All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shimoda, Yoshihiro <yoshihiro.shimoda.uh@renesas.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code
Date: Wed, 27 Jun 2012 11:38:02 +0900	[thread overview]
Message-ID: <4FEA720A.0@renesas.com> (raw)

The SH7757's ETHER can work using the SH7724's setting. So, the patch
modifies it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/net/sh_eth.c |    9 +--------
 drivers/net/sh_eth.h |   14 ++------------
 2 files changed, 3 insertions(+), 20 deletions(-)

diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index bb57e4d..1825059 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -376,12 +376,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 	outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));

 	/* Configure e-mac registers */
-#if defined(CONFIG_CPU_SH7757)
-	outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP |
-		ECSIPR_MPDIP | ECSIPR_ICDIP, ECSIPR(port));
-#else
 	outl(0, ECSIPR(port));
-#endif

 	/* Set Mac address */
 	val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
@@ -395,14 +390,12 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 #if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
 	outl(0, PIPR(port));
 #endif
-#if !defined(CONFIG_CPU_SH7724)
+#if !defined(CONFIG_CPU_SH7724) && !defined(CONFIG_CPU_SH7757)
 	outl(APR_AP, APR(port));
 	outl(MPR_MP, MPR(port));
 #endif
 #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
 	outl(TPAUSER_TPAUSE, TPAUSER(port));
-#elif defined(CONFIG_CPU_SH7757)
-	outl(TPAUSER_UNLIMITED, TPAUSER(port));
 #endif

 #if defined(CONFIG_CPU_SH7734)
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 50f4b69..5276be3 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -319,7 +319,7 @@ enum EESR_BIT {
 	EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
 	EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
 	EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
-#if defined(CONFIG_CPU_SH7724) && !defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7724) || defined(CONFIG_CPU_SH7757)
 	EESR_CND  = 0x00000800,
 #endif
 	EESR_DLC  = 0x00000400,
@@ -426,9 +426,7 @@ enum FELIC_MODE_BIT {
 #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
 #define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \
 						ECMR_TXF | ECMR_MCT)
-#elif CONFIG_CPU_SH7757
-#define ECMR_CHG_DM	(ECMR_ZPF)
-#elif CONFIG_CPU_SH7724
+#elif CONFIG_CPU_SH7724 || CONFIG_CPU_SH7757
 #define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
 #else
 #define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
@@ -473,20 +471,12 @@ enum ECSIPR_STATUS_MASK_BIT {

 /* APR */
 enum APR_BIT {
-#ifdef CONFIG_CPU_SH7757
-	APR_AP = 0x00000001,
-#else
 	APR_AP = 0x00000004,
-#endif
 };

 /* MPR */
 enum MPR_BIT {
-#ifdef CONFIG_CPU_SH7757
-	MPR_MP = 0x00000001,
-#else
 	MPR_MP = 0x00000006,
-#endif
 };

 /* TRSCER */
-- 
1.7.1

             reply	other threads:[~2012-06-27  2:38 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-27  2:38 Shimoda, Yoshihiro [this message]
2012-06-29  1:55 ` [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code Nobuhiro Iwamatsu
2012-07-23  4:58   ` Shimoda, Yoshihiro
2012-07-23  6:27     ` Nobuhiro Iwamatsu
2012-07-24  0:52       ` Shimoda, Yoshihiro
2012-07-24 19:22         ` Joe Hershberger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FEA720A.0@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.