From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4FFFD02B.7020202@xenomai.org> Date: Fri, 13 Jul 2012 09:37:15 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1342097120.22964.YahooMailNeo@web120604.mail.ne1.yahoo.com> <4FFED232.60506@xenomai.org> In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Xenomai 2.6.0 installation Error List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Ilesh patel Cc: xenomai@xenomai.org On 07/13/2012 07:51 AM, Ilesh patel wrote: > Hello, > > Thank you for your kind reply > > I understand the error. > > I read the README file in /arch/x86/patches/ The README file shows > "Xenomai supports the x86_64,x86 architecture starting with the v2.6 > Linux kernel series." and my krenel is V2.6.32-generic. Ok, even if the README file is short, you seem not patient enough to read it. Some I am going to quote the relevant parts: "This support is provided by the interrupt pipeline (aka I-pipe) in the form of a kernel patch you have to apply against a VANILLA kernel tree, before you attempt to compile the Xenomai codebase against the latter kernel. Apply one of the patches found into this directory against the CORRESPONDING kernel release." So: for a vanilla 2.6.32 kernel, you have to use a patch with 2.6.32 in the name. And the patch will apply only to a vanilla kernel, for any other kernels, it will not necessarily apply. Please no private mail. -- Gilles.