From: Jonathan Cameron <jic23@kernel.org>
To: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: remove SENSORS_ from Kconfig
Date: Sun, 08 Jul 2012 18:05:41 +0100 [thread overview]
Message-ID: <4FF9BDE5.7050708@kernel.org> (raw)
In-Reply-To: <1339939206-19073-1-git-send-email-pmeerw@pmeerw.net>
On 06/17/2012 02:20 PM, Peter Meerwald wrote:
> IIO sensors are not supposed to be prefixed SENSORS_, cleanup for
> consistency
Hi Peter,
I held off on this one as it may cause some issues with peoples
defconfigs. It's a question of whether we really care...
I was hoping we'd get a few more opinions.
Anyone care either way?
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
> ---
> drivers/iio/light/Kconfig | 2 +-
> drivers/iio/light/Makefile | 2 +-
> drivers/staging/iio/light/Kconfig | 6 +++---
> drivers/staging/iio/light/Makefile | 6 +++---
> drivers/staging/iio/magnetometer/Kconfig | 4 ++--
> drivers/staging/iio/magnetometer/Makefile | 4 ++--
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index f3ea90d..8bc9675 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_LM3533
> +config LM3533
> tristate "LM3533 ambient light sensor"
> depends on MFD_LM3533
> help
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 06fa4d3..5ae2737 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for IIO Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> +obj-$(CONFIG_LM3533) += lm3533-als.o
> obj-$(CONFIG_VCNL4000) += vcnl4000.o
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index 4bed30e..0f251e4 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_ISL29018
> +config ISL29018
> tristate "ISL 29018 light and proximity sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -15,7 +15,7 @@ config SENSORS_ISL29018
> in lux, proximity infrared sensing and normal infrared sensing.
> Data from sensor is accessible via sysfs.
>
> -config SENSORS_ISL29028
> +config ISL29028
> tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -25,7 +25,7 @@ config SENSORS_ISL29028
> Proximity value via iio. The ISL29028 provides the concurrent sensing
> of ambient light and proximity.
>
> -config SENSORS_TSL2563
> +config TSL2563
> tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 141af1e..d718a07 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -2,8 +2,8 @@
> # Makefile for industrial I/O Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> -obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> -obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> +obj-$(CONFIG_TSL2563) += tsl2563.o
> +obj-$(CONFIG_ISL29018) += isl29018.o
> +obj-$(CONFIG_ISL29028) += isl29028.o
> obj-$(CONFIG_TSL2583) += tsl2583.o
> obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index df5e0d4..84a6c0f 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Magnetometer sensors"
>
> -config SENSORS_AK8975
> +config AK8975
> tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
> depends on I2C
> depends on GPIOLIB
> @@ -14,7 +14,7 @@ config SENSORS_AK8975
> To compile this driver as a module, choose M here: the module
> will be called ak8975.
>
> -config SENSORS_HMC5843
> +config HMC5843
> tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
> index f2a753f..79331bb 100644
> --- a/drivers/staging/iio/magnetometer/Makefile
> +++ b/drivers/staging/iio/magnetometer/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for industrial I/O Magnetometer sensors
> #
>
> -obj-$(CONFIG_SENSORS_AK8975) += ak8975.o
> -obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
> +obj-$(CONFIG_AK8975) += ak8975.o
> +obj-$(CONFIG_HMC5843) += hmc5843.o
>
next prev parent reply other threads:[~2012-07-08 17:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-17 13:20 [PATCH] iio: remove SENSORS_ from Kconfig Peter Meerwald
2012-07-08 17:05 ` Jonathan Cameron [this message]
2012-07-08 18:37 ` Peter Meerwald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF9BDE5.7050708@kernel.org \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.