Re: BSP for taskit stamp9g20

[Bruce Ashfield <bruce.ashfield@windriver.com>]

On 12-06-29 01:19 PM, Markus Hubig wrote:
> Hello @all, hello Bruce!
>
> https://bitbucket.org/imko/meta-stamp9g20
>
> here you can find my first attempt of a BSP for the taskit stamp9g20 and
> portuxg20 Board. Until now there is only the kernel part. Please have a look
> and give comments.

I had a look, and it is definitely a good start. I can see that it
is still a work in progress, since you have one unreferenced file
(stamp9g20-non_hardware.cfg) and a few zero byte files in for the
kernel board description.

The board description looks good, standard, -rt kernels and hardware
configurations. If you do end up with board patches you would want
to update the stamp9g20-preempt-rt.scc with 'branch stamp9g20' after
the ktype include. The re-use of the -rt base branch is in some of the
basic BSPs to show how we can do it, but if you actually patch the
kernel, you'd want to keep them separate (typically).

stamp9g20.cfg actually looks pretty good. Those are hardware or board
specific settings, so generally speaking, they are fine in a board
configuration.

Taking it to the shiny new 3.4 kernel is also something to consider! :)

Cheers,

Bruce


>
> Thanks, Markus
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto