;\n" ">>>\n" - ">>> \tsdio-device-option@0 {\n" + ">>> \tsdio-device-option at 0 {\n" ">>> \t\tcompatible = \"broadcom,bcm4239\";\n" ">>> \t\treset-gpios = <...>;\n" ">>> \t\tenable-gpios = <...>;\n" ">>> \t};\n" ">>>\n" - ">>> \tsdio-device-option@1 {\n" + ">>> \tsdio-device-option at 1 {\n" ">>> \t\tcompatible = \"broadcom,bcm4330\";\n" ">>> \t\treset-gpios = <...>;\n" ">>> \t\tenable-gpios = <...>;\n" @@ -118,7 +97,7 @@ "> \n" "> http://www.spinics.net/lists/linux-usb/msg66013.html\n" "> \n" - ">> sdhci@78000000 {\n" + ">> sdhci at 78000000 {\n" ">> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">> \treg = <0x78000000 0x200>;\n" ">> \tinterrupts = <0 14 0x04>;\n" @@ -143,7 +122,7 @@ ">> */\n" ">> hub {\n" ">> hub { /* also dynamic */\n" - ">> port@2 {\n" + ">> port at 2 {\n" ">> child-supply = <®ulator>;\n" ">> reset-gpios = <&gpio 0 0>;\n" ">> };\n" @@ -176,4 +155,4 @@ "\n" Rob -1622f4bba299d93ac002404d0cb8921c834edfae63f4188c1461ebea349e5572 +6daded494f48f16afc72f6f32ec7552499c43dc69a908d110a241287d4eb1236
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.