[PATCH] ARM: shmobile: kzm9g: add REGULATOR settings to kzm9g_defconfig

[Tetsuyuki Kobayashi <koba@kmckk.co.jp>]

Add REGULATOR settings to kernel config file of kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
Hello, 

I found Guennadi's
"ARM: mach-shmobile: add fixed voltage regulators to kzm9g"
requires REGULATOR setting in kernel config.
Without this, it causes these errors at boot time.

smsc911x: Driver version 2008-10-21
smsc911x smsc911x.0: Failed to get supply 'vdd33a': -517
smsc911x smsc911x.0: (unregistered net_device): couldn't get regulators -517
platform smsc911x.0: Driver smsc911x requests probe deferral


After applying this patch,
 make kzm9g_defconfig
 make menuconfig (as you like)
 make uImage

smsc911x ethernet device works well as before.


 arch/arm/configs/kzm9g_defconfig |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 7b2eecd..d2df401 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -82,6 +82,9 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_GPIO_PCF857X=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DUMMY=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-- 1.7.9.5