From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Golle Date: Tue, 3 Jul 2012 16:52:15 +0300 Subject: [ath9k-devel] Connecting AR9390 to Lantiq board In-Reply-To: <64E8B76F7722324CABA027A4751041A88CBB5A@cps01mx.fitec.org.br> References: <64E8B76F7722324CABA027A4751041A88CBB5A@cps01mx.fitec.org.br> Message-ID: <4FF2F90F.2050404@allnet.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi Ana, OpenWrt doesn't use the mac80211 driver release built-into the kernel. So all you need to do is to make sure the mac80211 package containing the ath9k driver is a recent enough version, and that which still work well even on Linux 2.6.32. Good luck! Daniel On 07/03/12 16:27, Ana Elisa de Campos Lobo wrote: > Hi all, > > I?m completely newbie in Linux drivers. In my project weare planning to connect > an AR9390 Atheros chip on a GRX288 Lantiq board.This board has a > softwareframework (UGW 5.2) which is based on Linux kernel 2.6.32.42 version and > OpenWrt Backfire 10.03. > > I have some initial questions: > > ? Does ATH9K driver support AR9390 chipset? > > ? Which Linux kernel version is necessary to support AR9390 chipset?I > didn?t find this chipset on the ATH9K driver site > (_http://linuxwireless.org/en/users/Drivers/ath9k_), but according to the site > AR9380 requires a Kernel version greater than 2.6.36. > > ? Does anybody tried to connect AR9390 to a Lantiq board based on UGW software? > > Best regards, > > Ana > -- ALLNET GmbH ; Maistr. 2 ; D-82110 Germering ; Germany Tel. +49-89-89422222 - Fax +49-89-89422233 http://www.allnet.de email: Daniel Golle Schulungs-/Veranstaltungsprogramm: http://www.802lab.de Gesch?ftsf?hrer: Wolfgang Marcus Bauer Handelsregister M?nchen B 95922 ; UST-ID-Nr. DE 128214294 ; St.-Nr.117/115/00164 WEEE-Reg.-NR. DE 13101093 Bankverbindung: Sparkasse F?rstenfeldbruck KTO: 2774594 ; BLZ: 70053070 Swift-Code: BYLADEM1FFB ; IBAN: DE61700530700002774594