diff for duplicates of <4FEA39E8.6090502@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index 22bc864..c7e0385 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -13,7 +13,7 @@ On 06/26/2012 03:26 PM, Rob Herring wrote: >>>> >>>> So, we start off with the plain SDHCI controller node: >>>> ->>>> sdhci@78000000 { +>>>> sdhci at 78000000 { >>>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>>> reg = <0x78000000 0x200>; >>>> interrupts = <0 14 0x04>; @@ -21,7 +21,7 @@ On 06/26/2012 03:26 PM, Rob Herring wrote: >>>> >>>> Then, we add a child node to represent the device that's attached: >>>> ->>>> sdhci@78000000 { +>>>> sdhci at 78000000 { >>>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>>> reg = <0x78000000 0x200>; >>>> interrupts = <0 14 0x04>; @@ -42,18 +42,18 @@ On 06/26/2012 03:26 PM, Rob Herring wrote: >>>> different types of device into the socket? Might we end up with >>>> something like: >>>> ->>>> sdhci@78000000 { +>>>> sdhci at 78000000 { >>>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>>> reg = <0x78000000 0x200>; >>>> interrupts = <0 14 0x04>; >>>> ->>>> sdio-device-option@0 { +>>>> sdio-device-option at 0 { >>>> compatible = "broadcom,bcm4239"; >>>> reset-gpios = <...>; >>>> enable-gpios = <...>; >>>> }; >>>> ->>>> sdio-device-option@1 { +>>>> sdio-device-option at 1 { >>>> compatible = "broadcom,bcm4330"; >>>> reset-gpios = <...>; >>>> enable-gpios = <...>; @@ -80,7 +80,7 @@ On 06/26/2012 03:26 PM, Rob Herring wrote: >> >> http://www.spinics.net/lists/linux-usb/msg66013.html >> ->>> sdhci@78000000 { +>>> sdhci at 78000000 { >>> compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; >>> reg = <0x78000000 0x200>; >>> interrupts = <0 14 0x04>; @@ -112,7 +112,7 @@ and device enumeration. >>> */ >>> hub { >>> hub { /* also dynamic */ ->>> port@2 { +>>> port at 2 { >>> child-supply = <®ulator>; >>> reset-gpios = <&gpio 0 0>; >>> }; diff --git a/a/content_digest b/N1/content_digest index 50990cd..181dd40 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -11,31 +11,10 @@ "ref\020120626085605.GA6047@shlinux2.ap.freescale.net\0" "ref\04FE9E907.6050803@wwwdotorg.org\0" "ref\04FEA28EC.2080906@gmail.com\0" - "ref\04FEA28EC.2080906-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" - "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" - "Subject\0Re: Where to power on the wifi device before loading the driver.\0" + "From\0swarren@wwwdotorg.org (Stephen Warren)\0" + "Subject\0Where to power on the wifi device before loading the driver.\0" "Date\0Tue, 26 Jun 2012 16:38:32 -0600\0" - "To\0Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Cc\0Dong Aisheng <aisheng.dong-KZfg59tc24xl57MIdRCFDg@public.gmane.org>" - 'linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org' <linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - USB list <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> - b29397-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Mursalin Akon <makon-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> - 'Philip Rakity' <prakity-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> - Li Frank-B20596 <B20596-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org <devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org> - 'frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org' <frankyl-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> - linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Rakesh Kumar <krakesh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - r65037-KZfg59tc24xl57MIdRCFDg@public.gmane.org - Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> - Estevam Fabio-R49496 <r49496-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - " 'Mark Brown' <broonie@opensour>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 06/26/2012 03:26 PM, Rob Herring wrote:\n" @@ -53,7 +32,7 @@ ">>>>\n" ">>>> So, we start off with the plain SDHCI controller node:\n" ">>>>\n" - ">>>> sdhci@78000000 {\n" + ">>>> sdhci at 78000000 {\n" ">>>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>>> \treg = <0x78000000 0x200>;\n" ">>>> \tinterrupts = <0 14 0x04>;\n" @@ -61,7 +40,7 @@ ">>>>\n" ">>>> Then, we add a child node to represent the device that's attached:\n" ">>>>\n" - ">>>> sdhci@78000000 {\n" + ">>>> sdhci at 78000000 {\n" ">>>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>>> \treg = <0x78000000 0x200>;\n" ">>>> \tinterrupts = <0 14 0x04>;\n" @@ -82,18 +61,18 @@ ">>>> different types of device into the socket? Might we end up with\n" ">>>> something like:\n" ">>>>\n" - ">>>> sdhci@78000000 {\n" + ">>>> sdhci at 78000000 {\n" ">>>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>>> \treg = <0x78000000 0x200>;\n" ">>>> \tinterrupts = <0 14 0x04>;\n" ">>>>\n" - ">>>> \tsdio-device-option@0 {\n" + ">>>> \tsdio-device-option at 0 {\n" ">>>> \t\tcompatible = \"broadcom,bcm4239\";\n" ">>>> \t\treset-gpios = <...>;\n" ">>>> \t\tenable-gpios = <...>;\n" ">>>> \t};\n" ">>>>\n" - ">>>> \tsdio-device-option@1 {\n" + ">>>> \tsdio-device-option at 1 {\n" ">>>> \t\tcompatible = \"broadcom,bcm4330\";\n" ">>>> \t\treset-gpios = <...>;\n" ">>>> \t\tenable-gpios = <...>;\n" @@ -120,7 +99,7 @@ ">>\n" ">> http://www.spinics.net/lists/linux-usb/msg66013.html\n" ">>\n" - ">>> sdhci@78000000 {\n" + ">>> sdhci at 78000000 {\n" ">>> \tcompatible = \"nvidia,tegra30-sdhci\", \"nvidia,tegra20-sdhci\";\n" ">>> \treg = <0x78000000 0x200>;\n" ">>> \tinterrupts = <0 14 0x04>;\n" @@ -152,7 +131,7 @@ ">>> */\n" ">>> hub {\n" ">>> hub { /* also dynamic */\n" - ">>> port@2 {\n" + ">>> port at 2 {\n" ">>> child-supply = <®ulator>;\n" ">>> reset-gpios = <&gpio 0 0>;\n" ">>> };\n" @@ -189,4 +168,4 @@ "enable a clock out to the card too, so it gets a bit more complex than\n" just a couple GPIOs... -d487f4ef5f240e2e44137a17e0310e15d99a0b89b5d4df621cc4bdffe7478b9c +6331fa803a9da9440f585b35031b2063d1ed92c30d0ee67694426ec02b2abda7
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.