From: Xose Vazquez Perez <xose.vazquez@gmail.com>
To: wireless-regdb@lists.infradead.org
Subject: [wireless-regdb] EU rules: harmonised use of the 5 GHz frequency bands
Date: Sun, 01 Jul 2012 02:33:12 +0200 [thread overview]
Message-ID: <4FEF9AC8.3040908@gmail.com> (raw)
hi,
* ECC/DEC/(04)08 Harmonised use of 5 GHz for the implementation
of WAS/RLANs: http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
---cut---
[...]
DECIDES
1. that this Decision designates the frequency bands 5.150-5.350 MHz
and 5.470–5.725 MHz for the implementation of Wireless Access
Systems including Radio Local Area Networks (WAS/RLANs) and the
use of equipment complying with the harmonised standard EN 301 893,
which may also be demonstrated by compliance with equivalent
technical specifications (in the sense of Article 3(2) of the
R&TTE Directive);
2. that in the frequency band 5.150-5.350 MHz, WAS/RLANs stations
shall be restricted to indoor use with a maximum mean e.i.r.p.1 of
200 mW and a maximum mean e.i.r.p. density of 10 mW/MHz in any 1MHz
band;
3. that in the frequency band 5.470-5.725 MHz, the indoor and
outdoor use of WAS/RLANs stations shall be restricted to a maximum
mean e.i.r.p.1 of 1 W and a maximum mean e.i.r.p. density of 50mW/MHz
in any 1 MHz band;
4. that, WAS/RLANs operating in the bands 5.250-5.350 MHz and
5.470-5.725 MHz shall either employ transmitter power control, which
provides, on average, a mitigation factor of at least 3 dB on the
maximum permitted output power of the systems; or, if transmitter
power control is not in use, then the maximum permitted mean
e.i.r.p.1 and the corresponding mean e.i.r.p. density limits in
decides 2 and 3 shall be reduced by 3 dB;
5. that, WAS/RLANs operating in the bands 5.250-5.350 MHz and
5.470-5.725 MHz shall use dynamic frequency selection (DFS) as
described in Recommendation ITU-R M. 1652 to ensure compatible
operation with radiodetermination systems;
6. that, in addition to decides 5, the DFS mechanism shall ensure
that the probability of selecting a given channel will be the same
for all available channels. The intention is to provide, on
average, a near-uniform spread of the loading of the spectrum;
7. that this Decision replaces the previous ERC Decision (99)23;
8. that this Decision shall enter into force on 30 October 2009;
9. that CEPT administrations shall communicate the national
measures implementing this Decision to the ECC chairman and the
Office when the Decision is nationally implemented."
[...]
---end---
* Implementation by country:
http://www.erodocdb.dk/doks/implement_doc_adm.aspx?docid=2033
http://www.erodocdb.dk/doks/mapsi_implement.aspx?docid=2033
- Yes ... 38
- Yes Partly ... 2
Russian Federation
Georgia
- Under study ... 1
Albania
- No info ... 7
Andorra
Vatican City
Monaco
Moldova
San Marino
Azerbaijan
Belarus
All EU countries, except those listed above, and for 5GHz
bands, should be clones of the current DE configuration:
(5150 - 5250 @ 40), (N/A, 100 mW), NO-OUTDOOR
(5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
(5470 - 5725 @ 40), (N/A, 500 mW), DFS
-thanks-
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
next reply other threads:[~2012-07-01 0:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-01 0:33 Xose Vazquez Perez [this message]
2012-07-01 11:44 ` [wireless-regdb] EU rules: harmonised use of the 5 GHz frequency bands Xose Vazquez Perez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FEF9AC8.3040908@gmail.com \
--to=xose.vazquez@gmail.com \
--cc=wireless-regdb@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.