From: gregory hermant <gregory.hermant@calao-systems.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2] Add support for the Calao-systems USB-A9263
Date: Mon, 09 Jul 2012 08:39:05 +0200 [thread overview]
Message-ID: <4FFA7C89.4010505@calao-systems.com> (raw)
Hi,
Attached a new patch for the USB-A9263.
More info at <http://www.calao-systems.com>.
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
.../usb-a9263/at91bootstrap-1.16-usb-a9263.patch | 851 ++++++++++++++++++++
board/calao/usb-a9263/usb-a9263_defconfig | 102 +++
configs/usb_a9263_defconfig | 14 +
3 files changed, 967 insertions(+), 0 deletions(-)
create mode 100644 board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch
create mode 100644 board/calao/usb-a9263/usb-a9263_defconfig
create mode 100644 configs/usb_a9263_defconfig
diff --git a/board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch b/board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch
new file mode 100644
index 0000000..5798930
--- /dev/null
+++ b/board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch
@@ -0,0 +1,851 @@
+From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 5 Jul 2012 18:44:07 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9263
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9263/dataflash/Makefile | 115 +++++++++++++
+ board/usb_a9263/dataflash/usb-a9263.h | 97 +++++++++++
+ board/usb_a9263/nandflash/Makefile | 117 ++++++++++++++
+ board/usb_a9263/nandflash/usb-a9263.h | 116 +++++++++++++
+ board/usb_a9263/usb_a9263.c | 285 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S | 7 +
+ driver/dataflash.c | 6 +-
+ include/part.h | 6 +-
+ 8 files changed, 745 insertions(+), 4 deletions(-)
+ create mode 100644 board/usb_a9263/dataflash/Makefile
+ create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/nandflash/Makefile
+ create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/usb_a9263.c
+
+diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
+new file mode 100644
+index 0000000..332685e
+--- /dev/null
++++ b/board/usb_a9263/dataflash/Makefile
+@@ -0,0 +1,115 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++#CROSS_COMPILE = arm-softfloat-linux-gnu-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# DataFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=dataflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++# -Wl,...: tell GCC to pass this to linker.
++# -Map: create map file
++# --cref: add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++ $(BOARD).o \
++ main.o \
++ gpio.o \
++ pmc.o \
++ debug.o \
++ sdramc.o \
++ dataflash.o \
++ _udivsi3.o \
++ _umodsi3.o \
++ div0.o \
++ udiv.o \
++ string.o
++
++rebuild: clean all
++
++all: $(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o: $(BOOTSTRAP_PATH)/lib/string.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++ rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
+new file mode 100644
+index 0000000..40a3af8
+--- /dev/null
++++ b/board/usb_a9263/dataflash/usb-a9263.h
+@@ -0,0 +1,97 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : usb-a9263.h
++ * Object :
++ * Creation : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings */
++/* */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator. */
++/* PLL initialization is done later in the hw_init() function */
++/* ******************************************************************* */
++#define MASTER_CLOCK (180000000/2)
++#define PLL_LOCK_TIMEOUT 1000000
++
++#define PLLA_SETTINGS 0x20593F06
++#define PLLB_SETTINGS 0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI AT91C_BASE_SPI0
++#define AT91C_ID_SPI AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 8000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS (AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* SDRAMC Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM AT91C_EBI0_SDRAM
++
++/* ******************************************************************* */
++/* BootStrap Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_SPI_PCS_DATAFLASH AT91C_SPI_PCS0_DATAFLASH /* Boot on SPI NCS0 */
++
++#define IMG_ADDRESS 0x4000 /* Image Address in DataFlash */
++#define IMG_SIZE 0x40000 /* Image Size in DataFlash */
++
++#define MACH_TYPE 0x6AE /* USB-A9263 */
++#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings */
++/* ******************************************************************* */
++#define CFG_HW_INIT
++#define CFG_SDRAM
++#undef CFG_DEBUG
++
++#define CFG_DATAFLASH
++
++#endif /* _USB_A9263_H */
+diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
+new file mode 100644
+index 0000000..c453098
+--- /dev/null
++++ b/board/usb_a9263/nandflash/Makefile
+@@ -0,0 +1,117 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++# -Wl,...: tell GCC to pass this to linker.
++# -Map: create map file
++# --cref: add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++ $(BOARD).o \
++ main.o \
++ gpio.o \
++ pmc.o \
++ debug.o \
++ sdramc.o \
++ nandflash.o \
++ _udivsi3.o \
++ _umodsi3.o \
++ div0.o \
++ udiv.o \
++ string.o
++
++rebuild: clean all
++
++all: $(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o: $(BOOTSTRAP_PATH)/lib/string.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
++ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++ rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
+new file mode 100644
+index 0000000..24e2cf1
+--- /dev/null
++++ b/board/usb_a9263/nandflash/usb-a9263.h
+@@ -0,0 +1,116 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : usb-a9263.h
++ * Object :
++ * Creation : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings */
++/* */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator. */
++/* PLL initialization is done later in the hw_init() function */
++/* ******************************************************************* */
++#define MASTER_CLOCK (180000000/2)
++#define PLL_LOCK_TIMEOUT 1000000
++
++#define PLLA_SETTINGS 0x20593F06
++#define PLLB_SETTINGS 0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE 0x40000000
++
++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
++
++/* ******************************************************************* */
++/* SDRAMC Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM AT91C_EBI0_SDRAM
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
++/* Please refer to SMC section in AT91SAM9x datasheet to learn how */
++/* to generate these values. */
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP (1 << 0)
++#define AT91C_SM_NCS_WR_SETUP (0 << 8)
++#define AT91C_SM_NRD_SETUP (1 << 16)
++#define AT91C_SM_NCS_RD_SETUP (0 << 24)
++
++#define AT91C_SM_NWE_PULSE (3 << 0)
++#define AT91C_SM_NCS_WR_PULSE (3 << 8)
++#define AT91C_SM_NRD_PULSE (3 << 16)
++#define AT91C_SM_NCS_RD_PULSE (3 << 24)
++
++#define AT91C_SM_NWE_CYCLE (5 << 0)
++#define AT91C_SM_NRD_CYCLE (5 << 16)
++
++#define AT91C_SM_TDF (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings */
++/* */
++/* ******************************************************************* */
++#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
++#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
++
++#define MACH_TYPE 0x6AE /* USB-A9263 */
++#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++
++#endif /* _USB_A9263_H */
+diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
+new file mode 100644
+index 0000000..5630f99
+--- /dev/null
++++ b/board/usb_a9263/usb_a9263.c
+@@ -0,0 +1,285 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : usb_a9263.c
++ * Object :
++ * Creation : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++ unsigned int value;
++ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++ return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++
++#ifdef CFG_HW_INIT
++/*---------------------------------------------------------------------------- */
++/* \fn hw_init */
++/* \brief This function performs very low level HW initialization */
++/* This function is invoked as soon as possible during the c_startup */
++/* The bss segment must be initialized */
++/*---------------------------------------------------------------------------- */
++void hw_init(void)
++{
++ /* Configure PIOs */
++ const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++ {"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Disable watchdog */
++ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++ /* At this stage the main oscillator is supposed to be enabled
++ * PCK = MCK = MOSC */
++
++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* PCK = PLLA = 2 * MCK */
++ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++ /* Switch MCK on PLLA output */
++ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++
++ /* Configure PLLB */
++ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Configure the PIO controller to output PCK0 */
++ pio_setup(hw_pio);
++
++ /* Configure the EBI0 Slave Slot Cycle to 64 */
++ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
++
++#ifdef CFG_DEBUG
++ /* Enable Debug messages on the DBGU */
++ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++ dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++ /* Initialize the matrix */
++ /* VDDIOMSEL = 1 -> Memories are 3.3V powered */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++ /* Configure SDRAM Controller */
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_13 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 |
++ AT91C_SDRAMC_TRC_7 |
++ AT91C_SDRAMC_TRP_2 |
++ AT91C_SDRAMC_TRCD_2 |
++ AT91C_SDRAMC_TRAS_5 |
++ AT91C_SDRAMC_TXSR_8, /* Control Register */
++ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
++ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++
++#ifdef CFG_SDRAM
++//*----------------------------------------------------------------------------
++//* \fn sdramc_hw_init
++//* \brief This function performs SDRAMC HW initialization
++//*----------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++ /* Configure PIOs */
++ const struct pio_desc sdramc_pio[] = {
++ {"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Configure the SDRAMC PIO controller */
++ pio_setup(sdramc_pio);
++}
++#endif
++
++#ifdef CFG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn df_recovery */
++/* \brief This function erases DataFlash Page 0 if USER PB is pressed */
++/* during boot sequence */
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++ /* Configure PIOs */
++ const struct pio_desc usrpb_pio[] = {
++ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Configure the PIO controller */
++ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++ pio_setup(usrpb_pio);
++
++ /* If USER PB is pressed during Boot sequence */
++ /* Erase NandFlash block 0*/
++ if ( !pio_get_value(AT91C_PIN_PB(10)) )
++ df_page_erase(pDf, 0);
++#endif
++}
++/*------------------------------------------------------------------------------*/
++/* \fn df_hw_init */
++/* \brief This function performs DataFlash HW initialization */
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++ /* Configure PIOs */
++ const struct pio_desc df_pio[] = {
++ {"MISO", AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
++ {"MOSI", AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
++ {"SPCK", AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
++ {"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Configure the PIO controller */
++ pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn nand_recovery */
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed */
++/* during boot sequence */
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++ /* Configure PIOs */
++ const struct pio_desc usrpb_pio[] = {
++ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Configure the PIO controller */
++ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++ pio_setup(usrpb_pio);
++
++ /* If USER PB is pressed during Boot sequence */
++ /* Erase NandFlash block 0*/
++ if (!pio_get_value(AT91C_PIN_PB(10)) )
++ AT91F_NandEraseBlock0();
++}
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_hw_init */
++/* \brief NandFlash HW init */
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++ /* Configure PIOs */
++ const struct pio_desc nand_pio[] = {
++ {"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
++ {"NANDCS", AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++
++ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++ /* Configure SMC CS3 */
++ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
++ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
++ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC0 + SMC_CYCLE3);
++ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
++ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC0 + SMC_CTRL3);
++
++ /* Configure the PIO controller */
++ writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++ writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
++
++ pio_setup(nand_pio);
++
++ nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_cfg_16bits_dbw_init */
++/* \brief Configure SMC in 16 bits mode */
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++ writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_cfg_8bits_dbw_init */
++/* \brief Configure SMC in 8 bits mode */
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++ writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
++
++
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+
+ _setup_clocks:
++/* Test if main osc is bypassed */
++ ldr r0,=AT91C_PMC_MOR
++ ldr r1, [r0]
++ ldr r2,=AT91C_CKGR_OSCBYPASS
++ ands r1, r1, r2
++ bne _init_data /* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ ldr r0,=AT91C_PMC_SR
+ ldr r1, [r0]
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index e28e49e..4de295a 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
+ pDf->dfDescription.pages_size = 264;
+ pDf->dfDescription.page_offset = 9;
+ break;
+-
++*/
+ case AT45DB021B:
+ pDf->dfDescription.pages_number = 1024;
+ pDf->dfDescription.pages_size = 264;
+ pDf->dfDescription.page_offset = 9;
+ break;
+
+- case AT45DB041B:
++/* case AT45DB041B:
+ pDf->dfDescription.pages_number = 2048;
+ pDf->dfDescription.pages_size = 264;
+ pDf->dfDescription.page_offset = 9;
+@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+ if (!df_init(pDf))
+ return -1;
+
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
+ /* Test if a button has been pressed or not */
+ /* Erase Page 0 to avoid infinite loop */
+ df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index ba5985a..a1863d0 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -61,7 +61,11 @@
+
+ #ifdef AT91SAM9263
+ #include "AT91SAM9263_inc.h"
+-#include "at91sam9263ek.h"
++ #ifdef at91sam9263ek
++ #include "at91sam9263ek.h"
++ #elif usb_a9263
++ #include "usb-a9263.h"
++ #endif
+ #endif
+
+ #ifdef AT91CAP9
+--
+1.5.6.3
+
diff --git a/board/calao/usb-a9263/usb-a9263_defconfig b/board/calao/usb-a9263/usb-a9263_defconfig
new file mode 100644
index 0000000..8c71231
--- /dev/null
+++ b/board/calao/usb-a9263/usb-a9263_defconfig
@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
diff --git a/configs/usb_a9263_defconfig b/configs/usb_a9263_defconfig
new file mode 100644
index 0000000..d16bdc0
--- /dev/null
+++ b/configs/usb_a9263_defconfig
@@ -0,0 +1,14 @@
+BR2_arm=y
+BR2_arm926t=y
+BR2_JLEVEL=2
+BR2_PACKAGE_HOST_SAM_BA=y
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_AT91BOOTSTRAP=y
+BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR="board/calao/usb-a9263/"
+BR2_TARGET_AT91BOOTSTRAP_BOARD="usb_a9263"
+BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
+BR2_TARGET_BAREBOX=y
+BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/usb-a9263_defconfig"
--
1.5.6.3
next reply other threads:[~2012-07-09 6:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-09 6:39 gregory hermant [this message]
2012-07-09 7:20 ` [Buildroot] [PATCH v2] Add support for the Calao-systems USB-A9263 Thomas Petazzoni
2012-07-13 21:07 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFA7C89.4010505@calao-systems.com \
--to=gregory.hermant@calao-systems.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.