diff for duplicates of <4FEB90A8.8050901@googlemail.com>

diff --git a/a/1.txt b/N1/1.txt
index 05757e2..b4e9947 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -17,7 +17,7 @@ memmap=nn[KMG]$ss[KMG]
             [KNL,ACPI] Mark specific memory as reserved.
             Region of memory to be used, from ss to ss+nn.
             Example: Exclude memory from 0x18690000-0x1869ffff
-                     memmap=64K$0x18690000
+                     memmapdK$0x18690000
                      or
                      memmap=0x10000$0x18690000
 
@@ -62,7 +62,7 @@ for example, when there is current applied to the fan - i.e. its "pwmX"
 value is >0 and "fanX_input=0", i.e. the fan is not moving - the 
 scenario I described above). If that is the case, then the script, 
 temporarily, switches to "manual" control (pwmX_enable=1), throttles up 
-the fan up to a maximum (i.e. pwmX=255), checks that the fan is running, 
+the fan up to a maximum (i.e. pwmX%5), checks that the fan is running, 
 and then restores automatic control (reverts pwmX_enable back to 2).
 
 That way, when the fan is initially stopped and the BIOS/f71882fg driver 
@@ -96,3 +96,9 @@ the wall with these problems for the past week with no end in sight!
 
 
 MZ
+
+
+_______________________________________________
+lm-sensors mailing list
+lm-sensors@lm-sensors.org
+http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
diff --git a/a/content_digest b/N1/content_digest
index 9d32e81..848b5f8 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -2,7 +2,7 @@
  "ref\020120627171505.GB12712@roeck-us.net\0"
  "From\0Michael Zintakis <michael.zintakis@googlemail.com>\0"
  "Subject\0Re: [lm-sensors] Fintek f71882fg ACPI conflict\0"
- "Date\0Thu, 28 Jun 2012 00:00:56 +0100\0"
+ "Date\0Wed, 27 Jun 2012 23:00:56 +0000\0"
  "To\0Guenter Roeck <linux@roeck-us.net>\0"
  "Cc\0lm-sensors@lm-sensors.org"
   Len Brown <lenb@kernel.org>
@@ -28,7 +28,7 @@
  "            [KNL,ACPI] Mark specific memory as reserved.\n"
  "            Region of memory to be used, from ss to ss+nn.\n"
  "            Example: Exclude memory from 0x18690000-0x1869ffff\n"
- "                     memmap=64K$0x18690000\n"
+ "                     memmapdK$0x18690000\n"
  "                     or\n"
  "                     memmap=0x10000$0x18690000\n"
  "\n"
@@ -73,7 +73,7 @@
  "value is >0 and \"fanX_input=0\", i.e. the fan is not moving - the \n"
  "scenario I described above). If that is the case, then the script, \n"
  "temporarily, switches to \"manual\" control (pwmX_enable=1), throttles up \n"
- "the fan up to a maximum (i.e. pwmX=255), checks that the fan is running, \n"
+ "the fan up to a maximum (i.e. pwmX%5), checks that the fan is running, \n"
  "and then restores automatic control (reverts pwmX_enable back to 2).\n"
  "\n"
  "That way, when the fan is initially stopped and the BIOS/f71882fg driver \n"
@@ -106,6 +106,12 @@
  "the wall with these problems for the past week with no end in sight!\n"
  "\n"
  "\n"
- MZ
+ "MZ\n"
+ "\n"
+ "\n"
+ "_______________________________________________\n"
+ "lm-sensors mailing list\n"
+ "lm-sensors@lm-sensors.org\n"
+ http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
 
-f67fadcfc38e7d9b045564ca46a72284d3d48bf3fb63fb37de99a7d652e6e823
+ced87b38cb9c963ede276c61f44aa16afa562b50b07899d6ac05b7bcf6947365
